Condition: used, With this offer, you are purchasing a used manual transfer press ‘Lotus LTS 150 B from 2023’. Item for sale: 1 x Lotus LTS 150 B with the following equipment: Includes DTF gel oven Year of manufacture: 2023 Gjdpfex Eg Upex Adcjbn Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Atom G222 STVL Clicking Press, Bed Area 900 x 430mm, Top Platen Area 370 x 530mm. Serial No. 75161. Country of Origin: Italy Gbsdsy Shg Aspfx Adcen Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: new, Year of construction: 2012, Heating: Electric Dimensions (W x D x H): 2134 x 598 x 1092 mm Roller diameter: Ø 330 mm (13 inches) Ironing width: 1504 mm (59.2 inches) Hourly output: 34 kg/h Evaporation rate: 17 liters/h Roller speed: 1 to 6 m/min Moist air flow rate: 350 m³/h Noise level: 55 dB(A) Thermal leakage rate: 3% Foot threading type: M10 Weight: 447 kg Packaging volume: 2 m³ Electric power: 20.7 kW Voltage: 400 V / 29.1 A / 3ph + N / 50/60 Hz Gjdpjw El Azefx Adcjbn Year of manufacture: 2012

Condition: like new (used), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, machine/vehicle number: BT 1335 LH, For sale: Global BT 1335 LH free-arm sewing automation | approx. 100 operating hours | like new | incl. table & bobbin winder Global BT 1335 LH free-arm sewing automation in excellent, almost new condition. The machine was purchased new at the end of 2023 from official Global dealer Wim Vinken BV and has only been used minimally since then. In total the machine has approximately 100 operating hours. Both technically and visually the machine is in very good condition and has always been used in a clean professional environment. Gbedpfxeyr Nv Ds Adcen Specifications Manufacturer: Global Model: BT 1335 LH free-arm sewing automation Serial number: 2110235 Year of manufacture: 2021 Purchased new: end of 2023 Operating hours: approx. 100 Condition: like new Included Bobbin winder, as shown in the additional images. Original machine table and complete setup included. The machine is available immediately and can be inspected by appointment. Please contact us for more information.

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: 10110300330, Two industrial washing machines from the brand IPSO (HF304C) are being offered. Gbedpfx Adew Hgh Ijcon Details about the machines can be found in the photos. Both machines have been used for approximately 300 hours. The price is for one unit. Shipping and inspection are available upon request.

Condition: not inspected (used), Year of construction: 2010, MERLIN SK 613 Humidification System, approx. 2010 Gbodpfjyn R H Nsx Adcjn ----- Consisting of: - 1 x Pre-filter and water softener - 1 x Water hydraulics (high-pressure pump) - 2 x Humidity sensors - 6 x Humidifier modules RG - 14 x Humidifier modules MD 1 ----- Original price was approx. €24,000 (excluding installation) (Technical specifications according to the manufacturer, without guarantee!)

Condition: repair required (used), Location: 49838 Langen Gbodsuqy Tpepfx Adcon

Year of construction: 1997, condition: excellent (used), Waste-box collector, waste collector, blower, fan, filter system, radial fan, dust extraction blower, fan, extraction, dust blower, extraction, dust blower, extraction system, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan -Dust extraction blower: with filter gases -Monitoring device: for the amount and quality of waste in the waste suction system -for sampling: on teasels or cleaners -Motor power: 2.2 kW -Speed: rpm -Inlet connection: 1x Ø 300 mm, 2x Ø 100 mm -Dimensions: 1200/800/H1700 mm -Weight: 248 kg Gbsdpfx Adey Uxmxecjn

Year of construction: 2000, condition: like new (used), functionality: fully functional, Laroche Airlay carding machine for short fiber layering. It produces layers for needling or thermal bonding for upholstery, underlays, insulation, and automotive applications. In practice, on your production line, the 2,400 mm working width covers bedding, felt, and geotextile formats without prior cutting. The integrated weighing table stabilizes the basis weight continuously, and the installed power of 51 kW maintains the production rate with dense fibers. Detailed product description: The Laroche textile machine for layering non-woven fibers. Designed for layering short and coarse fibers, this Laroche Airlay carding machine forms layers for needling or thermal bonding. It is suitable for upholstery, underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. In reality, a well-maintained used machine provides real production flexibility across several markets without multiplying changeover operations. Gbedpsy Urmlefx Adcon Production characteristics and weight control: The 2,400 mm working width covers standard bedding, insulation, and geotextile formats, with less trimming required at the output. What truly changes in production is the integrated weighing table: it allows for quick correction of basis weight variations and limits waste at startup and during steady-state operation. The installed power of 51 kW supports the line when the material load becomes irregular or denser. The speed of up to 10 m/min is adjusted according to the layer weight and the type of fibers, which allows for a balanced approach between hourly output and layer uniformity. Production versatility and textile recycling: The adjustable layer weight of 500 to 1,500 g/m² covers lightweight underlays, heavier insulation felts, and upholstery items. In practice, on your production line, this range avoids dedicating a machine to each product family and reduces internal transfers. The machine accepts both natural and recycled fibers. On a non-woven line, I prefer this type of carding machine when it is necessary to absorb variations in raw materials while maintaining a usable layer before consolidation. Textile and non-woven sectors covered by this carding machine: This carding machine meets the needs of upholstery and bedding, underlays for footwear and clothing, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. First and foremost, it is important to verify the compatibility between your fiber mix, your target basis weight, and the expected uniformity downstream. The 2,400 mm width and the adjustable layer weight make it a suitable piece of equipment for a workshop seeking versatility without complicating operations. What the technical data sheet does not say is that this type of configuration also simplifies medium-sized production runs when switching from one application to another with minimal downtime.

Condition: ready for operation (used), Year of construction: 2022, Two nearly new and identical Karl Mayer warp knitting machines are available. Gauge: E32, working width: 130 inch (approx. 3300mm), guide bars: 4, ground guide bars: 4, max. machine speed: 2760rpm. The machines are located in the USA, however, export and transport to Europe without customs clearance are included. Documentation available. An on-site inspection is possible. Gedpfx Aezc Rdqjdcsbn

Condition: used, Lot of 500,000 Dürkopp hanging bags/bag sorters from a conveyor and sorting system. Gbodsza U A Espfx Adcsn Manufacturer: Dürkopp Condition: used, fully functional Quantity available: 500,000 pieces Type: mixed, all compatible with Dürkopp rail system To be sold in units of 10,000 Graduated pricing for 100,000/250,000/500,000 units Dimensions: see images Location: Pforzheim

Condition: ready for operation (used), An industrial ironing machine is offered. Ironing table length: approx. 2000mm, heating capacity: 2400W, motor power: 2kW, motor speed: 1400rpm, control: electromechanical. Equipped with steam generator, textile support surface. Overall dimensions X/Y/Z: approx. 2800mm/1200mm/1600mm. Inspection possible by arrangement. Gbsdpozcfihefx Adcen

Year of construction: 1990, condition: ready for operation (used), A fabric inspection machine is offered. Working width: approx. 2000mm, display: digital length counter, inspection table: integrated backlight, control: conventional via control cabinet, function: winding, unwinding and inspecting fabric webs, control: conventional. Equipped with illuminated transmission screen, digital meter counter, control cabinet with push-button control, guide and winding rollers. Weight: approx. 850kg, overall dimensions X/Y/Z: approx. 2800mm/1600mm/1900mm. Inspection possible by arrangement. Gjdpfx Aszcfizjdcobn

Condition: ready for operation (used), High speed model with SPLIT ROLL high low pile patterning device, working width: 5180mm, needle gauge: 1/8 inch, 1632 (2x 816). Equipment: adjustable needle stroke eccentric and needle stroke adjustment lever with counterweights, prepared in side drive frames, easily accessible at working height, pile height adjustment range 5-16mm, table height adjustment (machine bed) with hydraulically controlled table lock via ENCORE PC memory programmable controller, looper stroke and knife stroke eccentrics with counterweights, 2 needle bars with individual needles, 2 looper bars with Cut Loop individual loopers, 2 knife bars with Tuftco knife blocks, 8 knives per block, individually replaceable, reed plates for front and rear needle bar, ENCORE PC memory programmable controller for controlled stitch density and controlled backing tension, main shaft designed as a hollow shaft with integrated pump controlled pressurized oil circulation lubrication or spray lubrication to each needle drive connecting rod bearing and main shaft bearing in the side drive frames, 2 PC memory programmable HYDRASHIFT DRIVES for smooth needle bar shift, 12 shift steps each to the right/left per needle bar, high speed version with linear slide bearings in the needle bar suspension, pneumatic disc brakes on the main shaft, main shaft rotation via ratchet indexing gear, variable main drive (2x15HP) with frequency inverter, Siemens memory programmable controller with fully wired control cabinet, mounted externally on the control cabinet door. An on-site inspection is possible. Gbsdpjzcfhdsfx Adcon

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 2 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): Gsdpsfnlkwjfx Adcobn • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: ready for operation (used), Year of construction: 2000, A complete braiding line with peripheral devices and a total of twelve Krenzler braiding machines is available. 1) 7x Krenzler SKZ 8E/54H braiding machine, years of manufacture: 2002-2004, control: Krenzler SmartCard, number of carriers: 52, max. working speed: 240rpm, weight: approx. 750kg. 2) 5x Krenzler SKZ 8E/62H braiding machine, years of manufacture: 2000-2005, number of carriers: 64, max. working speed: 240rpm, weight: approx. 1000kg. 3) Herzog SP 280E winding machine, year of manufacture: 2018, winding positions: 4, max. spindle speed: 3300rpm, bobbin diameter range: 39mm-120mm, bobbin width range: 1100mm-280mm. Including 76x mandrels and flanges, approx. 2000 bobbins, approx. 700 carriers, 545 production cards, Mirage software, collection books and sample inventory. Documentation available. An on-site inspection is possible. Gedezbl N Eepfx Adcebn

Year of construction: 2021, condition: ready for operation (used), The machine is designed for foam mattresses, the cores to be processed can also be wrapped with wadding fleece or tricot material, mattress dimensions: 100 to 780x100 to 200mm, compressed air connection: 6 to 8bar, connected load: 1.5kW, weight: 850kg, operating hours reading: 10h, with control system and roller conveyor table. An inspection on site is possible. Godpfxjzbb Sio Adcsbn

Year of construction: 1987, condition: used, YARN BOBBIN STEAMER / CONDITIONER FULLY AUTOMATIC VACUUM YARN CONDITIONER FROM A SWISS TEXTILE MILL SUITABLE FOR ALL TYPE OF YARNS -> COTTON, BLENDED AND FILAMENT & TWISTS MAKE : WELKER ( GERMANY) Mc. No. : 1430 Y.O.C. : 1987, was only for 3 years in a mill inn Switzerland, Thereafter cleaned, preserved and stored in warehouse VOLUME : 9200 L Gbjdpfey Spm Djx Adcen MAX. TEMPERATURE : 150˚C WORKING LENGTH : 4000 MM DIA ( WITHOUT INSULATION) : 1600 MM DIA WITH INSULATION : 1720 MM CONSISTING OF : STEAM AND FIXATION ( FOR PRESSURE OF -1 TO +4 BAR) - WITH AN AUTOMATIC HYDRAULIC DOOR - WITH COMPLETE OIL HYDRAULICS - WITH WELKER SECURITY SYSTEM - WITH COMPLETE VACUUMING - FLOORING OF CHROM-NICEL METAL - FULLY AUTOMATIC COMPUTERISED - WITH INSULATION - AUTOMATIC TRANSPORT SYSTEM ‘P’ (PLATFORM) FOR YARN ON EURO-PALLETS AS WELL AS ON WAGONS ( 1000 MM LONG X 860 WIDE X 1000MM HIGH ; 4 CAN FIT IN ) WITH INTENSIVE AIR & STEAM CIRCULATION WITH AUTOMATIC TRANSPORT SYSTEM ‘P’ POSSIBILITY OF PRE-WARMING OF YARN WITH WARM AIR

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS Godpfx Ajy Spl Hedcsbn WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed Gjdoy Splgepfx Adcebn • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Condition: repair required (used), Machine number: 63882 Type / Model: 8LES pressing force: 22 t table: 900 x 450 mm punch width: 350 mm Installation height without / with support plate: mm Stroke: 8 to 150 mm Condition: Disassembled, needs to be assembled, not tested The cylinder holder of the machine was broken. Spare part was made - see also pictures. Price as-is, price after assembly on request. Gsdpfxjgd R Sgj Adcjbn

Condition: used, Year of construction: 2021, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: NRGL614.01025, type of input current: AC, total width: 3,340 mm, input voltage: 400 V, input current: 19 A, SEI NRGL 1612 V300 – 300 W Industrial CO₂ Laser Cutter with Automatic Material Loader – Operational Industrial SEI NRGL 1612 V300 laser cutting system for sale. Manufactured in 2021 and equipped with a 300 W CO₂ laser source and material loading system. The machine is fully operational and available for inspection. Approximately 10,000 operating hours. Key Features: • SEI NRGL 1612 V300 • Year: 2021 • 300 W CO₂ laser • Working area: 1600 × 1200 mm • Automatic material loader included • Approx. 10,000 operating hours • Operational and available for testing • Located in Munich Germany Suitable for industrial processing of acrylic, textiles, technical fabrics, wood, paper, cardboard, and other non-metal materials. Price: €100,000 VB Gbedpfxszcny Aj Adcon Additional photos, videos, technical documentation, and inspection appointments available upon request. Transportation not included, can be discussed defined and agreed.

Year of construction: 2012, condition: ready for operation (used), Continuous fusing press for sale. Working width: 700mm, factory overhauled: April 2012, control: PLC control. Equipped with infeed conveyor, discharge conveyor. Weight: approx. 650kg, overall dimensions X/Y/Z: approx. 3350mm/1250mm/1200mm. Inspection possible by appointment. Gsdpfx Aey Uydredcobn

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: S2501CV, cutting width (max.): 1,600 mm, cutting height (max.): 25 mm, Bullmer CNC Cutter Turbocut S2501CV – reliable and ready for immediate use For sale is a Bullmer CNC cutter, model Turbocut S2501CV, manufactured in 2004, in good and fully functional condition. The machine operates reliably and is ready for immediate use. The following have already been replaced: Knife motor – new Controller – new In addition, two original Baldor replacement controllers are included in the scope of delivery – ideal as a spare and for long-term security. The cutter is ideally suited for professional use and impresses with its proven Bullmer quality. Godpfx Ajy Tl Nwjdcobn Inspection and test run can be arranged at any time.

Condition: ready for operation (used), An industrial cutting system Kuris for textiles, films, or other flat materials is available. 1) Automatic servo cutter Kuris. 2) Spreading machine Kuris Pionier Super PC Electronic. An on-site inspection is possible. The system is dismantled and ready for loading. Gjdpfx Asw I E Arjdcobn