Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 89104, overall weight: 130 kg, Needles: 18 Embroidery speed: max. 1,200 stitches/min Maximum embroidery area: 310 x 460 mm 18-needle universal bridge embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, fully equipped for immediate operation: Control: T8-2 operating unit Thread trimmer: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps) Depending on frame type and cap shape Electrical data: single-phase AC 230 V, 50 Hz Scope of delivery: - Software-based electronic T8 control - Thread trimming device - Light barrier - Crosshair laser - 1 x free-arm frame holder - 1 x border frame 460 x 310 mm - 1 x cap frame drive - 2 x cap frames 360 mm - 1 x clamping aid for cap frame Bwodpoyu St Defx Al Isl

Condition: used, Year of construction: 2022, functionality: fully functional, overall weight: 193 kg, SEFA Duplex Pro V3 – Pneumatic Double Platen Heat Press – 2022 Pneumatic double platen / double workstation heat press SEFA Duplex Pro V3, Bsdpfxeyvh Rcs Al Iowl manufactured in 2022, in excellent condition. Machine tested and cleaned, ready for immediate use. - Delivery no included Ideal for any professional textile marking workshop requiring high throughput and reliable performance. TECHNICAL SPECIFICATIONS - Brand: SEFA - Model: Duplex Pro V3 - Year: 2022 - Type: Pneumatic double platen heat press with lateral swing - Platen size: 40 × 50 cm (16 × 20 in) - Maximum pressure: 625 g/cm² - Maximum temperature: 220 °C - Power: 2,200 W - Power supply: 240 V single-phase - Maximum substrate thickness: 45 mm - Weight: 170 kg - Dimensions: 713 × 891 × 1,079 mm - 3 pressing modes: single platen / semi-automatic / full automatic - Independent pressing time per platen - 10 storable time/temperature programmes - Foot pedal control included as standard - Automatic head translation - ECO mode, standby mode, dual piece counter - Designed and manufactured in France APPLICATIONS Textile sublimation and rigid substrates, heat-seal flex and flock, screen-print transfer, laser transfer, DTF on garments and accessories, DTG pre-treatment drying. CONDITION Tested, cleaned, excellent overall condition. Available immediately. Sold by Manutech-Print, professional reseller of textile printing equipment. Contact: manutech-print.com

Condition: good (used), Roaches 3 bath laboratory dyeing machine Roaches 3 bath laboratory dyeing machine 400 V 6600 W 10 A HxWxD= 920 x 1760 x 450 mm Financing through our bank is also possible. Bedpfxsuzhqrj Al Ijwl komplett-konzept.leasingo.de Further articles in other sizes - new and used - can be found in our store! International shipping costs on request!

Year of construction: 2014, condition: excellent (used), Double finisher 842 Multimatic with control unit, year 08/2014, NP 20110 €. Wardrobe former and trouser topper rotatable on one column finish drain in closed cabin integrated cabin exhaust automatically controlled doors close automatically flexible processing of different wardrobes and sizes Computer control with nine freely programmable memory locations air volume regulation for particularly sensitive garments space-saving and virtually no stress in the work area due to finishing process externally steam-heated or fully electric with built-in electric steam generator Are you looking for an all-rounder for jackets & co? - Multimatic Double Finisher 842 Bsdpegtidhofx Al Iowl With the Multimatic Double Finisher 842, jackets, coats, trousers and similar items can be finished automatically. It consists of a form finisher and a trouser topper. The two units are rotatably mounted on a column. For finishing, the previously loaded element (form finisher or topper) is swivelled into a cabin. The doors close automatically and the finishing process takes place in the closed cabin. Automatic finishing, high performance, energy-saving, low-noise, small footprint. Year of construction: 08/2014 New price: 20.110 €. Unit runs perfectly Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Year of construction: 2005, year of last overhaul: 2011, Textile Fabric Steamer / Ager : Make : Zimmer Type : Thermocure UHD 3 Universal Loop Steamer for the operation with saturated steam 102 - 104 °C with height temperature steam max. 185°C with hot air max. 170°C Yoc : 2005 , Machine like new , used only few years in one shift, after 2011 preserved Bedpfey A S Uxox Al Iewl Technical Data: Max material width : 200 cms Max material content : 240 meters Loop length : max. 2,8 m Cloth qualities : woven or knitted goods – single width Max. mechanic speed : 5 - 50 m/min. Steaming duration : 5-40 minutes Heating medium : saturated steam: min. 3 bar, max. 8 bar Average steam consumption :approx. 500 - 1000 kg/h Heating medium for high temperature operation: Thermooil, 280°C, 12 m³/h, approx. 280 kW Service voltage : 3 x 400 V 50 cy. Control voltage : 230 V 50 cy Electrical drive and air fan capacity: approx. 28 kVA Compressed air : ½” , 6 bar + Thermal-oil heating unit for high temperature steam operation type HEIZA Type : HW - S - 02 / K with Weishaupt burner, fired by gas Preserved in a warehouse, must be moved immediately.

Condition: used, Year of construction: 1986, TEXTILE FABRIC STENTER – MONTFORTS MONTEX 12 G/K For sale: Montforts Montex 12 G/K textile fabric stenter line, well-equipped and suitable for drying, finishing, coating, and fabric straightening applications. Machine details Make: Montforts Model: Montex 12 G/K Year of manufacture: 1986 Major overhaul: 2004, including replacement with economical type burners Refurbished: 2008, then preserved Working width: 220 cm Drying chambers: 6 Heating: Liquid gas and natural gas Fabric conveying system: Horizontal chain, pin and clip Bodpfx Aloy A S Thj Iowl Accessories and additional equipment Küsters foulard Isotex coating unit, model SR Mahlo straightener, model RFMC-74 AN Selvage cutting units 2 cooling cylinders Chemical station with tanks: 1300 L, 1100 L, 2 x 500 L All tanks fitted with mixers Heat recovery system installed above the drying compartments

Condition: excellent (used), Year of construction: 2024, We offer this very good FORTEVER-AEMCO FT-1504HC embroidery machine, year of manufacture 2024. Bjdpfx Aloy Efndo Iewl Manufacturer: FORTEVER-AEMCO Model: FT-1504HC Year of manufacture: 2024 Condition: very good Category ID: 19 Type: embroidery machine If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 1965, Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Kobold 0.37 kW Bwedpfsva Acpjx Al Iel -Operation: with foot pedal -Dimensions: 630/470/H1360 mm -Weight: 93 kg

Condition: good (used), Electronically controlled unwinding unit, thread unwinder, yarn winder, thread winder, reel, Bjdpfx Ajxyv Uhjl Iowl -Manufacturer: Texmer, Electronically controlled unwinding unit -Type: EGA 2000 EGA-2000-31001271 -Spool weight: max. 40 kg -Quantity: 12x spooling units available, 1x shaft without attachment Price: per piece -Dimensions: 545/255/200 mm -Weight: 13.8 kg/pc.

Condition: good (used), Sewing machine, industrial sewing machine, industrial sewing machine, motor control for industrial sewing machine, motor control box, motor controller -Manufacturer: Vetron, Motor Control Box for industrial sewing machine Bjdpexnwx Rjfx Al Iswl -Type: YSC-8340 -Voltage: 230V -Number: 13x control available -Price: per piece -Dimensions: 280/130/H310 mm -Weight: 4.4 kg/piece

Condition: good (used), Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg Bjdpfxet E D Dno Al Iswl

Condition: good (used), Year of construction: 1966, Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel Bwjdpfxovcxrlo Al Iol -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Loher 0.37 kW -Operation: with foot pedal -Dimensions: 750/600/H1330 mm -Weight: 101 kg

Condition: good (used), Button machine, toggle press, crimping machine -pneumatically operated Bjdpfxsddk H Te Al Iowl -The machine is also suitable for processing snap fasteners, canvas eyelets... -Tool -Dimensions: 610/470/H1380 mm -Weight: 52 kg

Condition: good (used), Sewing machine, stand-mounted chain stitch sewing machine, industrial sewing machine, industrial sewing machine, stand-mounted sewing machine, overlock sewing machine on a mobile stand, fabric feed via sliding wheel Bjdpfx Aljvaz Tmj Ijwl -Manufacturer: Dohle, industrial sewing machine type 751-914 stand-mounted chain stitch sewing machine -Drive: Siemens 0.37 kW -Operation: with foot pedal -Dimensions: 740/620/H1320 mm -Weight: 102 kg

Condition: good (used), Year of construction: 2016, functionality: fully functional, PASSPORT™ Automatic T-Shirt Unloader - automatic unloader for textiles Bedpfxeqvmkds Al Iewl - fully working - not much use

Condition: new, Year of construction: 2026, Single-needle chainstitch - 3-way feed (needle, presser foot, feed dog) Bwodsyzxcmspfx Al Iel - electromagnetic thread trimming - electropneumatic thread tension - electropneumatic backtacking and presser foot lift

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 636, type of input current: three-phase, total width: 1,800 mm, input voltage: 400 V, input current: 10 A, lifting height: 2,000 mm, load capacity: 250 kg, 31 C – Gerber LS-250-LU Automatic Fabric Loading System – Industrial Spreading Line Unit Description For sale is a Gerber automatic fabric loading system (Model 250 LU), designed for seamless integration into industrial fabric spreading and cutting lines. This unit enables efficient, safe, and controlled handling of heavy fabric rolls, significantly improving workflow and reducing manual labor in high-volume production environments. The system has been operated as part of a complete and synchronized production line together with a GERBER SY 101 spreading system (unit 21 C) and a Lectra Vector VT-FA-MH-71 CNC cutting system (unit 29 C). This setup allows a continuous workflow from roll loading to spreading and cutting, minimizing downtime and maximizing throughput. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video in working condition taken 5.3.2026. Includes • Gerber automatic fabric loading unit • Motorized lifting and roller feed system • Adjustable frame structure • Integrated control panel and switches • Heavy-duty steel frame with wheels Technical Details • Manufacturer: Gerber Technology • Model: LS-250-LU (Loading Unit) • Year: 2004 • Serial number: 636 • Type: Automatic fabric roll loading system Bedpfx Ajy Av H Sel Iswl • Lifting capacity: up to 250 kg • Machine weight: approx. 300 kg • Voltage: 3 × 380 V • Frequency: 50 Hz • Current: approx. 10 A System Functionality • Automated lifting and positioning of fabric rolls • Precise alignment with spreading machines • Smooth and controlled feeding into spreading systems • Mobile design allows flexible positioning between lines Production Advantages • Eliminates manual lifting of heavy fabric rolls • Improves operator safety and ergonomics • Reduces downtime during roll changes • Enables continuous, high-efficiency production flow • Ensures consistent material alignment for spreading Integration • Designed for use with Gerber spreading systems (e.g. SY 101) • Fully compatible with automated cutting lines (e.g. Lectra Vector systems) • Suitable for synchronized production environments Condition Used industrial condition Recently serviced on 27.02.2026 Operational prior to factory shutdown Typical signs of industrial use Inspection recommended prior to purchase Sold as-is, where-is, without warranty Typical Applications • Fabric spreading lines • Textile production workflows • Cutting room automation • High-volume garment manufacturing Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional handling recommended due to size and weight

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. Bedpfx Aljy Avqdj Iowl The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 9A5822, type of input current: three-phase, input voltage: 400 V, input current: 60 A, total height: 1,800 mm, cutting width (max.): 1,720 mm, cutting height (max.): 50 mm, compressed air connection: 6 bar, For sale is a Lectra Vectorfashion VT-FA-MH-71 automated CNC textile cutting system, offered as a complete industrial production line. This system is designed for high-volume, high-precision fabric cutting in garment manufacturing. It enables automated multi-layer cutting with consistent accuracy and significantly improves production efficiency compared to manual cutting processes. The machine has been operated as part of a dedicated and independent cutting line together with a GERBER SY 101 spreading system (unit 21 C) and a Gerber automatic fabric loader (unit 31 C). This configuration enables a fully synchronized workflow from roll loading to spreading and cutting, maximizing throughput and minimizing manual intervention. The system includes a long-format vacuum cutting table, gantry-mounted cutting head, and integrated extraction system. A computer-controlled interface ensures precise execution of cutting patterns and production workflows. The unit has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • Lectra Vector CNC cutting system • Gantry-mounted cutting head • Conveyorized cutting surface • Industrial vacuum system (approx. 30 kW class) • Dust extraction system • Computer workstation and control interface Technical Details • Manufacturer: Lectra, France • Model: VT-FA-MH-71 • Serial number: 9A5822 • Year: 2009 • Type: Automated CNC textile cutting system • Control: Computer-controlled (Lectra software environment) • Cutting method: Oscillating knife, multi-layer capable • System: Vacuum hold-down with extraction Electrical & Utility Requirements • Control cabinet: approx. 230 V, single phase • Vacuum system: approx. 400 V, 3-phase, up to 30 kW • Peak current (startup): up to approx. 60 A • Compressed air: 5–7 bar, dry and filtered • Air consumption: required for tool operation and cooling Cutting Performance • Multi-layer cutting capability (approx. 25–70 mm compressed lay height depending on material) • High acceleration and cutting speed for reduced cycle time • Repeatable precision across full table width • Continuous feeding capability for long production runs System Architecture • Gantry-driven X/Y cutting head for high-speed positioning • Vacuum table with bristle block surface for material stabilization • Conveyorized system enabling continuous material feed • Integrated extraction system for dust and fiber removal Production Advantages • Significant material savings through optimized nesting and precise cutting • Reduced labor costs compared to manual cutting processes • High throughput suitable for industrial-scale production Service & Condition Notes • Recently serviced on 27.02.2026 • Video available from operation (05.03.2026) • Machine was operational prior to factory shutdown • Typical wear consistent with industrial use • Software compatibility should be verified if upgrading control workstation Condition Used industrial condition Operational prior to shutdown Sold as-is, where-is, without warranty Typical Applications • Garment production cutting rooms • Workwear and denim production • Technical textile cutting • Upholstery and automotive textiles Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling required due to system size and complexity Bodsy Avg Espfx Al Iswl

Condition: used, functionality: fully functional, machine/vehicle number: 82415, type of input current: three-phase, total width: 1,500 mm, total length: 2,500 mm, input voltage: 400 V, input current: 16 A, cutting height (max.): 100 mm, 114 A – BERGMAN & JOHANSSON 420 Bandknife Fabric Cutting Machine – Industrial Precision Cutting Unit Description For sale is a Bergman & Johansson industrial bandknife fabric cutting machine, model Type 420, manufactured in Sweden. This machine is designed for high-precision cutting of stacked textile materials using a continuous vertical bandknife system. It is a core component in professional garment cutting rooms, especially suited for detailed shaping of components such as collars, sleeves, and smaller pattern pieces. The system has been used as part of a dedicated cutting workflow together with Finn-Convey spreading tables (unit 22 C), enabling efficient transition from fabric spreading to precision cutting. The long-arm C-frame construction allows handling of large fabric stacks, while maintaining excellent control and cutting accuracy. The machine was in production use prior to factory shutdown and has been serviced on 27.02.2026. Technical Details • Manufacturer: Bergman & Johansson i Borås AB, Sweden • Model: Type 420 • Band length: approx. 4200 mm • Serial number: 82415 • Machine type: Industrial bandknife fabric cutting machine Motor Specifications • Manufacturer: Leroy-Somer • Type: LS 80 P • Power: 0.75 kW • Speed: approx. 1410 rpm • Voltage: 380–400 V (3-phase, star connection) • Current: approx. 2.0 A (Y) / 3.45 A (Δ) • Frequency: 50 Hz • Protection class: IP54 Machine Features • Continuous vertical bandknife for precision cutting • Long-arm (C-frame) design for large cutting areas • Integrated cutting table with smooth surface • Adjustable blade guard for safety and accuracy • Built-in sharpening system for continuous blade maintenance • Heavy-duty industrial construction • Mobile base with wheels for flexible positioning Cutting Capabilities • High-precision cutting of multi-layer fabric stacks • Suitable for both straight and complex contour cutting • Ideal for detailed garment components and templates Bwedpoy Au Hqofx Al Iel • Clean and accurate cuts across various textile types System Characteristics • Table-based cutting process, material is guided manually • Optional air table functionality (depending on configuration) to reduce friction • Stable blade tracking and tension system for consistent performance • Designed for continuous industrial operation Condition Used industrial condition Serviced on 27.02.2026 Machine was operational prior to factory shutdown Typical wear consistent with industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Applications • Precision cutting of fabric stacks • Garment component cutting • Denim and workwear production • Textile cutting rooms • Small to mid-scale production setups Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: Custom made, type of input current: three-phase, total width: 1,800 mm, total length: 14,650 mm, input voltage: 400 V, input current: 16 A, cutting width (max.): 1,800 mm, 22 C – Finn-Convey Industrial Spreading Line (14.65 m x 1.8 m) – Complete with Air-Flotation Description For sale is a professional-grade Finn-Convey industrial fabric spreading and cutting table line, offered as a complete production-ready system. This system is designed for efficient fabric spreading and preparation in high-volume cutting room operations. It enables controlled handling of heavy fabric rolls, precise layer alignment, and smooth material flow prior to cutting. The line has been operated as part of a dedicated production setup together with a Bergman cross cutting saw (unit 114 A). This combination allows efficient pre-cutting of fabric rolls into required lengths before spreading, significantly improving workflow efficiency and reducing manual handling. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Key Technical Specifications • Total length: 14.65 meters (modular structure, adjustable configuration) • Table width: 1.80 meters (suitable for wide fabrics) • Technology: Air-flotation table system for low-friction material handling • Drive system: Motorized side drive units ensuring controlled spreading tension System Components • Finn-Convey motorized side drive units • Industrial air-flotation table structure with perforated surface • Integrated blower system with centrifugal fans under tables • Electrical control cabinet for system operation • Fabric roll handling stands and support assemblies • Integrated end cutting unit with circular blade system Cutting Unit Technical Details • AC speed-controlled motor (Taili Motor Co., Ltd., approx. 90–200W range)14650 • Gear reduction unit (e.g. 5GN-series) for high torque output Bwjdpfxsy Au Ale Al Ijl • Circular cutting blade with integrated sharpening mechanism • Adjustable vertical guide rails for cutting height positioning • Designed for efficient cutting of multi-layer fabric stacks Auxiliary Drive Components • Auxiliary induction motor (e.g. 40W class, speed-controlled) for fine positioning and movement control • Gear-driven transmission for stable and continuous operation • External capacitor-based start system (typical for single-phase auxiliary motors) System Architecture • Modular table construction allowing flexible layout adjustments • Air-assisted material movement reducing friction and operator effort • Cradle-type roll handling enabling tension-free fabric feeding • Encoder-based or mechanical length control depending on configuration • Compatible with upstream roll cutting equipment and manual or semi-automatic workflows Production Advantages • High efficiency with long cutting layouts and reduced material waste • Excellent ergonomics, heavy fabric stacks can be moved with minimal force • Accurate layer alignment supported by controlled drive system • Integrated cutting capability improves workflow continuity • Suitable for a wide range of materials including denim, upholstery, and technical textiles Condition Used industrial condition Removed directly from production after factory shutdown Typical signs of use from industrial environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling, loading, and transport Professional dismantling strongly recommended due to system size and electrical installation

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes Bjdsy Alciopfx Al Ijwl • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 75080154.1/TKT 2, type of input current: three-phase, input voltage: 400 V, input current: 40 A, 30 C – FINN-CONVEY V307 Conveyor 3-Level Table System – Modular Cutting Room Conveyor Description For sale is a FINN-CONVEY V307 conveyor 3-level table system designed for textile cutting room operations. This system functions as a modular conveyor-based table solution for material handling and fabric movement within production. It enables efficient workflow between spreading, buffering, inspection, and cutting stages. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 (unit 35 C). This integration significantly reduces manual handling and downtime, especially during fabric roll changes and feeding operations. The video material also shows a GERBER XLS-125-180-L Spreader (unit 32 C), which was used in the same production line. The equipment has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Includes • FINN-CONVEY V307 conveyor table system • Multi-level conveyor structure (3 levels) • Integrated belt transport system • Drive motors and transmission units • Sensor components for positioning and control • Electrical control cabinet Technical Details • Manufacturer: Finn-Convey • Model: V307 • Type: Conveyor table system • Application: Fabric handling and transport in cutting rooms • Configuration: Multi-level modular system • Levels: 3-level buffer structure • Power: Industrial 3-phase system Key Advantages • Full integration with automated cutting systems (Lectra line ready) • Reduced manual labor in fabric feeding and handling • Continuous material flow for optimized cutting efficiency • Modular system adaptable to different production layouts • Industrial-grade mechanical construction for long service life Production Efficiency The 3-level buffer structure allows continuous operation of the cutting machine by maintaining a constant material supply. This reduces idle time and enables • Higher throughput in cutting operations • Efficient batch handling • Improved workflow synchronization across production stages Build Quality Finn-Convey systems are known for their robust mechanical construction, designed for long-term industrial use. With proper maintenance, these systems are built to operate reliably for decades. Condition Used industrial condition Fully functional prior to shutdown Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Bwsdpfsy Akpzox Al Isl Typical Applications • Cutting room conveyor systems • Fabric transport and handling • Workflow optimization in garment production • Textile production lines Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: FC24DE9128, type of input current: three-phase, total width: 2,800 mm, total length: 1,800 mm, input voltage: 400 V, input current: 32 A, working width: 1,800 mm, total height: 1,800 mm, repeat accuracy: 0.1 mm, feed rate Z-axis: 100 m/min, cutting width (max.): 1,800 mm, cutting height (max.): 25 mm, compressed air connection: 6 bar, For sale is a high-end Lectra Vectorfashion automatic CNC fabric cutting system, model VT-FA-Q2-72. This system represents modern industrial cutting technology and has been taken into use at the beginning of 2025. The system has been used in professional garment production and is designed for high-volume, precision cutting with full CAD/CAM integration. It is a complete large-format cutting solution including vacuum table, automated cutting head and computerized control system. The machine is fully operational and has been recorded in production use on 05.03.2026. Originally purchased new for approximately 125,000 EUR. Technical Details • Manufacturer: Lectra • Model: Vectorfashion VT-FA-Q2-72 • Type: Automatic CNC fabric cutting system • Year: 2024/12 • Control: Computerized CNC system (VectorControl environment) • Cutting type: High-speed knife cutter • Vacuum cutting table with hold-down system • Multi-layer cutting capability • Industrial servo motors • Full CAD/CAM compatibility Electrical & Connections • Type of input current: 3-phase (3-Phase + Neutral + Earth) • Input voltage: 400 V (EU standard) Bsdpfjy Akbqex Al Iewl • Input current: approx. 32 A (depending on vacuum turbine configuration) • Compressed air connection: 6 bar (dry, oil-free air required) Dimensions & Working Area • Working width: 1800 mm (72”) • Max cutting width: 1800 mm • Max cutting height: approx. 25 mm (compressed with vacuum) • Total width: approx. 2800 mm (incl. electrical cabinet and access space) • Total length: approx. 4500 – 5500 mm (depending on unloading table configuration) • Total height: approx. 1800 mm Performance & Accuracy • Feed rate (X/Y axis): up to 100 m/min • Repeat accuracy: ±0.1 mm (industrial IX-series standard) Key Features • High-speed automated CNC cutting • Precision multi-layer processing • Advanced vacuum hold-down system • Modular cutting bed design • Fully computer-controlled operation • Integrated safety and emergency stop systems • Industrial-grade construction for continuous production Condition Used production condition Operational and tested in real production Inspection possible prior to dismantling Sold as-is, where-is, without warranty Line Integration The system has been operated as part of a complete cutting line together with • 30 C – Finn-Convoy Spreading / loading system • 32 C – Gerber Conveyor / table system All units are available separately or as a complete production line Applications • Garment factories • Denim production • Workwear and uniform manufacturing • Technical textiles • High-volume automated cutting environments Location Valga, Estonia Dismantling and transport Buyer responsible Professional dismantling recommended due to system size

Condition: reconditioned (used), functionality: fully functional, Fortuna NAF470 Surface Splitting Machine – Leather Splitting Machine Main features: - 470mm working width - Automatic knife positioning - Two material feed speeds - Waste bin Bwedpoyzi T Njfx Al Iol Machine in perfect technical condition.