Used Roll benders, manual for sale (38)

Condition: excellent (used), Year of construction: 2001, GEKA R 8 three-roll bending machine, 2040 x 1.0 mm, used - Three-roll, asymmetrically mounted, made of high-strength steel - Side stand with solid welded construction Fjbvswhf T Soai N Dogb - Quick rear roll adjustment - Crowned rollers to compensate for deflection - Bending length 2040 mm - Weight approx. 300 kg - Year of manufacture 2001 Location: arriving at warehouse 54634 Bitburg - Available at short notice

Condition: new, HR300 Rogi mini roller Roller capacity ----- 1 mm Working length ----- 300 mm Fgebvaega Tzboi N Deb Roll diameter ----- 30 mm Weight ----- 10 kg

Condition: excellent (used), Technical specifications: Working width: 2050 mm Max. bending capacity for mild steel St40: 6.0 mm Max. pre-bending for mild steel St40: 4.0 mm Top roller diameter: 170 mm Side lower roller diameter: 170 mm Middle lower roller diameter: 145 mm Cone bending device Hardened rollers Working height: 800 mm Mobile control panel Fgjbvjwdwiqeai N Deb Hydraulic folding bearings CE mark Motor power: 2.5 kW Dimensions (length x width x height): approx. 3600 x 1200 x 1200 mm Weight: approx. 3 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, sheet thickness steel (max.): 1 mm, roller (top) diameter: 56 mm, roller diameter: 56 mm, roller (bottom) diameter: 56 mm, - Capacity 1050 x 1 mm - Roll diameter 56 mm - Conical roller - Swivel top roller Fgjbvai Nsr Ixpho Dsb - Documentation

Year of construction: 1985, Condition: good (used), machine/vehicle number: xxxx, Technical data: - Bending operation and rolling operation by hand, - max. working width 1020 mm - max. material thickness St 40 1,25 mm - bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 85 mm Fgsbvajf S Tg Toi N Dsb - max. adjustability bending beam 20 mm - shaft diameter 55 mm - upper shaft swivels out - rear shaft parallel + inclined adjustable - space requirement approx. W 1500 x H 1400 x D 750 mm - weight approx. 400 kg

Condition: new, KR is a series of manual round bending machines for repair and one-off production. With an astonishingly high bending capacity, this machine can be used to shape sheet metal with strength and feeling. The machine with hardened rollers can bend conically and is a robust supplementary machine for metal workshops. Fobjn Hthbovai N Dsgb

Condition: excellent (used), Year of construction: 1976, Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Condition: Machine is in very good condition (was only used for training) Febvelk R Dneai N Djgb -max. bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: pin controlled, two-speed, each with pins for left/right to adjust the angle -Equipment: adjustable counterholder bars standard bending tool -Dimensions: 750/660/H970 mm -Weight: 356 kg

Condition: good (used), manufacturer: FASTI 1020X1 Fgjbvaijra A Hge N Deb max plate width: 1020mm max plate thickness: 1 mm roller diameter: 50mm The upper cylinder can be removed for easy workpiece removal machine dimensions: length: 130 cm core: 100cm width: 50cm weight: 240 kg

Condition: good (used), Year of construction: 1996, Technical specifications: Working length: 3100 mm Max. bending capacity: 12.0 mm Pre-bending: 8.0 mm Top roller diameter: 250 mm Bottom roller diameter: 230 mm Hydraulic folding bearing Conical bending device Extended rollers for profile bending Control panel with digital display Motor power: 7.5 kW Dimensions (length x width x height): approx. 4300 x 1750 x 1350 mm Fgsbowbv Efevai N Djb Weight: approx. 6 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller - Swivel top roller - Documentation Febvaier Nvhao N Degb

Condition: good (used), Year of construction: 2012, From liquidation: Metallkraft RBM 1030-10 Year of manufacture 2012 Bending capacity S 235JR: max. 1.0 mm Bending capacity VA: max. 0.75 mm * Fgsbvaetu N Iboi N Deb Bending capacity aluminum: max. 1.2 mm Roll diameter: 56 mm Bending diameter: min. 84 mm Wire insert grooves: Ø 6 / 8 / 10 mm Dimensions (LxWxH): 1400 x 700 x 1120 mm Weight: approx. 185 kg

Condition: new, KR is a series of manual round bending machines for repair and one-off production. With an astonishingly high bending capacity, this machine can be used to shape sheet metal with strength and feeling. The machine with hardened rollers can bend conically and is a robust supplementary machine for metal workshops. Fgsbvaiov Iaz Sj N Djb

Condition: used, working width: 1020 mm metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm Fobvjda I Itoai N Djgb space needed: 1370 x 570 x 1100 mm

Condition: used, Year of construction: 2020, sheet width 1050 mm plate thickness 1.50 mm roll length 1060 mm roll diam. toproll 68.0 mm engine output manuell kW weight 280 kg range L-W-H 1930 x 700 x 1160 mm Exhibition machine from 2020 Condition as NEW Special price on request Fobvaju Tv Eloi N Degb Equipment: - manual asymmetrical 3-roller round bending machine - with manual drive - manual folding bearing - manual delivery of the rear roller - Bending rollers with profile grooves: 4/6/10 mm

Condition: good (used), machine/vehicle number: 05 125 001, Rounding machine, motorized, foot holder, man. rear angle feed, emergency stop line, very good condition Machine will be repaired, checked and cleaned by a specialist and will then be fully functional. Test run will be carried out. Sheet width: 1020 mm Sheet thickness: 1.5 mm Color: grey Total power requirement: 16 A Machine weight: 300 kg Fobjur Hgfjvai N Dogb Space requirement: 1500 x 500 x 1000 mm Shaft diameter: 65 mm

Condition: new, roller (top) diameter: 46 mm, roller diameter: 46 mm, roller (bottom) diameter: 46 mm, bending length: 1,050 mm, - Capacity 1050 x 0.8 mm - Roll diameter 46 mm - Conical roller - Swivel top roller - Documentation Fobvai Njr H Hane Djgb

Condition: new, bending length: 1250sheet thickness: 3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- Fgsbved Ab Tyjai N Djb - Hardened rolls EURO 550,-- - Variable speed of rotation  We have many references!

Condition: new, Year of construction: 2025, Angle Bar Bender manual Model 100 E German quality Capacity cold (St 37): steel up to 100x6 mm solid round 18 mm with length stop with 2 Radius-toolings weight around 27 kg Fgebvai Nefhdfvo Deb

Year of construction: 1996, Condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm Fsbebpytpjvai N Dogb weight: 170 kg space needed: 560 x 1570 x 1080 mm

Condition: used, Year of construction: 2020, sheet width 1550 mm plate thickness 2.0 mm roll length 1570 mm roll diam. toproll 90.0 mm engine output manuell kW weight 560 kg range L-W-H 2580 x 700 x 1250 mm Exhibition machine from 2020 Condition as NEW Fsbvai Neu Tv D Is Dsgb Special price on request Equipment: - manual asymmetrical 3-roller round bending machine - with manual drive - manual folding bearing - manual delivery of the rear roller - Bending rollers with profile grooves: 4/6/10 mm

Condition: good (used), Year of construction: 1998, machine/vehicle number: 1223, with wire insert grooves, folding groove, manual rear roller feed, wheel with scale, Machine is repaired, checked and cleaned by a specialist and is then fully functional. Fsbvjtty Nceai N Degb Test run is carried out Sheet width: 1030 mm Sheet thickness: 1.1 mm Color: emerald green Machine weight: 190 kg Space requirement: 1300 x 400 x 400 Roller diameter: 52 mm

Condition: new, bending length: 1550sheet thickness: 2.5upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll Fgjbvasd Ab Twsi N Deb - Body cover EURO 362,-- - Hardened rolls EURO 650,-- - variable speed of rotation  We have many references!

Condition: good (used), working width: 1040 mm metal sheet thickness: 1,25 mm upper roller-Ø: 56 mm Febvai Njdt Dqws Dogb below roller-Ø: 56 mm weight: 190 kg space needed: 1450 x 460 x 1030 mm

Year of construction: 1996, Condition: as good as new (ex-display), machine/vehicle number: 910/96/221, working width: 1030 mm metal sheet thickness: 1 mm upper roller-Ø: 60 mm below roller-Ø: 60 mm weight: 170 kg Fgobeb N Eu Iovai N Deb space needed: 560 x 1570 x 1080 mm

Year of construction: 1998, Condition: as good as new (ex-display), machine/vehicle number: 3163, working width: 1050 mm metal sheet thickness: 1,5 mm upper roller-Ø: 70 mm below roller-Ø: 70 mm weight: 320 kg Fgobjbpythovai N Djb space needed: 700 x 1300 x 1100 mm