Year of construction: 1993, Condition: good (used), This grinding mill from Rapid is in the Plastima Used Machinery machine storage room. The machine is from 1993. - Brand: Colortronic Csbu Uetphf Ao Dlrorb - Model: M200L - Serial number: 72930024 - Feed opening: 200 x 200 mm - Number of rotor knives: 4 knives - Year of construction: 1993

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,657 h, Functionality: fully functional, machine/vehicle number: 2290.04, cutting force: 960 t, total width: 8,800 mm, total length: 17,500 mm, total height: 5,700 mm, overall weight: 300,000 kg, year of last overhaul: 2022, Leimbach HS960 (2004) scrap shear. In very good condition and can go straight to work, had a full box re-line (approx. £250k) 18 months before we shut it down. The machine has been very well maintained. Only selling due to upgrading to bigger machine. Very tidy and capable machine. Cobu U Dlswc Szrjrjrb

Condition: reconditioned (used), Year of construction: 2012, operating hours: 23,371 h, Functionality: fully functional, pressing force: 78 t, bale weight: 600 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK1 Year of construction 2012 Total machine operating hours 23,371 hours, as of May 2024 Pump operating hours, effective 13,331 hours, as of May 2024 Number of bales pressed 222,492 pieces, as of May 2024 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: Cebu Uovwlqqe Dlrsrb The machine is currently in our workshop undergoing a partial overhaul and general maintenance work. After completion of the overhaul work, the press will be tested in operation and is expected to be available for sale from mid/end of May 2025. Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 1995, Condition: good (used), Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, vibrator, sorting system, vibrating system, sifter -Manufacturer: Gebruder Schmidt, sorting and vibrating system type Gravex 1 -Table size: 1210 x 900 mm, Crjbu Ujhbiwfo Dlreb -Sieve table: can be tilted crosswise and lengthways, 2 pieces of sieves on top of each other -Blower: 2 pieces -Individual components: see photos -Dimensions: 1730/1455 / H1400 mm -Weight: 832 kg

Condition: used, Price: On request Komplett mit Förderband und Magnet - Main motor power [kW]: 45.0 - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Crsbu Uowg D A Ne Dlrsb Peter Stroomberg

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, The Chipvac 400 chip vacuum cleaner from the Oil & Chips range combines DU-PUY's decades of experience in mechanical engineering with unique and innovative elements from our continuous research and development work in one machine. This Chipvac 400 chip and residual suction bucket has a large capacity for collecting solids and liquids with the option of adding a metal separation grid. Possibility of 50° tilting by forklift with a simple and effective patented system. The vacuum cleaner can be equipped with two different powerful blowers, 7.5 and 12.5 kW, which enable it to collect large amounts of chips in a very short time. The new design allows the chip vacuum to be moved very easily along with its turbine, either on wheels or with a forklift. Before tipping the bucket, the turbine can be easily detached thanks to its separate holder. The vacuum cleaner is mounted on a sturdy powder-coated steel frame, equipped with non-marking swivel wheels and a parking brake. Cjbu U Dowdl Ibelrerb Data sheet: Chipvac 400 Voltage 400 - 50 3~ V - Hz Power 7.5 - 12.5 kW Max waterlift 4,400 - 4,000 mmH2O Max air flow 1,100 - 700 m³/h Suction inlet 80 mm Primary filter Star Surface - Diameter 30,000 cm² - 560 mm Dimensions 147x105x207h Weight 490 - 555 kg

Condition: used, Year of construction: 2008, Functionality: fully functional, Klanke Baler, Type KBST-110880, Year of Manufacture: 2008 Technical Specifications: Manufacturer: Klanke Type: KBST-110880 Year of Manufacture: 2008 Pressing Force: 80 t Drive Power: 2 x 30 kW Total Connected Load: 75.5 kW Capacity: max. 225 cbm/h Bale Size: 1,050 x 760 mm, Variable Length Bale Weight: 400-500 kg Baling: 4-way horizontal, automatic Transport Dimensions: 8,585 x 2,210 x 2,800 mm (L x W x H) Csbu U Dljwhi Utororb Weight: 17,000 kg Accessories: 8 wire reel holders, bale chute Materials: Paper, cardboard, film, big bags, PET Operating Instructions, Electrical and Electronic Equipment Hydraulic diagrams are available in German. Note: The press is in working order. A floor plate in the press box is cracked and needs to be replaced. We also recommend replacing the chain on the twister, the hydraulic hoses, and the oil filter. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Offers are subject to change without notice, subject to prior sale, and revocable at any time. Inspections are possible by appointment. The sale is ex-works, without warranty or guarantee.

Condition: reconditioned (used), Year of construction: 2016, Functionality: fully functional, type of motor: electric gear motor, power: 250 kW (339.91 HP), Mobile shredding plant LINDNER URRACO 75E Electric drive: 250 kW Including control cabinet and cooling unit. Crobev D Dqceu U Dlrob

Condition: reconditioned (used), Year of construction: 2015, operating hours: 28,748 h, Functionality: fully functional, pressing force: 60 t, bale weight: 570 kg, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale height: 750 mm, bale width: 1,100 mm, overall weight: 20,000 kg, oil tank capacity: 600 l, power: 37 kW (50.31 HP), volume flow: 350 m³/h, Technical data baler: Manufacturer Presona AB, Sweden Type LP 60 VH1 Year of construction 2015 Total operating hours, 28,748 hours, as of November 2024 Effective pump running time 6,239 hours, as of November 2024 Number of pressed bales 110,122 bales, as of November 2024 Press force pre press 25 t Main press force 60 tonnes Specific pressing force 73N/cm² Dimensions of feed chute 1,500 x 1,100 mm Filling volume / pressing cycle 2.7 m³ Theoretical throughput capacity 800 m³/hour Throughput capacity under operating conditions 350 m³/hour Bale dimensions 1,100 x 750 mm Drive power 37 kW Crsbusvn Tg Io U Dlreb Tying 5-fold vertical, fully automatic Throughput capacity with a Bulk weight of 50 kg/cbm 11 to 14 tonnes/hour Bale weights 420 to 570 kg, depending on material Hydraulic oil tank volume 600 litres Baler dimensions assembled with hopper 10,100 x 3,750 x 4,310 mm (l x w x h) Transport dimensions excluding press 10,100 x 2,400 x 3,000 mm (l x w x h) Machine weight press approx. 20 tonnes Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The press is sold without a conveyor belt and without wire stations. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 2014, operating hours: 1,508 h, Manufacturer: Husmann Type: SPB 20 SEN-E Cjbu Uowhixrs Dlrerb Volume: 20m3 Build in: 2014 Operating hours: 1508 Back door: top hinged Lifting system: hook front and back HKI

Condition: ready for operation (used), Year of construction: 2019, SPLITTER TYPE GÜNTHER 2000 Cjbuswhbr Do U Dlrsrb Screen size 0 to approx. 80/120 mm with vibrating-feeder Total weight approx. 15 tons Length 8,5 m, Width 2,55 m, Height 2,65 mm

Condition: like new (used), Year of construction: 2022, Functionality: fully functional, HIGH PERFORMANCE VACUUM CLEANER FOR HEAVY INDUSTRIES IN ATEX ZONE 22 High performance hopper-mounted industrial vacuum cleaner with lobe pump. Its exceptional suction performance makes it ideal for continuous, heavy duty use in working conditions typical of heavy industry where there are large quantities of material to be vacuumed. The filtering system comprises polyester felt filter sleeves with internal tensioning springs, and polyester safety cartridge to protect the pump. An automatic time-controlled system cleans the filters via chamber backwash valves, ensuring maximum performance even in continuous and prolonged use of the machine. Compressed air for actuating the valves is supplied by a compressor installed on board the machine. The lower hopper has a capacity of 1000 liters and can be filled at the bottom via a manually-controlled butterfly valve. Pneumatic actuators and other types of dischargers are available. Large inspection doors allow easy access to the engine compartment, while eyebolts make it easy to handle the unit by forklift. A push-button panel means you can easily operate the vacuum cleaner without having to directly access the electric panel. Raising frame available for Big Bag emptying. Cebu U Dlewdivijrsrb ADVANTAGES: -ATEX Zone 22 certified | 3D (Ex II 3D Ex tc IIIB T135°C -Sturdy vacuum cleaner for intensive use -Powerful lobe pump with electric motor -High performances and long-lasting equipment -High efficiency filtration -Semi-automatic filter cleaning system -Easy to handle -Detachable container with fork lift intakes which make it easy to handle -Discharge system by means of a valve -Low noise level -Great autonomy of the system

Condition: used, Year of construction: 2024, total width: 1,950 mm, total height: 1,410 mm, total length: 1,330 mm, outer dimension length: 1,330 mm, outer dimension width: 1,950 mm, Empty weight: 850 kg Price: On request - Year: 2024 - Documentation available: No - CE mark available: Yes - Serial number: 910-3158 - Transport dimensions: 1330mm x 1950mm x 1410mm (l x w x h) - Transport weight [kg]: 850kg - Transport packages [pcs.]: 1 Csbu U Dlowgki Njrerb Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: good (used), Manufacturer: KUENY Maschinenbau Cobujtw Ui Hs U Dlrsrb - Type: V-Rotor, W: 1200mm - 22 kW, 380 V , 50 Hz - With hydraulic feed - With discharge screw - With control Optionally with matching conveyor belt and a grinder for secondary shredding.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 43,954 h, Functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale height: 1,100 mm, bale width: 1,100 mm, overall weight: 50,800 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002 Operating hours 43,954 hours, stand March Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 112 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors. Crebsu Thgzju U Dlreb

Condition: like new (used), Year of construction: 2024, operating hours: 180 h, Functionality: fully functional, machine/vehicle number: 123, total length: 9,900 mm, total width: 2,450 mm, total height: 4,000 mm, overall weight: 21,000 kg, power: 235.36 kW (320.00 HP), Demo machine Arjes ekomaxx 800 Perfect shredder for green waste, waste, waste wood, plastic etc. Crobu U Djvzribolrsb

Condition: used, Year of construction: 2005, SHREDDER KOMPTECH TERMINATOR 5000 E 200kW electric including control cabinet fully overhauled new couling unit Cjbewhp Adeu U Dlrorb READY FOR DISPATCH

Year of construction: 2023, Condition: like new (used), Functionality: fully functional, The iXtract Standard Reverse Pulse Filter is an air filtration system designed to remove dust and particulate matter from industrial processes. It employs a reverse pulse cleaning mechanism, firing pulses of compressed air down the filter cartridges to dislodge and collect accumulated contaminants, ensuring continuous and efficient operation. (3 PCS. AVAILABLE) MODEL RPF-H-4 - Technical Specifications: Number of Filters 4 Filtration Area 80m²* / 136m² Weight 729kg Width 1200mm Depth 1800mm Height 2750mm Bin Capacity 100L Crjbu U Dswdgzvolrsb (1 PC. AVAILABLE) MODEL RPF-H-6 - Technical Specifications: Number of Filters 6 Filtration Area 120m²* / 204m² Weight 834kg Width 1200mm Depth 1800mm Height 3270mm Bin Capacity 100L

Condition: used, total length: 3,100 mm, total height: 1,550 mm, total width: 1,850 mm, Empty weight: 5.000 kg Price: On request Crebu U Dlswf U Aqjreb - Main motor power [kW]: 30.0 - Hydraulic unit power [kW]: 3.4 - Number of shafts [pcs.]: 1 - Documentation available: No - Transport dimensions: 3100mm x 1850mm x 1550mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg

Year of construction: 2018, Condition: used, lenght, width, depth 14.170 x 2750 x 3200 mm Cebuswhq A Sj U Dlrorb Band ja weight 27.600 kg

Condition: good (used), Year of construction: 2000, operating hours: 32,169 h, Functionality: fully functional, pressing force: 60 t, bale weight: 750 kg, filling opening width: 1,100 mm, filling opening length: 1,320 mm, bale height: 720 mm, bale width: 1,100 mm, overall weight: 22,000 kg, oil tank capacity: 900 l, For sale is a complete baling system consisting of conveyor technology with personnel protection system, baling press, bale chute and wire stations. Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 60A Year of construction 2000 Hours of operation 32,169 hours, stand November 2024 Press power main press 60 tons Press power of pre-press max. 25 tons Feed channel 1,320 x 1,100 mm Theoretic cycle time 18 sec. Bale size 1,100 x 720 mm, lenght variable Driving motor 45 kW Connected load 60 kW Tying system 5-fold vertical Throughput rate at a bulk weight of 30 kg/cbm approx. 5,5 tons/hour bulk weight of 50 kg/cbm approx. 10 tons/hour bulk weight of 100 kg/cbm approx. 16 tons/hour Crebjviwdmsu U Dlrob Bale weight 400 up to 750 kg, depends on material SPS controller Telemecanique TSX Micro Machine weight baler approx. 24 tons Scope of delivery: 1 piece chain belt conveyor with personnel protection system 1 Bollegraaf HBC 60A baler with whirling unit 1 maintenance platform with access ladder 1 bale chute 2 wire stations with deflection rollers for 10 wire reel stands (without wire) Comments: The machine is currently in our workshop for overhaul. We assume that the press will be completely overhauled in approx. 4 weeks and can then be tested. The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2006, power: 320 kW (435.08 HP), Stationary shredder LINDNER JUPITER 3200 Crobu U Dlswg Ev Dorob Electric drive: 2x 160 kW Powerbelts new. Incl. hydraulic aggregate, electric control cabinet.

Condition: refurbished (used), operating hours: 8,000 h, FULLY OVERHAULED-----READY TO WORK ONLY 6500 HOURS HAMMEL 750 E - Power 2 x 110 kW electric - with long discharge conveyor The following work has been done: - 2 pieces hydraulic motors were overhauled - 2 pieces hydraulic pumps were overhauled - new cooler fan installed - neu rubber belt for the conveyor installed - new drive drum for the conveyor installed - Service done with oil change Cjbu U Dlowhpzaorsrb The machine can be seen in working condition on our site at D-59329 Wadersloh.

Year of construction: 2016, operating hours: 6,500 h, Condition: used, Field of application: Construction Serial number: 13-Fxxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 18130 Specifications: - 2016 model - About 6,500 hours Crobuevg R Sro U Dlrob - 90 kW - Central lubrication - Bunker pump - 3 Factions - Rolls - Ribbons - Services done by the owner himself   - Delivery by agreement Description: Keestrack K6 Hybrid sorting plant for sale to customer. The work is in good condition according to the owner. services and maintenance are carried out continuously by the owner. Delivery by agreement Hours: 6500

Condition: used, total length: 1,650 mm, total height: 3,380 mm, total width: 2,600 mm, Price: On request - Main motor power [kW]: 11.0 - Number of shafts [pcs.]: 1 - Documentation available: No - Transport dimensions: 1650mm x 2600mm x 3380mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Crobu Uewf El Aj Dlrob Delivery and trade-in always possible for everything in the industrial sectors Peter Stroomberg