Condition: ready for operation (used), functionality: fully functional, Year of construction: 2019, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Lhedpfx Ahsx Hwgno Uor Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: excellent (used), Year of construction: 2017, Ref:11050 . 2017 Foliant Vega 400A Laminator. New generation, very compact, single sided thermal laminator designed for heavy-duty digital outputs. Equipped with: Integrated deep pile vacuum feeder and a high-speed bump separator Non-sticky pressure roller and in-run adjustable twin decurl bar and overlap system. Pneumatic high-pressure system (with integrated compressor inside machine frame) Suitable for all jobs – all kinds of digital printed sheets lamination and high volumes of offset printed sheets size B3+ lamination too. The machine maximum speed is up to 18 m/min while performance is over 2100 sheets per hour of B3 portrait (white paper 200 gsm). Feeder: Equipped with a rising pile front separation stream feeder and with a vacuum belt head. Built-in Becker vacuum pump is used for sheets front airing and feeding head vacuum. Overlaps are controlled, in an ‘in-run’ mode. Accuracy is +/- 2 mm under-lap (in a constant speed). Fitted with a lifting plate and its capacity is a 28 cm pile of paper. Laminator: Maximum sheet size is 38 x 66 cm (which is the maximum outputs format from Xerox iGen4). The minimum sheet size is 20 x 30 cm. Compressor is integrated inside the machine frame as standard. Laminating unit is equipped with an adjustable twin decurl unit: • With a decurl blade for offset printed sheets decurling • With a decurl roller for digital printed sheets decurling (to prevent scratches on sheets printed on both sides by digital print with sensitive inks). Roll of a film is mounted on a quick-changed shaft with a film tension control breaker. Shaft capacity is up to 3000 m of the 24 - 42 microns film. Film holder unit is equipped with an in-line trim slitter and a perforating wheel. 2 x laminating rollers - a highly polished chrome roller, and a lower hard rubber pressure roller with non-sticky surface. Pressure is pneumatically adjustable. Laminating roller is heated with a dry electric system inside the roller, with a sensitive temperature sensor. Warming up time is shorter than 10 minutes. Controlled by an interactive, easy understandable icon based touch screen System includes many automation items for an easy control of the machine and a reliable lamination. Separator: Integrated bump separator (sheeter) is equipped with a pair of fast cycling rollers. Separated sheets are delivered into a vibrating jogger Laminating Films: BOPP films (24 – 42 microns) Nylon films (24 - 35 microns) Lsdpsx Nftnjfx Ah Ujhr Specification: Maximal Speed: single side 18 m/min. Feeding System: Automatic, vacuum belt, Feeder's Capacity 28 cm Overlaps: In-Run Screw control, Overlaps Accuracy ± 2 mm Paper Weight: 115–500 g/m² Main Roller Pressure System: Pneumatic Minimal Sheets Size (w×l): 20×30 cm Maximal Sheets Size (w×l): 38x66 cm Maximal Performance: 2100 B3 / hod. Temperature Control: 80–140 °C, Warming Up Time 8 min Power Supply: 230 V AC, 50-60 Hz Power: 3150 W Mechanical Parameters: Floorspace (w×l) 82×198 cm, Weight: 370 kg

Condition: excellent (used), Overview The Morgana AutoCreaser Pro 50 is a high-performance, fully automatic creasing and perforating machine for SRA3 and B3 sheets. Upgraded from its predecessor, it features the advanced Pro SmartScreen touchscreen interface, making setup quick and intuitive. Capable of handling 80–400gsm stock, the Pro 50 delivers precise, professional results at high production speeds—up to 8,500 A4 sheets per hour or 11,000 A5 sheets per hour. This 500mm machine supports vertical and horizontal creasing and is ideal for commercial printers, digital print shops, and in-plant finishing operations. The intuitive interface allows operators to select fold types, input sheet size, and make adjustments instantly, reducing setup time and improving productivity. Key Features 7" Pro SmartScreen touchscreen – easy, intuitive job setup and control Lhodpfjx Nqmtsx Ah Usr Fully automatic operation – feeds, creases, and perforates with minimal operator input High-speed productivity – 8,500 A4 sheets/hour, 11,000 A5 sheets/hour Versatile creasing – up to 16 creases per sheet, vertical and horizontal Wide stock compatibility – 80–400gsm, up to 0.4mm thickness Large sheet capacity – up to 700mm × 500mm Unlimited job memory – store and recall multiple jobs with alphanumeric naming Standard perforation – with multiple wheel options for custom finishes Why Choose the Morgana AutoCreaser Pro 50? Fast and accurate finishing for brochures, book covers, greeting cards, menus, and mailers Reduced training time with touchscreen controls and automatic setup Handles high-volume jobs without loss of precision Versatile and reliable – suitable for digital and commercial print applications Why Buy from Glendale? Professionally refurbished and fully tested – every system is serviced by our trained engineers. Expert training and ongoing support – we ensure you get the best results from your equipment. Competitive pricing on consumables – keep your finishing costs low with affordable supplies. Trusted supplier – years of experience in print finishing solutions with both new and used equipment

Condition: ready for operation (used), Flat pile feeder Touch screen navigation control with auto set plates rollers Ledpfx Ahowt Eqbj Uohr 4 plates 2 knives Side pocket SAK stream shingle belt delivery

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning Lhjdpfx Ahexp Ntvo Ujr

Condition: used, Year of construction: 1998, operating hours: 0 h, functionality: fully functional, machine/vehicle number: 8701020, overall weight: 850 kg, Dimuken 4 head Hologram Encoder , Type DC8614-H4 Year 1998 Lhjdpfx Ahermnpbj Uer Additional Imprinting device, Additional Unwinding device Pack to Pack or Roll to Roll This line is used to apply Holograms to documents requiring high security and give greater value plus visual impact Line is used but in good working order.Sold as is loaded to transport with tools and manuals

Condition: used, Year of construction: 2005, Age: 2005 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 8 Impress.Count: No counter Extras: Autoplate - Perfector - Digital Controls - Touch-screen Control Lhjdpfxox Npq Rj Ah Uer Heidelberg CD 74-8-P5-C, 8 colour CD perfecting press, Maximum sheet size: 53 x 74 cm, Age: 2005, Equipped With:-, CP 2000, Alcolor with Vario Damping, Preset, Autoplate, Technotrans Beta C ref/circ with ink temp control (Can), Alcosmart AZR, Heidelberg AirStar, Heidelberg ScrollStar, Electrical double sheet control, Heidelberg Powderstar Grafix Powder spray CAN, Intercom, Programmable roll/bla/imp. cyl. wash via CP2000, Eltex ionised blast in feeder, Steel plate in Feeder and Delivery, In production (UK), Available February 2026

Condition: excellent (used), Year of construction: 2016, Ref: 11047 . 2016 EBA 721-06 LT Guillotine 72cm Automatic guillotine. Equipped with: Electro-mechanical blade drive Hydraulic clamp drive Infinitely adjustable clamping pressure (250-2000 kgs) with optical indicators Snap-in false clamp plate with optical indicator Spindle guided electro-mechanical back gauge drive for precise positioning Air table on front and rear table Foot pedal for pre-clamping or cutting line indicator Optical cutting line indicator with LEDS Durable stainless steel working surface on front table HSS steel knives Swing cut for more cutting precision Adjustable solid steel blade carrier guided on both sides Adjustable blade depth Stainless steel side tables (left and right) Electronically guarded front table area by photocell safety guard Transparent safety cover on rear table Two-hand safety activation with repetition blocking and control for synchronous operation Automatic return of blade and clamp from every position Main switch, safety lock and key Blade changing device with covered cutting edge Knocking-up device Features: 99 programs with up to 99 steps each Up to 9 repeat measurements can be integrated in one program step Program runs automatically – with electronic cutting monitor 10-button-keyboard for pre-setting of measurement 3 memory buttons available for individual measurement setting Electronic digital display with an accuracy of 1/10 mm ‘Set Function’ key for reference measurement Electronic hand wheel with infinitely variable speed for Fine adjustment of back gauge Push buttons for fast back gauge movement (forward and reverse) Automatic measuring correction in case of back gauge displacement Memory key for repeat cuts (manual) and additional automatic memory Paper eject function with and without program mode (advancing programmable) Delete and insert mode for correcting and modifying programs Integrated calculator Self-diagnostic system with error indication on display Ljdpfxjx Nfr Rs Ah Ushr Metric and imperial changeover Specification: Cutting width: 720mm Cutting height: 80mm – 781mm Insertion depth: 720mm Front table depth: 530mm Minimum cut: 20mm – 901mm Back gauge speed: 53 mm/s Dimensions W x D x H in mm 1305/21002 x 1500/16002 x 1335

Condition: excellent (used), Overview Ledpfsx H Ankjx Ah Uohr The Jupiter 35 is a high-performance, fully automatic B2 laminator designed for print-on-demand, digital, and commercial litho production. It can feed sheets in portrait orientation, handling grain direction, sealed stocks, and coated substrates with ease. Equipped with a pallet-loading suction feeder, pneumatically controlled infeed roller, and sealed oil-heated rollers, the Jupiter 35 delivers consistent, high-quality lamination at production speeds. An adjustable decurl system, pneumatic perforation, and automatic burster ensure sheets are flat, cleanly separated, and neatly stacked on a cushion of air. Ideal for commercial printers, in-house finishing departments, and trade finishers, the Jupiter 35 combines automation, reliability, and professional-grade results. Key Features Fully automatic B2 lamination — minimal operator effort with consistent results B2 Portrait suction sheet feeding — handles coated, sealed, and digital stocks Maximum sheet size: 540 × 740 mm Production speed: up to 35 m/min Pallet-loading suction feeder — supports long runs and adjustable for different sheet sizes Pneumatically controlled infeed roller & missing sheet detection — protects film and rollers Sealed oil-heated laminating rollers — stable heat for uniform lamination Swing-out film mandrel with air shaft — fast and easy roll changes On-the-run lateral film adjustment — minimises waste Adjustable decurl bar & pneumatic perforator — ensures flat sheets and clean separation Automatic burster & air-assisted delivery — smooth sheet stacking into the jogger Centralised PLC control panel with remote diagnostics — intuitive operation Specifications Manufacturer D&K Model Jupiter 35 Max sheet size 540mm x 740mm Min sheet size 205mm x 220mm Recommended stocks 115gsm to 500+gsm Speed up to 35 metres per minute Heating system Sealed oil filled roller Core size 75mm Air requirements 15cfm at 100psi Deep pile feeding Included - 840mm Sheet seperation Included Jogger reception Included Electrical requirements 3 phase, 380v-415v Machine weight 950kg Dimensions (L)1950mm x (W)1200mm x (H)1400mm

Condition: ready for operation (used), 1 x Stitching unit 380 with Amrys 2 x Stitching headsd HK75 1 x Caliper control with reject 1 x Obluque sheet saddle monitor 1 x Remote control jogger inch 5 x Section feeders 370 with Amrys 1 x Cover folder feeder 554 with Amrys 1 x Three knife trimmer 449 with Amrys Lhjdpfx Ahjxya Eqo Usr 1 x Muller Martini Perfetto stacker delivery 450

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 012-204, PETRATTO SD78A BELT FEEDER WITH VACUUM BELTS 78CM Lhedox Nbc Ejpfx Ah Uer PETRATTO METRO 78 2.5 INDEPENDENT FOLDER & GLUER PETRATTO 4 ADDITIONAL 24V CHANNELS FOR METRO PETRATTO SMALL FOLDING R+L PLOUGHS PETRATTO BLOWER, FOLDS DISCRIMINATOR PETRATTO STANDARD TIPPER - UPPER FOLDING BUCKLE PLATE PETRATTO PROGRAMMABLE ROTATION (MAX 180) PETRATTO CRASH LOCK DEVICE PETRATTO TROMBONE PETRATTO SHINGLE DELIVERY PETRATTO HIGH BRIDGE NORDSON HOTMELT SYSTEM (3 EXITS) NORDSON HOTMELT HEAD (2.5M PIPE)

Condition: used, Year of construction: 2004, functionality: fully functional, D&K Pegasus Semi Automated Laminator with format B2 Feeder. Removed from printshop sold Ex works. Sold Ex works Have powered up machine and rollers heat up and belts turn over. Collection Tadley near reading UK The D&K Pegasus is an entry-level thermal laminating machine designed for low- to medium-volume production. When equipped with an automatic feeder, it transitions from a manual-load system to a more efficient, automated workflow. Machine Specifications (D&K Pegasus) Format Size: Designed for prints up to B2 size. Maximum Sheet Size: Typically 540 x 740 mm (varies slightly by regional configuration). Operation: Features a belt-driven in-feed and an integral burster (sheet separator) for one-man operation. Applications: Ideal for thin, economic laminates and single-sided thermal lamination. Lhsdpfx Ahex Nrf Ro Uer Feeder Options The Pegasus can be fitted with several feeder types to increase productivity, often retrofittable as your volume grows. Accufeed A2 (Common Entry Feeder): Max Sheet Size: 450 x 650 mm. Min Sheet Size: 90 x 60 mm. Min Stock Weight: 70 gsm. Features: Low-cost, efficient, and comes with a supplied compressor. Accufeed 760 / 1020 (High-End Feeders): Accufeed 760: Max sheet size 685 x 760 mm. Accufeed 1020: Max sheet size 685 x 1020 mm. Technology: Uses an Accufeed Belt Stream System and integrated vacuum pump for accurate high-speed feeding. Key Benefits of the Full System One-Man Operation: The combination of an automatic suction feeder and the integral separator allows one operator to manage the entire lamination process. Productivity: Automatic feeding removes the bottleneck of manual hand-feeding, significantly increasing sheets-per-hour. Versatility: Suitable for various digital and offset stocks with adjustable temperature controls.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery Lhodsx Ezkuopfx Ah Usr

Condition: excellent (used), Year of construction: 2017, Ref:11049 . 2017 Ideal 5221-95 EP Guillotine. 52cm programable guillotine Equipped with: Electro-mechanical blade and clamp drive Power ‘EP’ back gauge Control module Electronic hand wheel for manual back gauge positioning Infinitely variable speed control (from very slow to very fast) Optical cutting line Adjustable back gauge with narrow separations and plastic gliders Two side lays each on front and rear tables High-quality blade made from “Solingen steel” Solid steel blade carrier and adjustable blade guides Automatic clamping system, guided on both sides for evenly distributed clamping pressure Clamp can be lowered or raised independently from blade Machine and stand can be separated for transportation through narrow doors (70 cm) Side tables (left and right) SCS (Safety Cutting System): hinged, electronically controlled safety guard on the front table Transparent safety cover on the rear table Main switch and safety lock with key Electronically controlled true two-hand operation 24V controls (low voltage) Ljdpfx Asx Nfr Dsh Uehr Disk brake for instant blade stop Blade changing device with covered cutting edge Blade depth adjustment from the outside of the machine Easy blade change from the front of the machine without removing covers. Digital display for measurement readout in cm or inches (display accurate to 1/10 mm or 1/100 inch) 10-button keypad for presetting of measurement Memory key for repeat cuts | 9 programs with 9 steps in each program (up to 9 repeat cuts can be integrated into a program as one single program step) Setting of program steps via “Start” button ‘SET’ function key for reference measurement Programmable eject function – for pushing out the paper Two programmable keys for quick setting of frequently needed measurements Self-diagnosis system with error indication on display Specification: Cutting length: 520 mm Cutting height: 80 mm Narrow cut: 35 mm Table depth: 520 mm Power supply: 230 V / 50 Hz

Condition: used, Year of construction: 1995, operating hours: 176 h, functionality: fully functional, machine/vehicle number: 620414, Size 53 x 74 cm, CPC 1-04, CPtronic, Autoplate, Alcolor dampening system, Technotrans cooling and recirculation unit, all washing devices, Alphatronic 200 powder spray unit Lhedpfxsx I A Sls Ah Ujr

Condition: ready for operation (used), 1 x stitching unit 380 with Amrys 2 x stitching heads HK75 Lhjdpfjvpaubex Ah Uor 6 x section feeders 370 with Amrys ASIR3 1 x cover folder feeder 1554 with Amrys 1 x three knife trimmer 449 with Amrys 1 x OMG stacker delivery

Condition: excellent (used), Year of construction: 2017, Ref:11048 . 2017 Watkiss Auto SpineMaster Gives stitch-fold booklets superior quality and appearance of a square back finish. Features: Lodpfx Ahjx Nfrwo Ushr • SpineMaster SquareBack booklets are the preferred choice of print buyers due to their professional appearance. • Booklets can be opened flat without damaging the spine. • Flat booklets are easy to handle, stack and pack, move and store. • Overall bulk is reduced by at least one third. • The SquareBack spine can be printed on, just like a perfect bound book Specification: Up to: 1,750per hour (single pass) Up to: 1,150per hour (double pass*) *double pass mode may be used for thick books, with stiff covers; the book is automatically processed twice for optimum results. Booklet Size: From 80 x 120mm to 250 x 350mm (dependant on specification of connected equipment) Booklet Thickness: Min. 1mm / Max. 6.5mm (equivalent to approximately 30 Sheets of 80gsm bond made into 120 page booklet or equivalent)

Condition: excellent (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 1439, Size 36 x 52 cm, standard dampening, N+P unit Lsdpfx Ahex I A Rus Ujhr

Condition: ready for operation (used), 1 x stitching unit - 380 2 x stitching heads HK75Q 1 x remote control jogger inch 1 x oblique sheet saddle monitor 6 x section feeders 370 1 x cover folder feeder 1529 Lsdpfxsxxnlpo Ah Uehr 1 x three knife trimmer 449 1 x stacker delivery - Perfetto 450   Optional if needed; Centre cut for double production small size attachment for feeders additional stitching heads 

Condition: excellent (used), Year of construction: 2001, Ref:11046 . 2001 JBI James Burn BB/43H Wire-O Closing Unit Double wire booklet binder Equipped with: Hand feed area with foot operated control Auto closing unit with 2 x closing tools Lodpfjx Nfp Njx Ah Ujhr Fully enclosed Perspex guarding Hand feed & delivery table Specification: Product size, Max: 430 x 610 mm

Condition: used, Year of construction: 2016, Ref:11045 . 2016 Dürselen PB 04 N Paper Drill Free standing 4 headed paper drill Equipped with: Four drilling heads with adjustable spacing. Ledex Nfp Aepfx Ah Uehr Pneumatic cooling and lubrication for drills. Automatic drilling cycle, foot pedal control. Waste directed to outer door Drill table with adjustment, front and side margins. Table lock is automatically released. Technical data: Diameter of the drill: 2-10 mm, Stack height: 60 mm.

Condition: excellent (used), Year of construction: 2007, Ref:11044 . 2007 Renz Autopunch AP 360 Off line machine for spiral wire punching Equipped with: Punch sizes: 3:1" round & square hole + thumb cut / 2:1 round hole Ledpsx Nfppjfx Ah Ushr Jogger delivery Max. format: 360 x 360 x 2.5 mm

Condition: excellent (used), Year of construction: 2009, Ref:11043 . 2009 Horizon HT-30 Trimmer Excellent condition - Only 2.2m cuts! For fully automatic three knife trimming of piled or single bound books off-line. Lhsdpfxjx Nfnls Ah Usr Quick, menu guided set-up, LCD on-screen instructions for lower skilled operation. Comprising; HT-30 Trimmer with stacker infeed to integral register table Digital control panel with LCD monitor for size setting and fault indication Hydraulic clamping keeps the book/pile firmly in position Diagonal cutting action for a precise finish of all three sides Including A & B top plates, spare knives & tools. Specification: Book Size, Max: 300 x 300 mm Min: 100 x 142 mm Pile capacity : 2 -- 51 mm Mechanical speed, Max: 200 cycles/hr. Production example, 1,000 books/hr. with 5 x 10 mm books in pile. Voltage frequency: 3-Ph, 200/220/400V, 50/60Hz.

Condition: excellent (used), Year of construction: 2009, Ref:11042 . 2009 Horizon BQ-270 Excellent condition - Only 409,000 books produced! Single clamp solo binder designed for operation by one person. With auto calliper for automatic size setting Comprising: Touch-screen auto setting of thickness and cover scoring. Hand feed station Milling & roughing unit with dust bag Hot-melt spine glue unit with side gluing discs Automatic cover feeder with pressing unit Chute delivery unit Including tools, manuals and accessories Accessories: Auto calliper for automatic size setting Specification: Book size, Max: 660 x 320mm Min: 240 x 135mm Cover size, Max: 320 x 310 mm Min: 135 x 115 mm Lodsx Nfmhjpfx Ah Ujhr Thickness, Max: 50mm Min: 1mm Max speed : 500 cycles/hr.

Condition: excellent (used), Year of construction: 2016, Ref: 11041 . 2016 Horizon Stitchliner 5500-S. Excellent condition - Only 1.6m on the counter! Fully automatic setting Saddle Stitched Booklet System. Features: Lhsdpox Nflwsfx Ah Uor • 10.4” icon-based 200 job memory colour touchscreen • Simple, fast set-ups by non-specialist finishing operators • Advanced all-system automation • Make-ready in seconds, next-to-no-waste, on-demand working • Works from flat-sheet 4-page sections • No need to pre-fold • Integrated automatic set-up 3-knife trimmer • No need to pre-trim • Score, plough fold, registration and genuine saddlestitch • High quality books with sharp spine definition • High efficiency from runs-of-one Comprising: CF-400 feeder with touch-screen control ST-40 Stacker /bypass to; ACF-40 Accumulator/Folder with double gate-fold to; SPF-30S Saddle stitcher with 2 x Hohner 43/6S stitching heads to; HTS-30S Three knife trimmer unit with hand-feed station TB-30 extraction system LC-20 Long belt delivery Specification: Max sheet size: 350W x 500L mm Min sheet size: 148 x 210 mm Max stitch thickness: 6 mm. Production speed up to 6,000 booklets per hour, dependent on stock