Condition: good (used), Year of construction: 1965, Functionality: fully functional, grinding wheel diameter: 350 mm, rotational speed (max.): 32 rpm, thread length: 500 mm, workpiece diameter (max.): 250 mm, TECHNICAL DETAILS Workpiece diameter: 200 / 250 mm Thread length: 500 mm Thread pitch: 6 - 72 mm Grinding diameter: min. 1 mm Center distance: 800 mm Module: max. 8 Helix angle: 40° Relief grinding: 0.015 - 4 mm Spindle and grinding wheel Workpiece spindle speeds: 0.19 - 32 rpm Grinding wheel diameter: 275 - 350 mm MACHINE DETAILS Total power requirement: 11 kW Machine weight: approx. 3.6 t Space required: approx. 3.8 x 2.3 x 1.0 m Dkoliqowcrviscc Iel EQUIPMENT - 2 dressing devices - Various accessories

Condition: excellent (used), Tapping attachment Efem No.1 for internal thread Mounting MK 2 Tapping head Adjustable slip clutch Thread M3 - M10 Mechanical condition very good optically there are traces of storage Dsljtqlq Ejiqcc Iokl

Condition: used, Year of construction: 2007, thread capacity M 16 threading depth 80 mm throat 250 mm table-size 400 x 500 mm spindle turning speed range 280 + 1800 U/min quill stroke 80 mm thread capacity min. M 4 mm dayligth 315 mm spindle taper B 18 thread capacity in Alu: M 22 total power requirement 2,2 kW weight of the machine ca. ca. 220 kg Dksliqjvrrahscc Iel dimensions of the machine ca. 1,5 x 0,9 x 2,25 m Automatic thread cutting machine in table design, tapping with hand feed - semi- automatic - and fully automatic operation (single and continuous stroke), threading with conductive cartridge, tap breakage protection, brake motor, faster return, extended column adjustable (largest distance from table surface to lower edge of quill 780 mm), intervention protection secured by a magnetic switch. The appropriate pulleys must beavailable for the individual speeds (possible from 280 to 1800 rpm in 9 levels). This machine is equipped with 2 pulleys for the speeds 280 + 1800 rpm. Other belt slides, clamping inserts for drill chucks and conductive cartridgesare available from the manufacturer. The thread cutting performance refers to material ST 37. Minimum quantity lubrication make HPM Technologie, year 2007, 24 V. Prepared for weight compensation for multi-spindle drilling heads with flange quills. Machine comes from a workshop for the disabled and was only rarely used for one product. Please notice that the price of this machine new is € 18500,--! Machine dealer with own stock of 1600 m².

Condition: good (used), Year of construction: 1990, Tapping machine, pipe thread cutter Doliqjficzkocc Iskl -for: pipe size max. 2 inches -Speed: rpm -Foot switch with: emergency stop function -Pipe cutter -Interior deburrer -Operating voltage: 220 V -Mechanics for: cutting jaws missing -Dimensions: 1100/700/H1130 mm -Weight: 132 kg

Condition: new, thread dia. M5 - M24 turning speeds 70 - 200 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - with micro spray system for constant cooling & minimal Cooling lubricant consumption - Includes blow-out device to remove chips, ensuring optimal visibility on the borehole - Includes quick-change chuck for using taps for Through and blind holes - Swivel motor unit for thread cutting at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting, thread is Djliqccovixy Ao Iekl guaranteed right angle (90°) - high productivity, significant time savings compared to manual Threading - Quick-change chuck with integrated slip clutch prevents breaking of the tap - Includes large radius swivel arm for easy positioning tap on the workpiece - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals scope of delivery - Operation via touchscreen - Digital drilling depth display - Micro spray system - Blow-out device - Quick change mount - Quick-change chuck according to DIN - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame 900 x 600 mm (Art. No.: Mounts: DIN 376: M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s Djliqou R N Hyscc Iekl - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: excellent (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: MT1212_2025_1, Multitapper 1212 automatic threading machine CoastOne - Made in Finland New machine Working area: 1250x1250mm Thread sizes: M2-M10 Number of spindles: 3 (optional 4) 2x thread cutting; 1x countersink drilling station Dkeliqowhmtgscc Iel Micro lubrication for every spindle / tool station Control: TC15 touchscreen Numerical entry, import of punches - NC files

Condition: excellent (used), Thread plug gauges different sizes M 80 x6 6 H. 476,00 Euro M 80 x 6 7 H. 476,00 Euro M 64 6 H Left 340,00 Euro M 62 6 H Good& scrap 320,00 Euro M 55. x 3 6 H 240,00 Euro M 55 x 1.5 6 H 240.00 Euro Dkoliqoipxynocc Isl M 48 x 2 6 H 240,00 Euro are also sold individually

Condition: used, Year of construction: 1998, thread dia. 72 mm threading length 200 mm bolt thread from 6 - 72 mm bolt thread from 1/16 - 2 3/4 " inch thread 1/4 - 2 3/4 - 1/16 -2 1/2 " cutting head turning speed 35 + 70 U/min tube thread 16-63 mm tube thread 1/16 - 2 1/2 " total power requirement 2000/2300 Watt weight of the machine ca. 227 kg dimensions of the machine ca. 1,2 x 0,6 x 1,2 m The "REMS Unimat 75" thread cutting machine is a semi-automatic high-performance machine for the efficient cutting of bolt and pipe threads. Working principle: stationary material - rotating head, manual, self-centering vice, pole-changing motor, automatic lubrication cooling, drive via robust planetary gear, right + left running, thread cutting head for chaser cutting jaws. According to the previous owner, the chaser cutting jaws can be regrinded. Enclosed is a 2 x 1 m floor tray which is placed under the machine with 2 grids. The year of construction is estimated. The machine was overhauled by Rems in around 2015 and was hardly used after that because the external threads were produced on other machines. Since then Doliqev Irh Recc Iskl the machine has been in storage and has now been sold. Machine dealer with own stock of 1600 m².

Year of construction: 1968, Condition: good (used), 1 used thread whirling machine for lathes make Burgsmüller Dsliqepit Afjcc Iokl type L 2 serial number 68/1724

Condition: new, thread dia. M6 - M36 turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes Djliqccsvixvqj Iskl - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Escofier I300V Gear rolling machine CNC thread rolling and polishing machine Doljvcc Scsiqcc Iekl manufactured by Escofier, type Flex 40 Syncroll, year 2012 Control Siemens, type Sinumerik

Year of construction: 2011, Condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. For Maier swiss lathe Djliqccswa Uglj Iskl - Price of a new one: 16.100,-- € - two driven toolholders straight 2-020-W10-1001 - Angle-adjustable threaded swivel head

Condition: excellent (used), Tap for pipe thread Make May Dkjliqcjfhdwqjc Iol Type : R 3 3/4 inch Total length 185 mm

Condition: new, Year of construction: 2025, Functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Download PDF file for photographs Dkeliqccsv Rb Aps Ijl

Condition: good (used), Quick-action clamping device, quick-action clamp, quick-action vice, drilling device, machine vice, drilling machine vice, clamping sleeve, collet -Thread cutting head: self-opening thread cutting head -Type: CH7-44 -Image: M48 -Collet: Ø 25 mm -Dimensions: 330/210/H135 mm Djliov Uw Ameqcc Ijkl -Weight: 17.4 kg

Condition: new, Year of construction: 2024, metric thread diameter (min.): 3 mm, metric thread diameter (max.): 16 mm, overall weight: 500 kg, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 200 mm, torque: 24 Nm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, power: 0.005 kW (0.01 HP), The CMA 3-axis controlled tapping center is designed for the post-processing of laser-cut sheet metal parts and complete processing of small parts and tubes, for example. The machine offers the following processing options: - Thread cutting - Drilling (standard / with chip breaking / hollow profile cycle) - countersinking - Flow drilling (with optimum feed curve) - reaming - Simple graphical programming - Import of 2D DXF or DWG files - Machine table according to System 28 (similar to Demmeler and Siegmund welding tables, among others) - Radial compensation of the tool by means of patented tool holder (accessory) Dkjlsrbz T Njiqcc Iol - Tool probe for length measurement and as a breakage detector - Intuitive safety system using light barriers Standard version: Automatic tool changer with 10 positions, mounted on the machine portal

Condition: good (used), Year of construction: 2014, machine/vehicle number: 1029 L, Offer 24400 Technical data: - Tapping capacity approx. M 5 - M 24 - Working range (swivel radius) approx. 200 - 1950 mm - Speeds infinitely variable up to 120 380 rpm - Quick-change tool holder size 2 diam.31 - Table with 2 T-slots 720 x 550 mm - Table height 960 mm - 2 fixed arbors / mounting points - 1 mandrel on permanent magnet flexible to be fixed on iron - Space requirement approx. W 1250 x H 1200 x D 1050 mm - Weight approx. 500 kg Dkjlsulwk Ijiqcc Iel

Year of construction: 2011, Condition: used, 32 mm direkt 1:1,25 angle adjustable from - to -20/ +20 Grad weight 17,0 kg dimensions 180 x 120 x 260 mm mm Threaded swivel apparatus with two driven toolholders in well condition. Doliswa Uf Uoqcc Iekl For Maier swiss lathe - Price of a new one: 16.100,-- € - prepared for two driven toolholders straight 2-020-W10-1001 (not included) - Angle-adjustable threaded swivel head

Year of construction: 2014, Condition: excellent (used), Tap Make Emuge HSS - NE 2 Dsliqofhdwpjcc Ijkl M 80 x 3

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 2666, thread length: 3,000 mm, overall weight: 1,200 kg, workpiece diameter (max.): 30 mm, spindle diameter: 40 mm, type of input current: three-phase, roll diameter: 135 mm, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, roll width: 70 mm, Excellent used ORT 10 ton Hydraulic Thread Rolling Machine complete with 5 sets of thread dies Djliqjuafptjcc Ijkl

Condition: good (used), Thread cutting head with chaser jaws, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck -Manufacturer: Efem, thread cutting head thread cutter four-jaw chuck type G3 Dkoliqov T Ufcjcc Iel -Cutting jaws: not included -Bore: Ø 27 mm -Hole: Ø 40 mm -Dimensions: 160/130/H175 mm -Weight: 3.8 kg

Year of construction: 2000, Condition: good (used), Offer 20158 Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch Djliqopvkm Tjcc Ijkl - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: excellent (used), Thread cutting head self-opening Make Akon Type Rubometic Type D cutting capacity M6 - M 20 Deleg Sif Usiqcc Ijkl shank diameter 40 mm

Condition: excellent (used), Thread cutting steel External thread cutting steel holder Make Comet Type FG 1 Dkolehrw Husiqcc Iel Accessories : Wood storage box 1 cutting steel 60 degrees 1 cutting steel 55 degrees 1 grinding jig