Used Thread rolling machines for sale (68)

Condition: used, TECHNICAL DETAILS Tool mounting - in the slide (L x P X H) : 130 x 30 x 58 [mm] Cgolq Nnhsuhcafegst - in the chaser holder (fixed tool) (L x P X H) : 115 x 30 x 58 [mm] Output data - Nominal output of main motor : 6,0/7,5 [kW] - Power consumption : 13 [kVA] - Connected value : 35 [A] Output per unit - min. parts per minute : 140 - max. parts per minute : 400 Compressed air supply - Operating pressure required : 0,6 Mpa [6 bar] - Air consumption : less than 0,1 [m³/h] Machine - Dimensions (L x W x H) : 2400 x 1380/3100¹ x 1800 [mm] ¹ without/with drive door and control cabinet door (open) - Weight : 2700 [kg] Production data (standard version) - max. nominal diameter : 8 [mm] - max. shaft length : 110 [mm] - non-profiled shaft part : 60 [mm max.] - profiled shaft part : 55 [mm max.] Slide adjustment zone - Width : 2,0 à 13,0 [mm] - Height (in relation to the upper edge of the chaser holder) : -25 à + 60 [mm] EQUIPMENT - with vibratory bowl RNA

Year of construction: 2008, Condition: refurbished (used), Top condition Pee-Wee thread rolling machine from a trade-in. The machine was disassembled and mechanically and electrically overhauled. New SIEMENS SPS and new electric. 30t forming force Colq Nnhjd Nq Tcsgjgt

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover Cgslsh A S Hteq Nnhgot - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: new, Functionality: fully functional, overall weight: 1,900 kg, workpiece diameter (max.): 42 mm, spindle diameter: 54 mm, roll diameter: 180 mm, total length: 15,000 mm, total width: 15,100 mm, This is a new thread rolling machine with 20 t rolling pressure Cjlqjq D Dzpj Nnhgegt

Condition: excellent (used), Year of construction: 1972, Functionality: fully functional, Machine is ready for immediate use! TECHNICAL DETAILS Number of thread rolls: 2 Thread rolling pressure: 24 t Shaft diameter: 69.85 mm Roller mounting length: 200 mm Rollable material: 5 - 75 mm Rollable pitch: 8 mm Cjlotyygcjq Nnhgsgt MACHINE DETAILS Weight: 3000 kg Dimension: 2120 x 900 x 1450 mm

Condition: good (used), 1 x thread rolling machine Thommen G 07 / PR - 07 Technical data: Pressure capacity: 7 tons Diameter: 1.2 - 22 mm Max. width in plunge-cut mode: 55 mm Roll diameter: 65 - 95 mm Celevwdb Usq Nnhgsgt Shaft mount: 28 mm The machine can be viewed under power by appointment.

Condition: used, TECHNICAL DETAILS Celq Njuhb U Uonhgogt Tool mounting - in the slide (L x P X H) : 130 x 30 x 58 [mm] - in the chaser holder (fixed tool) (L x P X H) : 115 x 30 x 58 [mm] Output data - Nominal output of main motor : 6,0/7,5 [kW] - Power consumption : 13 [kVA] - Connected value : 35 [A] Output per unit - min. parts per minute : 140 - max. parts per minute : 400 Compressed air supply - Operating pressure required : 0,6 Mpa [6 bar] - Air consumption : less than 0,1 [m³/h] Machine - Dimensions (L x W x H) : 2400 x 1380/3100¹ x 1800 [mm] ¹ without/with drive door and control cabinet door (open) - Weight : 2700 [kg] Production data (standard version) - max. nominal diameter : 8 [mm] - max. shaft length : 110 [mm] - non-profiled shaft part : 60 [mm max.] - profiled shaft part : 55 [mm max.] Slide adjustment zone - Width : 2,0 à 13,0 [mm] - Height (in relation to the upper edge of the chaser holder) : -25 à + 60 [mm] EQUIPMENT - with vibratory bowl RNA

Condition: good (used), Year of construction: 1988, We are selling a used, hydraulic thread rolling machine. Manual and automatic operation is adjustable. Cgelq Nnhjua Eb Negot Maximum thread diameter: 40 mm. Roller width: 80 mm. Various thread rolls are included. The machine has been in storage for 26 years and was rarely used before. The machine can be inspected by arrangement. The following rolls are included as accessories: M8; M10; M12; M14 x 1.5; M22 x 1.5; M26 x 1.5; M28; M30 x 1.5.

Condition: new, Year of construction: 2024, overall weight: 7,200 kg, workpiece diameter (max.): 62 mm, spindle diameter: 80 mm, roll diameter: 290 mm, power: 22 kW (29.91 HP), a new thread rolling machine 11 KW 62 mm diameter Material Cslqeq Abnye Nnhgjgt Rolls up to 6 mm pitch Roll diameter up to 210 mm weight 3100 kg Dimension: 1700x1900x1700 mm

Condition: used, TECHNICAL DETAILS - Parts per minute : 250 - 600 [parts/min] Cjleuhb U Ieq Nnhgogt - Min./max. diameter : 2.5 - 6 [mm] - Max. thread length : 40 [mm] - Max. rough part length : 80 [mm]

Condition: new, Year of construction: 2019, A good, very inexpensive stable machine, with swivel spindles Roll pressure: 16.5 tonnes Spindles: 54 mm Threaded length: max 110 mm Engine: 5.5 HP Cgjlq Nsd Ngfrenhget Material O: 4 mm-52 mm Rolls O: 120-170 mm Weight: 1800 kg

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - 750 [parts/min] Colqeuhb Uzo Nnhgjgt - Min./max. diameter : 1.6 - 4.5 [mm] - Max. thread length : 30 [mm] - Max. rough part length : 50 [mm] - Machine dimensions (L x W x H) : 1000 x 850 x 1400 [mm] - Machine weight : approx. 500 [kg]

Year of construction: 2020, Condition: new, Very good, very stable machine with Swivel spindles Cgolq Nned Hathjhgjt Shaft O: 80 mm motor 18.5 altn. 22 kw Weight 4600 kg Dimensions: 2400 x 2300 x 1600 mm

Year of construction: 2019, Condition: new, A new, very good thread rolling machine with 15 t roll pressureThis machine can roll within rolls up to 130 mmIn front of the supports rolls up to approx. 45 mm in length and it has swivel spindles for bar roll shafts O : 54 mmPressure : 15 troll width : 130 mmRolls O : 170 mmOn request we install a rewinding device. Cgjlsd S Nd Ueq Nnhget

Condition: new, Year of construction: 2024, Functionality: fully functional, A thread rolling machine for large and special threads, this machine has 120 t rolling pressure, swivel spindles for long to very long threads Cjlqsu Sb Dye Nnhgogt

Condition: used, Year of construction: 2015, a good used thread rolling machine with 20 t rolling pressure Colounlhasq Nnhgogt

Condition: new, Year of construction: 2024, thread length: 500 mm, workpiece diameter (max.): 60 mm, type of input current: three-phase, These material reduction machines reduce solid material to roll diameters of up to 500 mm in length maximum diameter is 60 mm tapering depending on material type 4 - 5 mm reduction. For example M 42 from 42 round should Cgslq Nsucl Arjnhgot Roll diameter then the 42 round material is reduced to approx. 38 mm

Condition: new, Year of construction: 2024, operating hours: 0 h, Functionality: fully functional, thread length: 140 mm, warranty duration: 12 months, This 25 t machine has many functions It can roll up to 5 mm pitch in single pass, it can produce long threads up to 3000 mm in throughfeed ++ On request, we can install a re-rolling device to re-roll defective threads to fit again Weight : 2800 kg Motor : 7,5 KW 380 Volt Cgjlq Nst T Dvtenhgst Dimensions: 1570 x 1740 x 1340

Year of construction: 2023, Condition: new, a very good thread rolling machine rolling pressure 45 t max. roll diameter 100 mm max. roll diameter: 230 mm dimension: 2150 x 1850 x 1550 Cgelspaixkjq Nnhget motor 15 kw

Year of construction: 2023, Condition: new, a small thread rolling machine up to M 12 x 30 especially for small screws or knurled parts, simple and fast Cgelq Njn Tpqbenhgot Usability, automatic

Year of construction: 2023, Condition: new, a very good 20 t machine available with or without an automatic feed Cgslq Nsi Acqqjnhgjt

Year of construction: 2022, Condition: new, Modern new thread rolling machine with or without automatic loading magazine Loading magazines for small, large and long parts are no problem This machine has 15 t rolling pressure, 54 mm spindle diameter Cgjlq Noh Uxuaonhgjt Weight 1700kg

Year of construction: 2020, Condition: as good as new (ex-display), Thread rolling machine with 25 t roll pressure Cslq Nnjfykbljhgjgt Spindle diameter 69.85 mm Roll diameter 235 mm max. Roll length 160 mm Motor 10 HP Weight 3700 kg

Year of construction: 2021, Condition: new, Thread rolling machine with 46 t rolling pressure Good for grooving rolls and continuous rolls Cgeljg H Thpsq Nnhgot

Year of construction: 2019, Condition: new, a very good new thread rolling machine with 20 t rolling pressure, spindle diameter 54 mm 69,85 mm Celed Tahneq Nnhgsgt