Condition: new, Year of construction: 2025, Automatic sanding machine KÜNDIG PERFECT-3 1350-REdXi_LL/Bs incl. structure unit Robust 3-belt sanding machine for the highest demands Constant working height thanks to top section adjustment Working width 1350 mm Passage height max. 205 mm (up to 18.5 kW main drive motor) Sanding belt dimensions for "R" and "Ed-L": 1350 x 2000 mm Sanding belt dimensions for "Xi-L": 150 x 4700 mm Unit "R" contact roller ➢ Grooved rubber contact roller hardness 80 Sh ➢ Contact roller level infinitely height-adjustable via touch screen ➢ Motorized lifting/lowering of the contact roller according to unit selection ➢ Increased sanding belt speed Unit "Ed-L" sanding pad diagonal ➢ Electronic sanding pad with segment width 22 mm (swiveling special version), with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Infinitely variable sanding belt speed (with PLC storage) ➢ Additional sanding pad insert "Xi-L" cross sanding unit in the machine frame Electronic sanding pad with segment width 22 mm with variable edge pressure, automatic pressure control and storage of the sanding pad segments ➢ Cross sanding belt supported by lamellar belt ➢ Infinitely variable sanding belt speed (with PLC storage) Perfect-3 1350-REdXi-LL - Main motors ➢ 1st unit: 18.5 kW (25 hp) / ➢ 2nd unit: 11 kW (15 hp) / ➢ 3rd unit: 16 kW (MPM) (22 hp) / 400 V/50 Hz 400 V/50 Hz 400 V/50 Hz - Workpiece feed ➢ Fabric-reinforced rubber transport carpet ➢ Rubberized carpet drive roller ➢ Motor: 2.2 kW (3 HP) / 400 V/50 Hz ➢ Speed: infinitely variable 3 - 15 m/min - Vacuum device ➢ On feed table ➢ Additional perforation of the transport carpet over 200 mm ➢ Vacuum generator: 2.2 kW (3 hp) / 400 V/50 Hz - Sanding belt cleaning ➢ Air blade for sanding belt cleaning of the two units "Ed-L" and "Xi-L" insert-controlled, with suction ducts and driven by blower 1.1 kW (1.5 HP) 400 V/50 Hz - Pressure elements ➢ Inlet: ➢ Intermediate units: ➢ Outlet: parallel spring-loaded, ground steel pressure roller ⌀ 50 mm rubberized pressure roller ⌀ 50 mm Rubberized pressure roller ⌀ 50 mm 1. grooved rubber contact roller, 80 sh. 2.diagonal sanding pad with lacquer finish and air blade for sanding belt cleaning 3.cross sanding unit with lacquer equipment and air blade for sanding belt cleaning Main motors: 18.5 + 11 + 16 kW / 400V / 50 Hz Additional equipment: W61: Structuring burr at the outlet B 10: Structuring brush Abralon, Mink W71: Additional quick-change shaft for brush 1350 Cgob Hadqer Hr Dzjget B 12: Brass-plated steel wire brush 1350 C 10: LED package A 20: 5 x motorized regulating flaps (2x D=180 + 3 x D=150) Working width 1350 mm Max. passage 205 mm Sanding belt dimensions: 1350x2000 mm and 150x4700 mm 10" touch screen with Industry 4.0 control Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 1996, Functionality: fully functional, VERY WELL MAINTAINED MULTI-PURPOSE SURFACE SANDING MACHINE WITH CROSS AND LENGTHWISE BELT; SUITABLE FOR WOOD CALIBRATION SANDING; WOOD SURFACE SANDING AND INTERMEDIATE LACQUER SANDING. Working width max. 1,300 mm Conveyor belt with vacuum device Cjb Hadqjumtg Ijgsgt Transport blasting device with pressure regulator Feed motor 1.5 KW Feed rate 3 - 15 m/min CSD - Computer controlled selective pressure regulation technology with 2 mm tolerance compensation Spacing of the control rollers 16 mm, pressure shoe pitch 48 mm, switch distance 82 mm Unit equipment: 1) Cross sanding unit Belt dimensions with lamellar intermediate belt Sanding belt dimensions 15 x 4,800 mm Sanding belt speed infinitely variable can therefore be used for surface and lacquer sanding 2) Longitudinal sanding unit with sanding drum and sanding pad combined, therefore suitable for calibration sanding as well as for wood and veneer surface sanding Infinitely variable sanding belt speed, therefore also suitable for can also be used for lacquer sanding Sanding belt dimensions: 1,350 x 2,620 mm Control system: Machine control unit on the right-hand machine control unit 20 programs can be stored Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 tons

Condition: new, Hoku KS 150 edge sander manufactured by Rehnen. The upper section is made of heavy-duty cast iron with a built-in three-phase motor 380 V, 2.2 kW, 2850 rpm; the machine is equipped with a built-in switch-plug combination; Motor protection switch and main switch in accordance with VDE regulations; Sanding belt back panel dimensions: 850 x 150 mm; steel table height adjustable by spring pressure; belt dimensions: 150 x 2280 mm; The sanding belt back panel is covered with a graphite sliding coating; The machine is supplied with an assortment of sanding belts; A square and miter gauge is also included. The machine is dust-tested (GS) by Holz-BG-Stuttgart when connected to a central extraction system with an air speed of at least 20 m/s. - Swivels 90-180° - Motorized belt oscillation - Small support table on the idler pulley Ceb Hadqjwgc D Sjgsgt - Pneumatic belt tensioning Technical specifications: Motor power: 2.2 kW Sanding belt dimensions: 150 x 2280 mm Sanding belt speed: 22 m/s Table size: 750 x 350 mm Space required: 1000 x 800 mm Weight: from 180 kg Extraction diameter: 100 mm

Condition: used, Year of construction: 2007, machine/vehicle number: 99.467.30, Bandanzahl : 1 max. Arbeitsbreite : 1350 mm 1. Band : Kombiaggregat Ausführung 1. Walze : genutete Stahlwalze Schleifschuh 1. Aggregat : 22 mm Einzelglieder Materialdickenmesseinrichtung : Ja Elek./pneu. Bandoszilation : Ja Cgsb Hadswf Styjqget Einlasshöhe : variabel (unterer Tisch verfährt) Tischhub : elektro-motorisch Gewicht ca. : 1600 kg Absaugdurchmesser : 180 mm

Condition: excellent (used), Year of construction: 1994, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 160 mm, grinding belt length: 1,900 mm, SCM Sandya 10 2-Belt Sander Very good condition from a one-man operation Factory overhauled with new carpet 8 years ago Sanding width 1100 mm, sanding height 160 mm Steel roller for calibration Combination unit with rubber roller and shoe for veneer and solid sanding Viewing possible while still in operation. Negotiable price €6,200 plus VAT Cob Haowg Tplodqgjgt

Condition: excellent (used), Year of construction: 2009, operating hours: 512 h, Automatic calibrating and fine sanding machine, Kundig Premium 2-belt wide belt sanding machine with electronic segment sanding pad and lacquer sanding. A video of the machine in operation can be sent on request. Ideal sanding machine for woodworking stores or window construction, also suitable for intermediate lacquer sanding Two-belt machine with calibration unit and sanding pad unit with electronic link pressure beam Edge segments can be switched on and off Segment width of the pressure beam 35 mm Pneumatically adjusting calibration roller grooved rubberized roller with grain compensation Drive motor 11kW, infinitely variable cutting speed 3 - 15 m/s by frequency converter Belt feed infinitely variable from approx. 3 to 15 m/min Belt blow-off device on the 2nd unit, workpiece-controlled Constant table height approx. 900 mm by adjusting the upper part of the machine, can therefore also be integrated into sanding lines Feed belt still very easy to grip and in very good condition Maximum sanding width approx. 650mm Workpiece height approx. 4 to 200mm Sanding belt dimensions 670 x 2000mm Infeed and outfeed table with rollers Hood lock Suction connection 2 x 180mm + 1 x 150mm Terminal control with 50 programmable sanding programs for automatic machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar, belt blow-out nozzle, infeed of the calibration roller Thickness measuring system with adjustable chip removal and Enormatic with automatic thickness adjustment with feed triggering, eliminating the need for constant remeasuring with a calliper. Programs for different sanding tasks can be saved and selected via smartselect. CE mark Operating instructions 2 soft sanding inserts available Cjbotx Ecyj Hadqgjgt Without the connection cable shown Original paint, only a few spots touched up with the illustrated boxes of abrasives Machine has approx. 511 operating hours Dimensions approx. 1680 x 1150 x 2150mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: new, Year of construction: 2024, Holzkraft edge sanding machine Type: KSO 200 F with veneer sanding device Sanding unit can be swivelled up to 45° by means of a lever Machine stand made of welded steel guarantees high torsional stiffness and vibration-free operation. Oscillating sanding belt with separate gear motor for better sanding results Oscillation optionally switchable Cgeb Hadolht H Njqget Sanding soleplate with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table for utilization of the entire sanding belt width Height-adjustable additional table with suction for grinding radii Spring-loaded belt tension automatically compensates for belt length differences. With double suction Extendable roller table extension With rubberized sanding roller Veneer edge sanding device with contact shoe with fine adjustment, relief rollers and stop rulers With grooved infeed ruler for veneer overhangs Quick changeover from veneer edge sanding to solid wood sanding possible Dimensions and weights Length approx. 1900 mm Width/depth approx. 900 mm Height approx. 1350 mm Weight approx. 290 kg Connection dust extraction suction nozzle diameter 140 / 100 mm Drive power oscillation motor 0,25 kW Working table(s) working table length 960 mm working table width 350 mm Working table height adjustment 230 mm Height min. 735 mm Height max. 965 mm Height adjustment longitudinal table 230 mm Cross table length 330 mm Cross table width 330 mm Cross table height min. 720 mm Cross table height max. 900 mm Cross table height adjustment 180 mm Electrical data Power drive motor 3,0 kW Supply voltage 400 V Grinding unit grinding belt length 3000 mm grinding belt width 200 mm Belt speed(s) 20 m/s Grinding surface length 1050 mm grinding surface width 200 mm Oscillation stroke 20 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), CATALOG NUMBER 7646 Technical data: - max. width of the processed element 1100mm - max. thickness of the processed element 150mm - from above: - 2 rubber, sliding, pressure rollers Roller I - grooved rubber roller for calibration Roller II - aggregate + shoe - rubber, sliding roller - brakes - cleaning of grinding belts (blowers) - from below: - 2 sliding, metal, inlet rollers - pulling belt - 2 sliding, metal, outlet rollers - pneumatic belt oscillation - electric table lifting (digital measurement display) - total power 22kW - smooth speed regulation on the inverter - working pressure 6-8bar - diameter of the exhaust port 3x180mm - total dimensions length/width/height 2250x1950x2500mm - weight about 2400kg ADVANTAGES - Italian production - two aggregates - very good condition - unpainted Ceb Hjwglqhsadqgogt - used grinder Net price: PLN 29,900 Net price: EUR 7,040 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)Net price 29,900,-

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Equipment and technical data: - Complete sanding unit can be tilted by motor up to 45 degrees without any table adjustment - Feed system integrated in the machine carrier, conveyor belt 50 mm wide at the bottom, pressure rollers 60 mm diameter at the top, motor 0.55 kW Cgsb Hovbmkmsadqget Speed infinitely variable 3-15 m/min. - Double-sided operation with face and contact sanding side - Sanding belt size 200 x 2000 mm - Belt drive motor 3 kW - Oscillation stroke programmable 10-90 mm - CE-compliant/dust-tested Availability: short term Storage location: Hochheim

Condition: new, Year of construction: 2025, Quick belt tension via lever Upper belt support with graphite coating 250 mm large balanced belt rollers ensure optimum drive. With electrical height adjustment With suction and noise protection devices With noise protection certificate With two speeds Adapts to surfaces due to swivel-mounted grinding shoe Angled surfaces Clockwise and anti-clockwise rotation as standard The quick belt tensioning system allows quick and easy changing of the abrasive belts. delivery is carried out partly assembled Dimensions and weights Length approx. 4540 mm width/depth approx. 1510 mm Height approx. 1510 mm Weight approx. 475 kg Dust extraction connection Suction nozzle diameter 2 x 140 mm Work table(s) Ceb Hadjff Hdbsqgegt Work table height adjustment 620 mm max. working width on table 900 mm Electrical data Power of height adjustment motor 0,37 kW Power of suction motor 0,75 kW Drive motor power 3.3 / 4.5 kW Supply voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Sanding unit grinding belt length 8100 mm Sanding belt width 150 mm Belt speed(s) 9 / 18 m/s grinding shoe length 360 mm grinding shoe width 150 mm Workpiece Height max. 590 mm height max. workpiece longer than work table 180 mm Explanation of height max. workpiece longer than work table Machining of the workpiece with overhang right over the work table possible

Condition: used, Used machine Condition: age-appropriate Cgjb Hadjq Hh Ebeqgjt table size 2600 x 900 mm max. usable sanding length 2500 mm Belt length 7100 mm x 150 mm 1100 mm offset right motor 5,2 kW Shipping dimensions: 4300x1650x1800 mm weight: 620 kg Availability: short term Location: Flörsheim

Condition: new, Year of construction: 2024, Edge sanding machine with overhead feed unit What distinguishes the Uniq-S from the Uniq is the feed system integrated into the machine table with rubberized feed belt and overhead pressure beam. It significantly facilitates the grinding and production of beveled and chamfered edges, as well as the serial grinding of workpieces. Furthermore, it is also an aid when machining exceptionally large or small parts. The feed speed is infinitely variable between 3 and 15 m/min. Cgsb Hadohqb Rcjqgot A soft conveyor belt at the bottom and rubberized rollers on the top pressure beam gently convey the material. A second bottom conveyor belt is available as an option. The top pressure rollers can also be replaced by a rubber belt, which helps especially when grinding extremely small parts. The Uniq-S is recommended as an all-rounder that enables all processing - from solid wood to fine veneer edges in high quality. The infinitely variable feed speed allows optimum adaptation to the material. 1st sanding station: "veneer side 2nd sanding station: "solid wood side 3rd sanding station: "Additional table 4th sanding station: "Semi-circular table Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2022, Exhibition machine Cgob Hadek D Nxpoqgjt Year of construction: 12/2022 Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings Sanding sleeve device with attachable work table The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Oscillation motor power 0.11kW Suction connection Suction nozzle diameter 2 x 100mm Work table(s) Worktable length 950mm Worktable width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° SCOPE OF DELIVERY 1x sanding belt K100 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm 6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm On-board tool Mitre fence Location: Hochheim Availability: Immediately

Condition: good (used), Year of construction: 1995, Maka universal edge sanding machine with oscillating sanding belt Type: KSM 150/2 Oscillation: yes Solid sanding device: yes Funnel sanding device: yes Can be tilted up to: 45 - 0 + 45° degrees Motor power: 2.0 kW Suction nozzle Table size: 1440 x 220 mm Weight: 530 kg Sanding sleeve device CE marking Location: ex stock 54634 Bitburg - immediately available - Cgob Hadqjr Igtrjgst

Condition: new, Year of construction: 2022, New machine Cgeb Hadskwhk Ssqgot Year of manufacture 2022 Scope of delivery: Table widening Rubber rollers with veneer edge grinding device with contact shoe with fine ice setting and stop rulers with grooved infeed ruler for veneer overhangs quick changeover from veneer edge sanding to solid wood sanding possible length (product) approx.: 1900 mm width/depth (product) approx.: 900 mm Height (product) approx.: 1350 mm Weight (net) approx.: 290 kg Power oscillation motor: 0.25 kW Suction nozzle diameter: 140 / 100 mm Height adjustment longitudinal table: 230 mm cross table height min.: 720 mm working table length: 960 mm working table width: 350 mm Working table height adjustment: 230 mm 400: Supply voltage V Phase(s): 3 Ph type of current: AC Mains frequency: 50 Hz grinding belt length: 3000 mm grinding belt width: 200 mm belt rotation speed(s): 20 m/s oscillation stroke: 20 mm grinding surface length: 1050 mm grinding surface width: 200 mm incl. 1 VE abrasive belts K 80 1 VE abrasive belts K 120 Availability: short term Storage location: Hochheim

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Csb Hadqsgf Sw Nogjgt Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: used, Year of construction: 1991, Used machine Cob Hekwhh Toadqgjgt Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Location: Röllbach

Condition: used, Used machine Used long belt sander from Markant table size approx. 2400 x 800 mm Cgobokwhfxe Hadqgot Availability: short term Location: Hochheim Hochheim

Condition: used, Year of construction: 1979, Used machine Year of construction: 1979 Condition: according to age - Space requirement: 4200 x 2600 mm - Belt dimensions: 7800 x 150 mm - Table size: 2900 x 1400 mm - working length: 2800 mm Cgob Hskwhb Uoadqgst - Passage under belt: 340 mm - Offset right: 1100 mm - Drive motor: 7.5 kw - Weight: 1100 kg Availability: short term Location: Röllbach

Condition: used, Year of construction: 1990, Used machine Year of construction 1990 Sanding width 1350 mm Sanding thickness max. 150 mm 2 belt machine 1st unit grooved steel calibrating roller 2nd unit KOMBIAGGREGAT - with rubber sanding drum 65 SH (newly rubberized) - Pneumatic sanding shoe Belt cleaning device (rear only) Insert control for sanding pad (synchronized with feed speed) Brush roller for cleaning Infinitely variable feed speed 4-20 m/min (Vario gearbox) Automatic table positioning (workpiece thickness) Digital display for workpiece thickness Motorized height adjustment of work table Machine is completely overhauled Pictures show machine in not yet overhauled condition Availability: by arrangement Storage location: Hochheim Cobjulp Dye Hadqgegt

Condition: used, Year of construction: 1991, Used machine Year of construction: 1991 Machine completely serviced and checked Working width: 1100 mm Working height: 140 mm Height adjustment: electric Workpiece thickness display: digital Aggregates: 2 1st unit: Combination unit (roller - shoe) with electronic link sanding shoe 2nd unit: Shoe unit, electronic segment shoe with vacuum transport carpet Dedusting brush: yes Cgebortt H Te Hadqgot Motor power: 2 x 15kW Power consumption: 65A Suction connection: 4 x 200mm Sanding belts 1120 x 1900 Weight: 3500kg Availability: short term Storage location: Hochheim

Condition: used, Year of construction: 2000, Used machine Equipment and technical data: DESCRIPTION Sanding unit can be swiveled by hand crank The machine stand made of welded steel guarantees high torsional rigidity and vibration-free operation Oscillating sanding belt with separate gear motor for better sanding results Oscillation can be switched on as required Sanding pad with graphite coating for a longer service life of the sanding belt Height-adjustable sanding table to utilize the entire sanding belt width Additional table for sanding radii with integrated extraction openings The spring-loaded belt tension automatically compensates for belt length differences Ideal for veneer sanding with adjustable stops Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Length (product) approx. 1700mm Width/depth (product) approx. 1000mm Height (product) approx. 1150mm Weight (net) approx. 300kg Drive power Power oscillation motor 0,11kW Work table(s) Cjb Hadqov E S Acegsgt Worktable length 950mm Work table width 450mm Work table height adjustment 110mm Electrical data Supply voltage 400V Mains frequency 50Hz Sanding unit Sanding belt length 2640mm Sanding belt width 150mm Belt speed(s) 14m/s Oscillation stroke 15mm Sanding surface length 800mm Sanding surface width 150mm Swivel sanding unit 0 45° with chassis Availability: short term Storage location: Flörsheim

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 completely checked + serviced including new feed belt Equipment and technical data: Incl. combination unit with contact roller and sanding shoe with height-adjustable contact roller for calibration with air cushion pressure shoe controlled by the workpiece 4-way adjustable grain compensation with pneumatic belt tensioning device with a rotating cleaning brush on the outlet side of the machine Grinding width: 1350 mm Grinding belt length: 1900 mm Passage height: 150 mm Main motor: 15 kW Feed speed continuously adjustable 2.5 - 12.5 m/min. with roller table at the inlet with digital display device for the electrically driven workpiece thickness adjustment Extraction nozzle 2 x 200 mm Space requirement approx. 2300 x 2000 x 2300 mm Weight approx.: 2300 kg Pictures show the machine in a condition that has not yet been overhauled! Location: Flörsheim Availability: approx. 6-8 weeks after placing the order Ceb Het H Tuljadqgsgt

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: The Master gets to the heart of sanding. It contains the essence of our 75 years of experience in the field of sanding technology. This means that it combines all the features that are essential for the fast, reliable production of perfect surfaces right out of the box. No more, no less. The Kündig Master core model is equipped with a calibrating roller and a sanding pad unit and has a proven design that guarantees decades of high sanding precision across a generous working width of 1350 mm. A control unit is also on board, which guides you quickly and easily to your goal. The sanding units Proven combination The sanding units are based on the proven combination of calibrating roller and sanding pad. For safe workpiece guidance, there is a parallel spring-mounted steel pressure roller at the machine infeed and rubber pressure rollers between the sanding units. Calibration unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, if necessary also with high chip removal. The level of the contact roller is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): With the E-Plus version, the fine sanding unit has a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touch screen to influence the sanding around the edges of the workpiece even more precisely. Changing the graphite backing is also quick and easy here. The features - in a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It has the same solid construction that makes all our machines an investment with foresight and should continue to deliver precise sanding results for many years to come. Top section adjustment: We have been equipping our machines exclusively with top section adjustment for a good three decades. Why? Compared to table adjustment, it is more complex to construct, but it is also better in many respects. The machine can be loaded with heavier workpiece weights, it retains its precision more reliably and you have the advantages of a constant working height. Workpiece dimensions: The adjustment of the upper part, i.e. the passage opening, is motorized and can be finely adjusted via touch screen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master has a generous, tried and tested standard dimension. Eco* energy-saving mode: The Kündig Master features our specially developed Eco* energy-saving mode. The software regulates the power consumption depending on the load. During work breaks, the machine automatically switches to standby mode. It is then immediately ready for use again. This achieves significant savings without compromising performance. Operation - quick and easy On the clearly laid out touch sc Cob Hadqet Na Anjgegt

Condition: new, Year of construction: 2024, New machine Year of construction: 2023 Equipment and technical data: Robust, space-saving 2-belt sanding machine for demanding pre- and finish sanding Cgeb Houhiq Djadqgjt Constant working height thanks to top section adjustment Working width 1350 mm Top sanding, with 2 sanding units 1st unit with grooved rubber contact roller of proven hardness Pneumatic (program-controlled) adjustable contact roller, contact roller level infinitely height-adjustable according to a sanding grain scale 2nd unit with electronically controlled, segmented sanding pad, segment width 35 mm and with quickly replaceable glide coating Parallel spring-loaded, ground steel pressure roller at the infeed Rubberized pressure rollers between the sanding units and at the outlet Motor 15 kW (20 HP), 400 V./50 Hz with soft start for low power consumption at the start Motorized, finely adjustable height adjustment with numerical display Pneumatic belt tensioning, control and oscillation, compressed air consumption approx. 4 l/min. -Optimum safety thanks to automatic immediate stop with disk brake in the event of belt breakage Workpiece feed 0.75 kW (1.0 hp) with fabric-reinforced rubber transport carpet Complete electrical system with contactor control; automatic star-delta start of the main motor, motor protection and ammeter for monitoring chip removal Passage height 200 mm Sanding belt dimensions 1350 x 2000 mm Comfort equipment: Automatic thickness adjustment across the entire working width Workpiece over-thickness protection with immediate feed stop and automatic lift-off of the upper part of the machine Stepless regulation of chip removal Electronic feed control on the control panel, infinitely variable 3 - 15 m/min. PLC control/programming with touch screen (color) and TEACH-IN storage (at the touch of a button according to the sanding result, i.e. no typing required) Pneumatic carpet run control Workpiece support with roller at infeed and outfeed -Enormatic: Fully automated quick adjustment and feed solution eco* energy-saving mode Fault diagnosis Order and operating hours counter Machine in E-Plus version (RE) Incl. outfeed table extension 1350 ch, foldable, without insert plate Incl. freight, unloading on site Incl. commissioning and instruction Location: Hochheim Availability: Approx. week 51 /2023