Used screen printing machine for sale (107)

Condition: new, 2 color screen printing machine for cosmetic as for example cups, tubes, mascara, bottles Nedpfxog Ez Duo Ahzjcl with treatment, uv-dryer, camera control

Condition: used, functionality: fully functional, Thieme screen printing machine Display E600, used, in working condition Ncedpfx Ahsx Hyd Aszsl

Condition: repair required (used), functionality: limited functionality, Screen washing unit for screen printing. For sale due to site closure. Unfortunately, there is no documentation available for the machine. Manufacturer unknown. The unit has not been operated for an extended period and is only partially functional. Various seals need to be replaced, among other things. The machine has not been cleaned. The equipment is located in 56410 Montabaur. Viewing is possible by appointment only. Sold as seen, with no warranty or guarantee. Disassembly and removal are the responsibility of the buyer. Nsdpoxwplhsfx Ahzscl

Condition: new, Year of construction: 2024, Combined Exposure Unit, Model 4, 120x145, 3.5kW Max. screen size: 120x145cm, floor space: approx. 250x 190cm, MH quick-start lamp: 3.5kW, connection: 400V/50cycles, CEE-plug, 32ampere. consisting of steel-tube support with storage board, with 4retractable drawers, with pull-out rails for various sizes of screens, vacuum copying frame with flexible rubber blanket on top, easier lifting of the glass upper frame by gas springs, height-adjustable cross-beam on top with hanging MH exposure lamp model AKTICOP S as well as UV-protection curtain, with light dosing device model AKTITRON S16E, 16programs, equipped with light sensor at the copying frame. Control board at the drying cabinet with vacuum gauge, vacuum reducing valve, operating and control elements. Ncjdjh Tym Ispfx Ahzel

Condition: new, Year of construction: 2024, Manual Screen Washer, Model 4: 150x220 For max. screen size: 150x220cm, 400V, 50Hz. The unit is ex-protected. The control box ist not ex-protected and must be mounted according to the rules at least 5m away from the unit or must be separated from the unit by a fire-proof wall. Made of aluminium, compl. with solvents storage tank, pump, brush, 380/400V. Nsdpeh Tym Sofx Ahzocl

Condition: new, Year of construction: 2024, machine/vehicle number: 05004TRW090130, Drying Oven TRW, Model II For drying racks with max. 50rods, useable size 90x126cm, outer dimensions: approx. 2280mm wide x 1570mm deep x 2280mm high, useable space: approx. 1400x1070x1660mm, fixing and drying temperature: up to max. 180°C, connection: 400V, 50Hz, 21kW, weight: 900kg, lacquering: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). ATTENTION: Not permitted for solvents! Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easily be adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks and flock glues up to 180°C. - Various drying racks for different applications available. - Special varnishing upon request. ATTENTION: Not permitted for solvents! Not permitted for foods! Ncjdpfx Ahjh Tyrwszol

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Ncodpfed I T Exex Ahzel For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: new, Year of construction: 2024, For max. screen size: 120x145cm, connection: 400V, 50Hz, 6kW Ncodpfx Ahjh Tymrjzol Sturdy drying cabinet in full steel construction, with 5 drawers smoothly moving on ball bearings. Good air circulation, with thermostat and timer, with white plastic-coated plate on top, can be used as deposit place.

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover. Ncodsh Tyw Aepfx Ahzol

Condition: new, Year of construction: 2023, Semi-Autom. Screen Printing Machine TIC SC1000 OptiPass Nodpfx Aehrdn Ijhzocl Curve printing machine, stand model, printing size: 200x700mm or printing ø: 600x700mm (Attention: when ø 600mm no 360° all-round printing possible), max. screen frame size: 930x530x30mm. Machine with base frame and height-adjustable feeding table incl. x/y-adjustment. Height adjustment of the feeding table: approx. 250mm, therefore max. height of the printing object: approx. 600mm. With safety frame all-around the sides of the upper frame, equipped with 2sets of squeegee, motor-controlled lateral frame movement for curve printing and rotation of the printing object, machine control via touch-panel, registering by optical sensor, when printing in multi-colour-mode register accuracy is approx. 1mm, drive components 'Made in Japan', compressed air connection: 6bar, supply voltage: 230V, 50Hz Electro-pneumatic machine, micro-processor control. Curve printing machine with universal reception for cylindrical objects as well as optical fitting system for multi-colour printing, with inflation device, printing movements separately adjustable during set-up operation, squeegee stroke, squeegee speed and floodbar infinitely adjustable Delivery time 16-18 weeks

Condition: as good as new (ex-display), Semi-automatic Universal Screen Printing Machine TIC SCF 550 DHE Flat and rotary printing machine, floor-standing model, printing format 300 x 450 mm or printing diameter 160 x 300 mm, max. screen frame size 730 x 530 x 30 mm. Machine comes with base frame and height-adjustable feed table with XY-adjustment capabilities. Height adjustment of feed table approx. 300 mm, allowing a max. print object height of approx. 450 mm. Upper frame with continuous lateral safety guard, equipped with 2 squeegee sets, requires 6 bar compressed air, connection: 230V, 50Hz. Unused demonstration model. Nedpfxsw N N Iuo Ahzjcl Electro-pneumatically controlled machine with microprocessor control. Flatbed printing with T-slot table plate (option: vacuum table plate with vacuum pump), rotary printing with universal holder for cylindrical items as well as rack-and-pinion drive for multi-color printing, including inflation device. In setup mode, print movement can be adjusted individually. Squeegee stroke, squeegee pressure and flood coater are steplessly adjustable.

Condition: new, Year of construction: 2022, machine/vehicle number: 20b015, Fully Automatic Printing Tower for Crate Printing on 4sides Electro pneumatically controlled fully-automatic screen printing machine for rotary printing, with microprocessor control, equipped with feed, printing and ejector station, pneumatic squeegee pressure adjustable via manometer, pneumatic squeegee switching, with squeegee quick clamping system, squeegee stroke, adjustable squeegee pressure. Printing movements individually adjustable when working in one-shift operation. All four sides of the crate will be printed at the same time in different colours and motivs. 800crates per hour enable a precise reproduction ability and a high productivity. Special hose pumps apply the ink onto the horizontal positioned screen frames. In that way each side of the crate gets an even ink application. Ncjdpfxeihccfo Ahzol The screens can be exchanged within minutes which, in turn, reduces the holding time. The multi-functional system of the printing tower makes a change of both logo and ink possible within short time thus enabling short set-up times. A modern electronic control via display ensures the requested process control and helps analysing any faults. The step-by-step operation mode show the printing status during the automatic production run resp. during the set-up by the operator.

Condition: used, Semi-automatic screen printing machine SIRIMAC 4560E Electromechanical machine with parallel lifting upper frame, print area: 45 x 60 cm, vacuum table plate: 60 x 80 cm, screen size: 75 x 100 cm, screen up-and-down motion via geared brake motor, with cross-travel squeegee system, motorized and adjustable squeegee drive, print and flood speed independently adjustable, adjustable squeegee stroke via limit switch, with pneumatic squeegee reversal, pneumatic squeegee and flood squeegee pressure adjustable via manometer, print and flood squeegees with quick-clamp system, adjustable screen lift, with pre-vacuum function, single-stroke or automatic print mode selectable, pre-squeegee function, multiple print, connection: 400V, 50Hz, 10A, compressed air 6 bar required, used condition. Ncodpfx Asw N N Arjhzsl

Condition: as good as new (ex-display), Year of construction: 2024, Semi-Automatic Universal Screen Printing Machine SFM 650 DHE Flat printing machine with parallel liftin gupper frame, printing size: 400x600mm, with motor squeegee motion and height-adjustable feeding table incl. x/y-adjustment, adjustable slot stone printing bed 650x950mm. Height adjustment of the feeding table: approx. 300mm, max. height of the printing object: approx. 450mm. Machine with base frame and safety bar sideways, required compressed air: 6bar, supply voltage: 230V, 50Hz. Electro-pneumatic machine, micro-processor control. Screen printing machine for flat printing, with slot stone printing bed (option: vacuum printing bed with vacuum pump), printing movements during set-up operation separately adjustable, squeegee stroke, squeegee pressure and floodbar infinitely adjustable. Delivery time 2-3 weeks Nodsc Nf Hujpfx Ahzjcl

Condition: used, Year of construction: 2012, functionality: fully functional, Adelco Jetforce Dryer 150 - Natural gas dryer - Belt width: 150 cm - Oven length: 300 cm - Cooling bridge after the oven - Infeed belt: 200 cm - Outfeed belt: 150 cm Njdpfx Asx Nwinehzecl The dryer is very efficient and reliable. We process output from two automatic MHM presses through it. Can be seen and tested daily in our production facility.

Condition: used, Year of construction: 2003, functionality: fully functional, MHM SP3000 for sale, 14 pallets 10 print heads plus 2 empty stations for flash cure units The machine is equipped with a fully operational GoTo function It is extremely well maintained, all print heads are functional, and it comes with four Calmat MW flash cure units. We use it daily in our production, and it can be tested on site. Nedpfex Nv Szox Ahzscl Three sets of pallets: - Regular - 280mm for children's t-shirts - Sleeve pallets.

Condition: used, Year of construction: 2011, functionality: fully functional, Automatic Screen Printing Machine The INO Print SA2 is a modernly engineered screen printing machine designed for printing on various materials placed on a vacuum table. Easy operation, quick job changeover, and fine adjustment of all printing-relevant parameters are among its many advantages. Advantages and Benefits of the INO Print SA2: • User-friendly operation with minimal setup time • High printing accuracy • Optical registration on previous prints – combination with digital technologies possible • Automatic take-off device boosts productivity by up to 30%, improves print quality, and relieves the operator, who only needs to load the print material • Take-off can be performed from any position on the vacuum table • Suitable for printing on materials such as paper, foils, cardboard, etc. • Ergonomic design minimizes operator effort • Pull-out drawer for easy material loading • Screen remains in a horizontal position, preventing ink from dripping behind the squeegee • Ink can be refilled conveniently from a seated position • Pneumatic squeegee and scraper holding system • Servo drive reduces costly compressed air consumption • Maximum print object height: 400 mm Technical Data: Maximum print format: 700 x 500 mm Maximum screen size: 1100 x 900 mm Material thickness: up to 400 mm (with manual offloading) Axial adjustment: X and Y ±10 mm, Z 100 mm Screen lift during loading: adjustable up to 450 mm Air connection: 6 bar Ncedpjx Nv Nmefx Ahzjl

Condition: used, functionality: fully functional, Dans cette offre, vous achetez un système de perforation d'occasion "GBC SteamPunch Ultra". État : Il s'agit dans cette offre d'un appareil d'occasion qui peut présenter des traces d'utilisation. (petites éraflures ou jaunissement). Le fonctionnement de l'appareil a été testé. Emballage et expédition : Vous pouvez volontiers venir voir l'appareil pendant nos heures de bureau. Veuillez prendre rendez-vous à cet effet ! Un emballage résistant à la mer et une expédition dans le monde entier sont possibles sur demande ! Pour plus d'informations, vous pouvez bien sûr nous contacter personnellement. Nedpforvhyzjx Ahzscl

Condition: good (used), Year of construction: 1993, functionality: fully functional, Thieme 3020H automatic machine Ncsdpfxjx Nphvs Ahzsl

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Sakurai Maestro MF 80 Max. sheet size (mm): 800 x 600 Min. print area (mm): 350 x 270 Ncsdpfx Aox Nn R Nehzol Max. print area (mm): 800 x 585 Material thickness (mm): 0.1 - 3 mm Max. speed (IPH): 1,000 Max. frame size (mm): 1,100 x 1,000 Cleaning and antistatic bar Heating tunnel Cooling tunnel Automatic delivery system

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life Nedpfx Aequ Udwehzocl 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition. Nsdor Izhujpfx Ahzscl

Condition: good (used), Year of construction: 2001, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Multistar G2/C - Machine type: Screen printing machine (complete system) - Year of manufacture: 2001 - Equipment: • SPS feeder unit • SPS dryer, model TS-M2, year 2001 • SPS stacking/declaration unit, model Autostack ASR 61+G2, year 2001 • Steel platform and chequer plate on pallets • Control cabinets Ncjdpsxby S Hjfx Ahzol - Fields of application: industrial screen printing, packaging, labels, special print jobs

Condition: good (used), Year of construction: 1997, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: screen printing machine - Year of manufacture: 1997 - Equipment: Njdsxby Smspfx Ahzecl • Mabeg feeder, model MS • SPS dryer, type UV Top 1200, year 1993 • SPS Rehmus stacking unit, type Autostack S-02, year 1993 • Steel platform and tread plate on pallets • Control cabinet • Screen printing frames - Area of application: industrial screen printing, packaging, labels, special applications

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, SAKURAI MAESTRO MS-102AII. (2005) Maximum sheet size: 1050 x 750 mm Minimum sheet size: 420 x 297 mm. Maximum printing size: 1050 x 730 mm Sheet thickness: 0.075-0.8 mm Maximum feeder height: 675 mm. Maximum feeder capacity: 600 kg Speed (feeder): 400 - 3,000 sheets per hour. Screen frame outer dimensions: 1300 x 1170 mm Nodpew N N Hdsfx Ahzscl Length: 3,816 mm Width: 3,080 mm Height: 1,199 mm