Condition: excellent (used), Hilge MAXA 200-400-CN Centrifugal pump Bdjdpfx Ao Ad Rifsbuoi Single stage end suction centrifugal pump, mounted on skid with Siemens 18.5Kw motor, flow rate 400M3/h

Condition: excellent (used), Seepex BN176L Screw pump Bdode Ad Rdcspfx Abuji Compact standard eccentric screw pump, designed for efficient pumping of low to high viscosity media, with or without solid particles, with Nidec variable speed inverter and Nidec 4Kw motor, 3Ph

Condition: excellent (used), Lowara FHE50-160/55P Centrifugal pump Bdedpo Ad Rfyjfx Abuei Unused, end suction centrifugal pump, 316 stainless impellers, suitable for pumping hot or cold mildly aggressive liquids, with 5.5Kw motor, 3Ph

Condition: good (used), Hilge MAXANA-AD-65-200 Centrifugal pump Bedpfj Ad Rkvsx Abuedi Single stage, heavy duty sanitary centrifugal pump, 2900 RPM, 15.0 KW, Flow 100 m3/h, 3Ph

Condition: good (used), Grundfos NB65-125/137 Centrifugal volute pump Single stage centrifugal volute pump, 7.5Kw, 2910 RMP, 1916 Ltr/min, 3Ph Bedpfx Ae Ad Rbzobujdi

Condition: used, Elektror SD-6/S892 German Industrial Side Channel Vacuum Pump / Blower (2.3 kW, 400 V), Used Equipment Technical Data: Manufacturer: Elektror Airsystems / Karl W. Müller (D-7300 Esslingen, Made in Germany) Type: SD-6 / S 892 Serial No.: 806166 Overall Dimensions (W × D × H): 400 × 460 × 430 mm Power (50 Hz): 2.3 kW (2800 RPM) Power (60 Hz): 3.1 kW (3360 RPM) Supply Voltage: 400 V (3-phase) / 220–290 V / 380–500 V Current Consumption (50 Hz): 9.2 A (Δ) / 5.3 A (Y) Maximum Pressure / Vacuum (50 Hz): 300 mbar / 300 mbar Airflow (50 Hz): 4.6 m³/min (276 m³/h) Bdedo Ahqmdspfx Abusi Airflow (60 Hz): 5.6 m³/min (336 m³/h) Protection Rating: IP54

Year of construction: 2020, condition: new, ARTES DN150 PN100 Pneumatic Control Ball Valve – ProTACT – SAMSON 3730-3 For sale: Industrial control ball valve manufactured by ARTES Valve & Service, equipped with a ProTACT pneumatic actuator and SAMSON 3730-3 HART positioner. Complete assembly, supplied in a wooden transport crate. Valve specifications: Bedpfo Ahic Hox Abusdi * Manufacturer: ARTES Valve & Service * Type: Control Ball Valve 150 W * Nominal diameter: DN150 * Pressure rating: PN100 * Operating pressure: 47 bar(g) * Operating temperature: 385°C * Body material: 1.0460 * Kvs value: 230 m³/h * Opening angle: 90° * Year of manufacture: 2020 * Serial number: 3162026.1 * Tag number: 83-PCV-800 * Flanged connections Pneumatic actuator: * Manufacturer: ProTACT GmbH * Type: PRY.B2.401S.04.2530KΦ100/ * Reference: HPY-B2-401-SRC4+HT * Supply pressure: 4–6 bar * Temperature range: −15°C to +150°C * Spring action: Clockwise (CW) * Serial number: IS-200162-1-1 Positioner: * Manufacturer: SAMSON * Model: 3730-3 * Type: HART-compatible pneumatic positioner * Input signal: 4–20 mA DC * Maximum supply pressure: 7 bar * ATEX marking * Integrated position indication and diagnostics Condition: Excellent visual condition, stored in protective packaging inside a wooden crate. Operating condition has not been independently verified. Location: Rotterdam, The Netherlands Delivery terms: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty or returns.

Condition: used, Used Gericke type N450x800 MK2 nibbler. Unit has mild steel body with stainless steel 4-blade rotor, screen frame & screen. Unit direct driven with motor/gearbox. Has approximate throughput capacity of 30,000 l/h (product dependent). Bedpfx Aszvybwebusdi

Condition: used, Hosokawa Alpine Turboplex Classifier for ultrafine classification of dry powders. Model 500 ATP-NG (New Generation). Classifier wheel designed for reduced pressure drop and hence power consumption. Classifier manufactured in 2002 for project in Turkey. In storage for the last 8 years. Installed power - 22 kW. Airflow - 7500 m3/hour. Fineness range - 97% passing 120 - 8 micron. Can be used for separation of powders or for operation in closed circuit with a mill. Feeding introduced either by gravity from above or in airstream from below. Scope of supply includes 55 kW exhaust fan to generate airflow through classifier system. PPDS can supply ancillary equipment and controls to complete system if required. Equipment is offered in "as is" condition with no warranty given or implied. PPDS can provide a full refurbishment service. Inspection is invited at our premises in Uttoxeter, Staffordshire, United Kingdom (close to East Midlands, Birmingham and Manchester airports). Three machines available, each with an exhaust fan. Powder Process Design Services Ltd has been supplying equipment and systems to the industrial minerals sector for over 20 years. We specialise in the design and supply of minerals processing systems using a combination of new and s/hand refurbished equipment. With approaching 40 years experience we aim to deliver projects that meet and indeed exceed expectations. We have satisfied customers throughout the world, including, the United States, South America, New Zealand, South Africa the Middle East and the UK and Ireland. Bdodpfx Abjzvgl Asusi Please check out our other listings and subscribe to our stock list.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 30,745 h, functionality: fully functional, overall weight: 2,700 kg, power: 388 kW (527.53 HP), type of input current: three-phase, number of chambers: 3, Equipment: documentation/manual, We offer this ready-to-use Lauber L-ENZ 370 drying system, manufactured in 2019. – professional wood dryer, 388 kW + 3 drying containers Technology from the German manufacturer LAUBER Trocknungstechnik, manufactured in 2019, serial number 41199. The equipment is suitable for utilizing excess heat from a boiler, biogas plant, cogeneration unit, biomass boiler, or other heat source. Technical parameters: - Manufacturer: LAUBER Trocknungstechnik - Type: L-ENZ 370-4 - Serial number: 41199 - Year of manufacture: 2019 - Thermal output: approx. 388 kW - Fan: 11 kW - Power supply: 400/230 V, 3~NPE, 50 Hz - Automatic LAUBER control - Touchscreen control panel - Fan frequency inverter - Circulation pump control - Heat exchanger - WILO circulation pump - Complete electrical installation and switchgear Bodoz I Thrspfx Abujdi - Complete technical documentation The technical documentation states a thermal output of 388 kW, operating temperatures of 90/65 °C for the heating water, and a water flow rate of 15.2 m³/h. The weight of the unit itself is approximately 2,700 kg. Zeichnung_LENZ_370_4_mit_techni… Drying containers The offer includes: 3 × drying container - Volume of one container: 15 m³ - Total capacity: 45 m³ - The containers are designed for drying material using the LAUBER hot-air system. Suitable applications: The technology is particularly suitable for: - 🌲 firewood - 🌲 wood chips - 🌲 wood biomass - 🌲 sawdust - 🌲 other loose wood materials - or other materials depending on the specific drying technology The LAUBER system uses warm air, which is blown through the material being dried in the containers. The manufacturer uses it for drying wood chips, firewood, and other loose materials. lauber-holztrockner.de Dimensions of the main unit Approximately: 4,630 × 2,390 × 2,750 mm Weight approx. 2,700 kg. Condition: The technology is unused and offered for sale. Complete technical documentation is available, including electrical diagrams, technical drawings, and the manufacturer's documentation. Condition: ready to use Type: drying system If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Bdodpfx Abjyz R Unouji Dimensions: 700mm X 1450mm

Condition: used, 1 x DCE Dust Extractor Unit Bodpjz Ap Srofx Abusdi

Condition: used, Used Cuccolini model VPM900 2/X stainless steel 3-deck screen. Screen measures approximately 900mm diameter. Unit has 0.73Kw, 1440rpm BOMEC vibrator motor. Weight: Estimated: Kg200.0 Bdjdpfeygvncjx Abuei Dimensions: 1100mm X 1100mm Equipped With: Fitted with 300 micron & 500 micron ball tray screens. Can also include spare 710micron ball tray screen.

Year of construction: 2003, condition: used, Manufacturer: GEA Process Engineering S.A.S. Model: Batch Formula Coaxial Manufacturer’s description: Food preparation tank Year of manufacture: 2023 Identification numbers: 2023/01 – 2023/02 – 2023/03 Machine type: Preparation vessel with high-shear mixer at the bottom of the vessel and coaxial mixing + scrapers Application: Food product preparation Function: Batch mixing, dispersion and emulsification Set - Quantity available: 3 identical units - Storage condition: disassembled, stored on the Osertech premises Tank specifications - Volume: 5,000 L - Useful volume: 3,000 L - Pressure: -1 / 3 barG - Temperature: 0–100°C - Jacketed : -1/5 barG; 145°C - Maximum dry matter content: 80 per cent - Maximum viscosity: 50,000 cP - Maximum powder feed rate: 100 kg/min - Material of parts in contact with the product: AISI 316L stainless steel - Tank bottom: high-speed agitator - Domed lid with manhole secured by knobs - CIP/NEP cleaning balls - Inspection window - Pressure gauge at the top Vacuum pump - Manufacturer: Busch - Model: LX 0330 C AM0 - Ultimate pressure: 33 mbar High-shear mixer - Rotor / stator - Power: 90 kW Coaxial agitation - Agitation unit manufacturer: PMS – Process Mixing Solutions - Scraper impeller with scrapers - Propeller shaft: 2 rows of propellers offset by 60° Gear motor 1 - Power: 11 kW at 1,465 rpm - Output speed: 21 rpm Gear motor 2 - Power: 9.2 kW at 1,470 rpm - Output speed: 53 rpm Requires a new electrical box (power/control). This request may be subject to a separate quotation. Bodpfj Ahkz Ujx Abuodi

Condition: like new (used), Year of construction: 2020, operating hours: 2 h, functionality: unexamined, machine/vehicle number: HY-1000LPH, input voltage: 220 V, total height: 2,000 mm, total width: 1,000 mm, total length: 2,300 mm, energy consumption: 4 kWh, Equipment: documentation/manual, Reverse osmosis unit, purchased in 2020, and only tested once in 2024. The machine is being sold as is. Bjdpfx Asz Iqrnjbusdi

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 4,000 mm, total width: 2,550 mm, total length: 13,900 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 60 dB, input current: 150 A, energy consumption: 75 kWh, Equipment: documentation/manual, rotational speed infinitely variable, Mobile treatment system for digestate, slurry, and slaughterhouse wastewater Biogas plants and animal husbandry operations are facing increasing costs for the disposal and transport of liquid digestate and slurry. This system treats the wastewater on-site, separating it into clean permeate and a nutrient-rich concentrate. The permeate can be discharged, used for irrigation, or as utility water, and the concentrate can be used as fertilizer. The volume that needs to be transported is significantly reduced. The entire system is mounted on a trailer. It is delivered, connected, and put into operation. Foundations, buildings, or permits for permanent installations are not required. PROCESS 1. Pre-separation: equalization tank, peristaltic pump, two cyclones for the removal of sand and heavy solids 2. Ozone oxidation reactor: oxidative decomposition of the organic load with ozone directly in the water stream 3. Lamella separator: separation of coarse suspended solids 4. Microflotation (DAF): separation of suspended particles with microbubbles and ozone 5. Multi-layer filter: fine separation before the membrane stage 6. Reverse osmosis: open-channel modules with parallel spacers, up to 70 bar, very fouling-tolerant. The RO concentrate is returned to the DAF. RESULTS FROM PILOT OPERATION (Evaluation by the Fraunhofer Institute) Biogas digestate (decanter): - COD: over 20,000 mg/l in the influent, 12 mg/l in the permeate - Total nitrogen: 4,800 mg/l in the influent, 25 mg/l in the permeate - N removal: 99% Slaughterhouse wastewater: - COD: over 20,000 mg/l in the influent, 26 mg/l in the permeate - Total nitrogen: 2,750 mg/l in the influent, 120 mg/l in the permeate - N removal: 95% Pig slurry (separated): - COD: over 20,000 mg/l in the influent, 34 mg/l in the permeate - Total nitrogen: 2,500 mg/l in the influent, 180 mg/l in the permeate - N removal: 91% The values are from pilot operation and laboratory validation. We will determine the performance for your wastewater after a water analysis, and we can also offer an on-site trial run. YOUR ADVANTAGES - Reduced volume for storage, transport, and application - Permeate can be used for discharge, irrigation, or as utility water - Concentrate can be used as fertilizer - Mobile: can be used at different locations, trial run without investment - Energy-efficient ozone oxidation, power consumption per m³ on request - Fully automatic PLC control APPLICATIONS - Biogas plants: digestate treatment after the decanter - Pig and cattle farming: slurry treatment - Slaughterhouses and the food industry - Other industrial wastewater with high organic loads, after evaluation TECHNICAL DATA System type: mobile wastewater treatment, ozone oxidation + DAF + RO Design: 40-ft trailer Process stages: cyclones, ozone oxidation reactor, lamella separator, DAF, multi-layer filter, reverse osmosis RO modules: open-channel, 26.5 m² per module, up to 70 bar COD influent: over 20,000 mg/l (pilot) COD permeate: 12 to 34 mg/l (pilot) N removal: 91 to 99% (pilot) Control: PLC, fully automatic Electrical: 400 V / 50 Hz, connected load 75 kW, fuse rating 150 A MARKETING - Rental with or without operation - Treatment per m³: RIEFILT provides and operates the system; you pay per treated cubic meter - Purchase on request - On-site trial run possible to confirm the performance data NOTES ON THE INFLUENT Bdodpfxjw Uf Ihj Abuoi For the design, we need an analysis of your wastewater (at least TS, COD, N-total, NH4-N, conductivity, pH) and the

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Bodsz Rv Tdspfx Abuodi Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Year of construction: 2018, condition: like new (used), For sale: a gas-powered blower with an explosion-proof EX motor, Aerzen GM 25S, adapted for operation with gas and in potentially explosive environments. Bdsdpfo Afurysx Abuoi Unused.

Condition: used, For sale: API Heat Transfer SIGMA industrial plate heat exchanger, manufactured by API Schmidt-Bretten GmbH & Co. KG, Germany. The unit was manufactured in 2019 and comes from an industrial installation. Technical specifications: * Manufacturer: API Heat Transfer / Schmidt-Bretten * Model: SIGMA M 13 NBN * Equipment type: Gasketed plate heat exchanger * Year of manufacture: 2019 * Serial number: PA-118673 Bdjdpfxe Agxgas Abusi * Maximum allowable pressure: 10 bar * Maximum allowable temperature: 150°C * Dry weight: 155 kg * Connections: Flanged * Construction: Bolted plate pack with removable plates Condition: Used industrial equipment, dismantled from an industrial installation. The heat exchanger shows normal signs of previous use, including some surface oxidation and wear. The unit has not been pressure-tested or functionally tested by us. Original operating instructions are included. Suitable for industrial heating, cooling, and heat recovery applications, subject to verification of process compatibility and technical specifications. Location: Rotterdam, The Netherlands Delivery: EXW Rotterdam Worldwide shipping can be arranged upon request. Sold as is, where is, without warranty, claims, or returns. Please contact us for further information or a quotation.

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, filter area: 18 m², pressure: 10 bar, cake thickness: 25 mm, overall weight: 2,000 kg, number of chambers: 28, Used, refurbished Häcker chamber filter press, Type KFP 630/28. Plate format 630 x 630 mm, volume 220 liters, filtration area 18 m². 28 filter plates, cake thickness 25 mm, maximum pressure 10 bar, with black PP filter cloths. Bjdpfx Ajz Dgbwobusdi Equipped with mounted Häcker piston pump (flow rate 2.5 m³/h), with compressed air tank, mini-compressor. With electrical cabinet. Filter press installed in a 20'' dry container with an opening underneath (drawing available). Approximate dimensions: 3200 x 1000 x 1500 mm, weight 2000 kg. With technical documentation.

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also Bdedpfx Abjz Ai Tpousi - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, type of input current: three-phase, volume flow: 1,000 m³/h, Equipment: documentation/manual, Welding fume extractor, dust collector, filter, pneumatic, vacuum-based, IVAT. For welding, grinding, and all types of dry dust. Filter cleaned pneumatically with compressed air (manually). Model: Flex-22 Year of manufacture: 2018 Bsdpfx Aboz R Shleuedi Fan power: 1.1 kW Capacity: 1000 m3/h Cartridge-type filter element. Extraction arm, approximately 2.5 m long. Stock number: 1168

Condition: good (used), WAM mixer, paddle mixer Manufacturer: WAM Type: WBHX1200M/0CK Completely constructed from stainless steel Motor power: 15 kW Mixing shaft speed: 111 rpm Equipped with a completely new drive system (electric motor, gearbox, belt drive, shaft coupling, stainless steel motor base) Fitted with a new pneumatic actuator for discharge flap opening Various electrical components present (excluding control cabinet) Mixing capacity: liters See our other listings VMA Wekerom Bedpfexnkghjx Abuedi

Year of construction: 1998, operating hours: 88 h, condition: excellent (used), For sale: water pump, Bodpfx Aez Skxlobusdi - BBA B156 TW GMC. - Year of manufacture: 1998. - Engine: 11 kW / 1460 rpm. - Operating hours: 88. - Capacity: 180 m3/h. - Condition: excellent/like new.

Condition: used, Year of construction: 2024, 3 horizontal, fully insulated stainless steel storage tanks are offered for sale. Nominal volume: 30000liters per tank. Gross volume: 31190liters per tank. Permissible operating pressure: -0.1 to +0.6bar. Permissible operating temperature: -10 to +100°C. Material: stainless steel 1.4571. Outside diameter: 2900mm. Length over heads: 5170mm. Equipped with complete insulation, walkable steel structure providing access to the connections and nozzles, and a support frame. Total weight: approx. 5100kg per tank. Handed over fully flushed and cleaned. Inspection possible by arrangement. Bdjdpe Aga Ifofx Abuoi