Condition: ready for operation (used), Weima WLK 12 Specifications Motor Power: 100 hp (75 kW) Feed Opening (Infeed): approximately 6.2′ × 5.9′ (1,920 mm × 1,800 mm) Rotor Diameter: ~14.4″ (368 mm) Dodow U Txuspfx Apmokw Rotor Width / Length: ~47.2″ (1,200 mm)

Condition: excellent (used), Year of construction: 2000, operating hours: 10,900 h, functionality: fully functional, overall weight: 16,000 kg, power: 338 kW (459.55 HP), Willibald MZA 3500 / Shredder / Chipper / Crusher • Manufacturer: Willibald • Type: MZA 3500 • Year of manufacture: 2000 • Operating hours: 10,900 hours • Engine: MAN D 2876, 6-cylinder diesel • Power: 338 kW / 460 hp • Inlet opening: 500 mm • Number of axles: 2 tandem axles • Braking system: Air pressure • Number of rotors: 48 • Rotor speed: 1300 rpm • Tow hitch: 40 mm • Fiberizing of organic material for composting up to a diameter of 30 cm Dksdjzdtzmspfx Apmow • Shredding of old wood, waste wood up to a diameter of 30 cm • Total weight: 16,000 kg • German machine • Immediately ready for operation • This offer is non-binding and subject to change. - Subject to prior sale - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Year of construction: 2018, operating hours: 4,163 h, condition: used, functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 31,500 kg, hopper volume: 7,000 l, machine/vehicle number: PID000123KDGI16212, Belt feeder for stockpiles 2-deck heavy-duty screening machine Engine: Cat-C4.4 Dedpfx Apjzbri Esmskw Dual power system Hopper extension Telescoping side conveyors Transport dimensions: 15,380 x 2,860 x 3,390 mm (L x W x H)

Condition: new, length 1900 mm width 810 mm height 860 mm Dkjdofrztfopfx Apmsw internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE Dkedszht H Repfx Apmjw • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: good (used), Year of construction: 2015, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Manufacturer: Dixi Dkjdpfjz A T Hdex Apmsw Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Manufacturer: HERCULES Dkedpfx Apoz R Rklomjw Drum dimensions: approx. Ø 1.8 m x 8 m

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines Dsdpsz Rfpzefx Apmekw We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Condition: used, functionality: unexamined, mileage: 1,890 km, operation weight: 17,000 kg, Year of construction: 2018, operating hours: 1,890 h, Powerscreen Warrior 1200 double-deck screen Year: 2018 1,890 operating hours Double-deck – 3 fractions Screening area: 3680 x 1170 mm Feed hopper: 5 m³ Capacity: up to 100 tonnes per hour (for 0–31–63 mm fractions) Dsdpfx Aj Afniljpmskw Maximum feed material size: 500 mm Engine: Deutz D2011 L04I – 49.4 kW Woven wire mesh on both the top and bottom decks Machine in 100% working order; requires no additional investment – ​​ready for operation! Weight: only 17 tonnes!!!!!

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, For PTO drive (200-450 hp). Equipped with a loading crane and a telescopic tipper body (hopper, 25 m³). Dkedpfx Apezz Ryuemsw

Condition: excellent (used), Year of construction: 1995, 4 units of GfA Aquamatore Manufacturer: GfA Year of manufacture: 1995 Type: AK 4.0/2400/160 Dedpfx Apjz I Syyemjkw

Condition: used, Duct Fan Coral PAP HP20 Kanalventilator Absaugung - Duct Fan Coral PAP HP20 (Absaugung - Extraction) Baujahr / Year 2003 HP 20 REVS 2800 Djdpfx Apjz Hw A Demjkw HZ 50 VOLT 380 / 660 Zum Absaugen von Holzspänen oder Papierresten For vacuuming wood chips or paper residue Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Dkodpfxjz Hxgks Apmjw Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Dkedpfoz Hxg Dex Apmow Drive motor 55 kw

Condition: used, Shredding mill / Shredding mills Dksdpfjz Hxg Rsx Apmow Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 SB Rotor 800 x 1600 mm wide Drive motor 250 kW

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Dkodpfx Aez Hxhhspmew Rotor knives: 5x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Dedoz Hxh Ispfx Apmokw Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW) Djdpsz Hxlyofx Apmskw

Condition: used, Infeed: approx. 300 x 300 mm Rotor width: approx. 280 mm Rotor knives: 3 stator knives: 2 Drive: 7,5 kW Double diagonal cut With roller feeder, electric control unit and sound insulation box Dkedpfxez Hxmdj Apmew

Condition: used, No. 04554 Granulator / cutting mill Alpine RO 40/63 Used Robust granulator / cutting mill for the size reduction of plastics, blown film and cables Motor power 22 kW Rotor width 630 mm Rotor diameter 400 mm Rotor knives: 5 rows with 3 knives each Stator knives: 1 row at the front and 2 rows at the rear, with 3 knives per row Maximum permissible speed of the drive shafts 560 rpm 2 inspection openings Screen hole diameter approx. 12 mm Feed opening approx. 630 x 300 mm LW Feed hopper dimensions approx. 850 x 600 mm LW The hinged screen holder allows easy screen changes and facilitates access for cleaning the machine and replacing the knives. Ideal for recycling applications (blown film, cables, plastics, etc.) and food processing (tea, spices, dried vegetables, etc.). Machine ready to plug in, incl. power cable and 63 A plug Transport dimensions machine approx. 1600 x 1500 x 1800 mm LWH, hopper approx. 1400 x 1200 x 800 mm LWH Weight approx. 2500 kg Dsdpfx Apsz Iav Ajmokw To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 2016, Year of manufacture: 2016 Roll-off press 20 m³ Connection: 380 V, 32 A, CEE 5.5 kW Length: 6,400 mm Dsdpfx Ape Aax Sgomskw In working order.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 21239, pressing force: 38 t, overall weight: 15,000 kg, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,580 kg, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, Equipment: documentation/manual, Avermann AVOS MPC 20 + HKV – 20 m³ | Tilting mechanism 240/660/1100 L | Cable & hook attachment | Discharge flap Djdpsz Ergzofx Apmskw For sale: Avermann AVOS MPC 20 P/A/L/R + HKV compaction container, built in 2016, with a capacity of 20 m³. This robust Avermann compaction container is equipped with an integrated hydraulic lifting and tilting mechanism, making it particularly suitable for locations where roll-on-roll-off containers need to be emptied directly into the container. The tilting mechanism features a hydraulic comb attachment for 240-liter containers and a DIN attachment for 660- and 1,100-liter roll-on-roll-off containers with a flat lid. This makes the machine versatile and suitable for various types of waste containers. In addition, the compaction container is suitable for both cable and hook attachments. At the rear, the machine is equipped with a discharge flap instead of a traditional discharge door, making this version particularly interesting for certain waste streams and applications. Technical specifications: Brand: Avermann Type: AVOS MPC 20 P/A/L/R + HKV Year of construction: 2016 Serial number: 21239 Capacity: 20 m³ Power supply: 3 x 400 V + N + PE, 50 Hz Power: 5.5 kW Fuse rating: 25 A Protection class: IP55 Maximum working pressure: 200 bar Own weight: approx. 5,580 kg Permissible total weight: 15,000 kg Integrated hydraulic lifting and tilting mechanism Hydraulic comb attachment for 240-liter containers DIN attachment for 660- and 1,100-liter roll-on-roll-off containers Cable and hook attachments Equipped with a discharge flap Condition: The machine is currently in used condition and shows visible signs of wear and tear, consistent with its age and use. The compaction container can be delivered in its current state, but if desired, it can also be fully overhauled, sandblasted, and repainted in a color of your choice. Price in current condition: €9,000 Price fully overhauled, sandblasted, and repainted: €17,500 Due to the combination of the 20 m³ capacity, integrated tilting mechanism, and flexible container attachments, this is a very practical machine for, among other applications, industry, logistics, manufacturing companies, recycling, and waste processing. Inspection and testing are possible by appointment. Please feel free to contact us for more information or technical questions. Keywords: Avermann, AVOS MPC20, MPC 20, compaction container, 20m3, waste compactor, container compactor, HKV, lifting tilting mechanism, tilting mechanism, 240 liter, 660 liter, 1100 liter, DIN attachment, comb attachment, hook attachment, cable attachment, discharge flap, waste compaction, recycling.

Year of construction: 1998, condition: good (used), Material separator, material selector, filter system, material separator, metering rotary valve, rotary valve, metering valve, rotary valve, conveying technology -Manufacturer: Höcker Polytechnik, material separators for paper, cardboard, corrugated board ... -Type:PMA-U Dkjdpsx Td Ilsfx Apmsw -Drive: 0.75 kW -Inlet: 590 x 610 mm -Injection air volume: max. 12000 m³/h -Technical data: see photo of the nameplate -Transport dimensions: 2020/1340/H2000 mm -Weight: 878 kg

Year of construction: 2024, condition: new, +++++ We manufacture the original +++++ Machine parts for the pre-shredders VZ 120, VZ 110, VZ 90, VZ 55. Rotor shaft wear parts. Copper cable recycling machines. Made by Koch. Dortmund - Dorstfeld. Germany. Djdpfx Asfgiuzopmekw Our non-binding offer: - Labyrinth rings - Dirt deflectors - Spacing rings - Rotor shafts Terms and conditions on our website. Our goal – to help you.

Condition: used, Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9 Dkjdpfoz Hxhbex Apmew