Condition: good (used), 1 x ICON Engineering Crate Washer 3 phase Dcelnst Nfzio H Hameg Located in Scotland UKFM2-6026

Condition: new, Year of construction: 2025, Briquetting press with PLC and automatic briquette length control Throughput: up to 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material ideally less than 25 mm chip length Dolsv Rpxljn H Hamocg Moisture content 6-12% dry matter Machine suitable for discontinuous operation. For example, briquette for up to 2 hours; 1 hour break, etc. If the machine is to produce continuously for longer than 2 hours, an optional cooling system must be connected.

Year of construction: 2002, Condition: good (used), Functionality: fully functional, Wagensveld machine and steel construction – sorting cabin Broeckx Plastic Recycling B.V. This sorting cabin was put into use in 2002 for the manual sorting of industrial plastic waste. Dceln Hovbh Els Hamog - Closed sorting cabin - Feed belt (slowed) - Sorting belt (4 speeds) - Waste discharge belt - 7 sorting bunkers 32.5 m3 - 1 dump bunker - 12 sorting places

Condition: good (used), Year of construction: 2006, power: 11 kW (14.96 HP),

Condition: good (used), Year of construction: 2020, operating hours: 1,973 h, Equipment: Basic package Inventhor Type 6 - Roller drive via planetary gear 260 kW - VARIO load sensing system - Fuel tank 500 liters - Longitudinal belt: belt length 2,900 mm, belt width 800 mm - Centrally arranged lubrication strips - 24 V electric control - Additional electric pump for operating the following functions when the engine is not running: *Raise/lower/fold rear belt Dcoln H Haevrzbnjmjg *Open/close comb flap *Open/close comb *Raise/lower folding hopper - Radio remote control complete - large GRP side maintenance doors - maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - hydraulically reversible fan wheel - three-sided loading protection - folding funnel - fire extinguisher - maintenance ladder - tool box - acoustic start-up warning - Doppstadt telematics system - without diesel engine - without shredding system - without chassis unit - without rear conveyor - paintwork: RAL 2011 deep orange Additional equipment: Drivetrain 310 kW - EV 2-axle fifth wheel chassis unit Hydraulic drive Additional hydraulic connection 35 - 80 l/min Shredding system size L-C3 600/4-30Z Rear conveyor 4.9 m Overband magnet neodymium Frame for overband magnet

Condition: used, Rollverdichter / Waste Rollers Welger RV 641 Serien-No. 1902.01.607 Abmessungen / Dimensions: L 1490mm x W 900mm x H 1750mm, Gewicht / Weight 540kgs Ballendurchmesser / Bale diameter until 400mm Ballenlänge / Bale length 600mm Ballengewicht / Bale weight up to 30kg Pressdichte / Bale Density 250 x 400kg/33 Leistung-Durchsatz / Throughput up to 300 kg/h Einzugsgeschwindigkeit / Catchment Speed 0,36 m/s Bindemittel Strechfolie / Binding material stretch film 23 my Rollendurchmesser / Roll diameter 250mm Lenk- und Bockrollen zum innerbetrieblichen Verfahren ohne Hilfsmittel / Caster wheels for portability einstellbare Betriebszeit über Zeitrelais / Adjustable operating time Ballen- und Betriebsstundenzähler / Bale and operating hours counter kontinuierliche Füllstandsanzeige und akustische Vollmeldung / Continuous level indicator and acoustic full notification elektrisch betriebene Ballenauswurfklappe / Electronically operated bale ejection schnelles Abbinden und Auswerfen der Ballen (ca. 15 Sekunden pro Ballen) / quick binding and ejection of the bales (about 15 seconds per bale) hoher Durchsatz von bis zu 12 Ballen pro Stunde bei einem Ballengewicht von bis zu 30 Kilo / high throughput of up to 12 bales per hour with a bale weight of up to 30 kilos. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Dcjlnev Rpmce H Hamsg

Condition: reconditioned (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 610.01.022, pressing force: 59 t, bale weight: 350 kg, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,180 mm, total width: 1,059 mm, total height: 2,871 mm, total length: 1,838 mm, type of input current: three-phase, bale height: 800 mm, bale width: 700 mm, input voltage: 400 V, overall weight: 2,300 kg, warranty duration: 6 months, input current: 16 A, transport height: 2,050 mm, power: 4 kW (5.44 HP), year of last overhaul: 2024, transport width: 1,059 mm, transport length: 1,838 mm, type of motor: three-phase motor, nominal current: 16 A, protection type (IP code): IP54, input frequency: 50 Hz, cylinder stroke: 890 mm, Equipment: documentation/manual, Brand: Strautmann Umwelttechnik GmbH The stated price is exclusive of VAT, ex works, and excluding packaging. The press has been cleaned, function-tested, repaired, and equipped with a new control system in accordance with EN16500. All spare parts used are genuine Strautmann parts. Technical Details: Manufacturer: Strautmann Umwelttechnik Type: PP 1207 Bale Size (L x W x H): 1180 x 700 x 800 mm External Dimensions (L x W x H): 1838 x 1059 x 2871 mm Transport Height: 2050 mm Filling Opening: 1190 x 600 mm Baling Pressure: 59 t / 580 kN Throughput: 1 - 2 bales / hour Number of Belt Channels: 4 Baler Weight: 2,300 kg Power Supply: 400 V / 50 Hz Deln H Hasv Rzwmemocg Power Consumption: 4 kW Installation Location: Indoors / Outdoors, Covered Includes Bale Belt Starter Set, 19 mm Serial Number: 610.01.022 Year of Manufacture: 2004

Condition: new, Year of construction: 2025, Production time appr. 4 months Our best-selling briquetting press series + Tried and tested, simple technology for extremely low susceptibility to errors + 25 years of experience, further development and know-how + Several hundred machines in use with satisfied customers + Good price performance ratio Throughput approx. Up to 200 kg per hour * strongly dependent on the material. - in the last test with aluminum granules smaller than 5 mm - approx. 186 kg per hour + the pressed emulsion. - in the last test with aluminum chips smaller than 18 mm - approx. 120 kg per hour + the pressed emulsion. Technical specifications: Motor: 7.5 KW + 0,55 kW Cooler 400 volts / 50 Hz / 3-phase, Front bush: 125 mm, Briquette stroke max .: 100 mm, Briquette stroke opt .: 80 mm, Pump: 80 liters, Storage container approx. 0.5 qbm content (expandable), Diameter: 1200 mm, with agitator discharge, Deln Hjchqxxs Hamscg Hydraulic unit complete with oil tank 220 liters Dimensions approx. 2095 x 1600 x 1310 mm lxwxh, Weight 1370 kg, Automatic on-off switching via level indicator CE compliant. . Requirements for the raw material: - Chip length maximum 20 mm - Installation temperature: temperature-controlled room at at least + 5 ° C - The loading must be free of magnetic metals and mineral impurities such as sand, stones, etc. This can result in damage to the pressing tools and / or increased wear

Condition: good (used), Year of construction: 2008, Garbage compactor, garbage compactor, press container, garbage container, self-compacting container, mobile waste compactor, paper compactor, paper container, baler, paper press, waste compactor, garbage press, vertical baler Deln H Hajud Dvgemscg -Manufacturer: Papenbrock, vertical baler K 800 with bale wagon -Interior: 830x600xH1180 mm -Pressing process: Press piston -Knotting: with strapping band -Transport dimensions: 1090/760/H2380 mm -Weight: 470 kg

Condition: used, Year of construction: 2009, power: 11 kW (14.96 HP),

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal open-type shredder. Manufacturer: Recuperma Type: RECU UZ 20000 Particularly suitable for gentle and rapid composite material disintegration. Disintegration, composite separation, and volume minimization. Operating principle: -Use of flexible impact elements -Shredding through the impact effect of the infeed material -Shredding to different grain sizes Throughput: The hourly output depends on the grain size and specific gravity of the material being processed. Technical specifications (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: Belt drive PTO: Hydraulic unit approx. 1.5 kW Control system: SIEMENS Doljv U Ttben H Hamjcg Frequency converter, SEW Drum diameter: 1900 mm Weight: 25 t HB450 wear plate lining Material feed via hopper Material discharge via sliding door Machine currently defective. Price refers to repaired machine. Price unrepaired: €370,000. Transport not included.

Condition: used, No. 10012 Feed hopper Rema Used Metal plate conveyor / steel plate belt Defective gearbox (Bonfiglioli) Drive power 15 kW Belt width 2000 mm Axis length 10000 mm The system has been out of operation since the end of January 2025 due to gearbox damage Without output conveyor Transport dimensions approx. 15000 x 3000 x 4000 / 5500 mm LWH Sale on behalf of customer, ex location near 78628 Rottweil, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale Any warranty is excluded for used machines, the following applies: “purchased as viewed” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Doln H Hev N E Iysamjcg Terms of delivery: ex location

Condition: used, Year of construction: 2005, AMMANN dewatering screen, complete in good condition, little rust, Motor: 11 kW Maximum flow rate: 50 m³/h Screening area: 3.6 m² / approx. 1250 x 3000 mm Dcoln H Hswcavwsameg Weight: 2550 kg More pictures available. Inspection possible at any time.

Condition: excellent (used), 800 x 600 470 mm Dcelnsqcvh Ns H Hameg 137 pieces

Condition: good (used), Year of construction: 2017, operating hours: 5,750 h, Functionality: fully functional, power: 110 kW (149.56 HP), input voltage: 400 V, filling opening width: 1,020 mm, filling opening length: 1,500 mm, UNTHA RS-100 Shredder Main shaft speed: 17.3 rpm Side shaft speed: 28.0 rpm Chipping disc width: 38 mm Drive power: 2x55 kW, 400 V, 50 Hz Round screen perforation: Ø 25 mm and 80 mm Dcelnsv R Hc Is H Hameg Total weight without base: approx. 12,000 kg Control cabinet with wiring: complete Incl. hopper + pusher and base Clean machine, checked, always maintained, 1 owner!

Condition: used, Year of construction: 2013, power: 5 kW (6.80 HP), We are selling Ludden and Mennekes LM20L press containers from 2013 and 2012. Manufacturer - Ludden and Mennekes Type - LM20L Year of production - 2012, 2013 Dcelswh R Nlen H Hamsg Capacity - 20 m3 Motor power - 5.5 kW We have two! Price upon request!

Year of construction: 2000, Condition: ready for operation (used), Functionality: fully functional, AVAILABLE ONLY DUE TO FACTORY CLOSURE An excellent condition very powerful 75Kw granulator , with a special blade ( HOG) configuration provided to be able to manage large lump materials without in most cases, need for a shredder. Maintained by Owner / engineer to high standard and is considered one of the best granulators in his factory. This offer comes with a large bandsaw to pre-cut any oversize, rare earth magnet on the output , followed by a fines separator , electronic s+s metal detection and removal equipment. Kongskilde fan, cyclones and pipework complete the running system. Spare screens and spare Blades enable immediate start up for buyer, Can currently be seen running as still powered up. Has sound attenuation also included. Dcjln H Hasvz Igpsmjg

Condition: used, Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 4047, overall weight: 3,600 kg, type of input current: three-phase, DGUV certified until: 02/2024, Press station including press control system NG 10 with lift-tilt device and lid opener, material separator, filter system, and fan (Krämer Lufttechnik) including piping 2 x roll-off containers / coupling containers for press station Manufacturer: Ludden + Mennekes Coupling container Year of construction: 1995 Dcsln H Hajv Twf Eemsg Capacity: 32 m³ Dependent weight: 3,600 kg Incl. storage rails In used condition! Dismantled and stored ready for transport. Location: 36341 Lauterbach, delivery possible throughout Germany (for an additional charge) All prices are subject to VAT. The images are for illustrative purposes only. May also be sold in individual parts.

Condition: used, Year of construction: 2020, Functionality: fully functional, EP 120 V Equipment: - Torsion-resistant press box with replaceable floor wear plates - Press piston in heavy design with height-adjustable stable rollers (thus adjustable knife gap) - Pre-installed inclined knife, thus higher cutting forces and a shock-free cutting mechanism - Knife fastening using an innovative screw system and thus easy knife replacement possible - Counter knife system with large cutting clearance angle and optimal cutting geometry - Drive of the needle carriage unit via a robust chain and side guide mounted on rollers (everything adjustable) - Two individually mounted retaining teeth on each press frame side (material expansion in the press shaft is thus avoided) - Extremely stable channel adjustment with oversized adjustment cylinder - Menu-controlled material selection with type and bale length preselection - Control cabinet with manual controls and touch panel with simple operating instructions - Demand switching of the main pumps for energy-efficient Pressing operation - All required safety standards and safety locks Technical data: - Pressing force of 120 tons - Length of the channel baler: approx. 12,700 mm - Height of the channel baler: approx. 3,600/4,300 mm - Weight of the channel baler: 32 t - Filling opening: 1,000 mm x 2,000 mm - Channel cross-section: 750 mm x 1,100 mm - Bale weight: 600 - 900 KG Dceln H Hjv Imldeamjg - Bale format: H=750 mm x W=1,100 mm - Pressing force of the press ram: 120 t - Pressing power: Main pump drive: 2 x 55 kW // Oil tank volume: 2,720 liters - Noise reduction hydraulic unit: Sound pressure level - Automatic 5-fold vertical bale strapping for wire thicknesses from 2.8 mm to 3.8mm - Piston slide principle: needle slot cover - Wear-resistant Hardox base plate in screwed design - Horizontal cylinder bracket: This counteracts misalignments of the press plate due to wear - Articulated bearing on the cylinder piston - Rails of the press plate Hardox screwable and replaceable - Adjustable rollers of the press plate - Path-distance measuring system integrated in the cylinder, optimal position detection of the press ram - Hydraulic oil

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, Used HSM V-Press 1160 Plus vertical press from 2014. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Dcjln H Hajwdttfomjg We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2017, Functionality: unexamined, overall weight: 28,000 kg, number of blades: 84, total length: 5,600 mm, rotor speed: 34 rpm, rotor length: 3,000 mm, power: 264 kW (358.94 HP), rotor flight circle: 1,000 mm, XR Stationary Single-shaft shredder for economical coarse, medium, and fine shredding of various material streams Machine Deln Hov R E D Dj Hamocg Hopper Container with control cabinet Recooler Base frame Rotor blades 110 x 110 x 40 mm

Condition: used, Year of construction: 2011, power: 5 kW (6.80 HP), We sell HUSMANN SPB 16 SET-E presto containers. Manufacturer - HUSMANN Type - SPB 16 SET-E Djlnjwh R Inj H Hamjcg Year of production - 2011 Capacity - 16 m3 Motor power - 5.5 kW PRICE ON REQUEST!

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 450 kg, Used HSM V-Press 860 Max vertical press from 2016. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 780 x 1200 mm Width x height x height of the machine: 1797 x 1247 x 2985 mm Machine weight: 2083 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Doljwdtr Usn H Hamecg Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: used, Year of construction: 2000, power: 5 kW (6.80 HP), We sell or rent LM22L prescontainers. Dcjln H Hewh R Iboamog Manufacturer - Ludden and Mennekes Type - LM22L Year of production - 2000 Capacity - 22 m3 Motor power - 5.5 kW PRICE ON REQUEST!

Condition: good (used), Year of construction: 2013, Functionality: fully functional, pressing force: 42 t, bale weight: 400 kg, HSM VK 4212 Year of production: 2013 Fully automatic press. After a major service, the device was installed with new and fully refurbished most important elements of the press. The machine was also painted. Crush force: 420 kN Unit pressure force: 75 N/cm² Djln Howdtr Ij Hamecg Drive power: 22 kW Voltage/frequency: 400V/50Hz Efficiency at 50 kg/m³: 9.05 t/h Bale width x height x length: 700 x 800 x 600-1200 mm Length x width x total height: 7378 x 2882 x 2030 mm Machine weight: 6.3 t Pressed material: foil, mixed paper, cardboard, die cutting machine waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. opening hours Mon-Fri: 8:00-16:00 Sat: closed