Condition: used, Year of construction: 2010, operating hours: 9,100 h, Hello, I have for sale a Doppstadt AK 630 high-speed hammer shredder/chipper with a sieve from 2010. Mileage is 9,100 mth. The machine is in very good condition. I invite you to purchase. Duob Hdov Unq Uel Swet

Year of construction: 1995, Condition: not inspected (used), Brand Blackfriar ltd Model: 525BG 42 Year of manufacture: 1995 Serial number: M11346 Capacity (Kw) 75 Dsbjitvbze Hdl Swjut Engine brand ABB Voltage 400 - 690 rpm 600 Dimensions LxWxH (mm) 2700 x 2100 x 2700 Weight (Kg) ca 3000 Number of pieces in stock 1 Capacity (Kg) 1500 / hrs Made in United Kingdom Comments As / is condition

Condition: used, The company sells SPE Renergi Low Temperature Dryer -The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. Dueb Hdl Sorb A R Newst -The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. -Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. -Power supply Data: -Voltage 400 V AC, three phase -Recommended fuses in supply line: maximum 3x630 A -Typical power consumption: 200kW -The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). -Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. -Airflow: max 200 liter/min -Air pressure: min 4,5 bar, recommended 6,0-8,0 bar -Water supply: hot water supply, with a flow of 32 dm3/s. -Water pressure: min 1.5 bar, max 6.0 bar -Operating temperature range: -Incoming air temperature: -20°C to 50°C -Relative humidity: 0% to 60% -Raw material/media: -Relative humidity: 45% to 55% by wieght -Requested relative humidity: 8% to 15% in the dried material -Capacity: -The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load -The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. -SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: -The Machinery Directive 2006/42/EC -LVD 2006/95/EC -EMC 2004/108/EC -The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. -The dryer is already dismantled -All electrical schematics, manual, operating instructions available -Upon request, we can provide a contact person with this type of working dryer for consultation

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8455, overall weight: 44,000 kg, rotor speed: 87 rpm, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) Dujb Hdlougf Dwj Swjt - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP - Rubberized bolted floor plates on tracked chassis

Year of construction: 2024, Condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. Dob Hdl Seua D Aljwjut ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: excellent (used), Year of construction: 2005, Shreder twin-shaft machine ANDRITZ MeWa UC120 Djb Hdl Ssquuryewjut Machine after technical inspection.

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Manufacturer: HSM - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. Dueb Hdswcpvasl Swjt * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Year of construction: 2022, Condition: new, High-performance air filter for compact filters of filter classes E10 to H14 (EN1822) with pre-filter stage for compact filters up to filter stages G4 to F7, optionally with activated carbon filter, depending on the filter combination used, up to 2500 m3/h constantly regulated air output (EC fan) with touch screen control and the option of remote maintenance at approx. 55 db(A) Sound pressure level for the filtration of bacteria, germs, mold spores, pollen, dust, fine dust, asbestos, toxic dust, unpleasant odours, harmful gases and vapors or hydrocarbons depending on the filter insert Dueb Hdl Sjktfgbjwot

Condition: refurbished (used), Functionality: fully functional, type of input current: three-phase, filling opening width: 700 mm, filling opening length: 1,230 mm, Untha RS 50 shredder Power 2 x 22 KW Chamber dimensions 1230x700 New knives 310/2Z and 270/8Z New bearings, seals, oil in the gearbox. Weight approx. 3500 kg. Machine after general service. Untha RS 40 shredder Power 2 x 18.5 KW Electrical cabinet - Siemens Simatic S7 Chamber dimensions 1000x700 Weight approx. 3000 kg. Price on request. Possibility of performing tests. More photos and a video of work on request. Deb Hdorywktjl Swjut

Condition: like new (used), Year of construction: 2023, operating hours: 185 h, Functionality: fully functional, machine/vehicle number: 910, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression - Raised filling area - Flat bottom plate on tracked chassis Djbotwmnnj Hdl Swsut Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Year of construction: 2022, Condition: new, The MDS-1 Electric Motor Recycling Machine designed to accurate copper extraction from stator insert of electric motor with different types of diameter. Djb Hdohix N Asl Swout Description: The machine use steel claws to extract copper from the stator shell during backward movement. Stator fixed on special rollers mounted on lifted platform, a holder located in front of the machine keeps the stator from moving. Steel claws release copper when the operator pulls leaver backward. The machine fitted on solid frame, equipped with two sizes of hydraulically operated claws, holder and lifting platform with rollers. Technical information: • Engine power – 11 kW • Maximum engine diameter – 690 mm • Minimum engine diameter – 150 mm • Two types of clamping jaws • Foot switch • Weight – 1250 kg • Dimensions – 2950 × 1150 × 1250 mm • Control panel with an electrical security system

Condition: refurbished (used), Year of construction: 2007, The shredder is intended for stationary use in recycling plants. The machine can work inside plants, in halls, industrial buildings, in specially prepared facilities under a roof, but it is also adapted to work outside. Input material: The machine is adapted to granulate: • pre-sorted household and industrial waste, • paper and cardboard, • textiles, • foils, plastics and other materials with high calorific value, suitable for the production of alternative fuels, • wood and wood-like waste, • shredded passenger and truck tires and rubber waste, • cables and electrical bundles, • steel and aluminum chips from milling, • oil filters, • electrical and electronic waste, small motors and transformers Manufacturer's catalog data: - specific gravity of the light fraction 2125 kg/m³, - specific gravity of the input fraction 2350 kg/m³, - humidity 8-12% (max. 25%) The UNI-CUT UG 2008 MSL universal granulator is able to process a single, unhardened metal with a maximum cutting surface of 625 mm². This corresponds, among others, to materials: 25 × 25 mm iron bar or 3 mm thick sheet metal with a cutting length of 200 mm. Efficiency: Approx. 1.0 - 18.00 t/h The given values are indicative because they are influenced by many factors: - type and quality of waste and its bulk density, - content of mineral and metal fraction, - granulating sieve and its hole diameter (grain size from 10mm to 150mm is determined by the perforation of the replaceable sieve under the cutting mechanism of the granulator) - method of dosing the material, - proper service and operation of cutting knives Technical data: Technical Specifications: Manufacturer ANDRITZ MeWa GmbH Type/model UNI-CUT UG 2008 MSL Serial numer ……… Year of manufacture 2007 Gross weight 28,900 kg Color to choose from the RAL palette Power supply Rated voltage 400V Electricity type 3/PE, 50Hz Rated power 220 kW (2 x 110 kW) Deb Hslpckgjdl Swout Rated electricity 562 A Dimensions: Granulator height +- 4800 mm height with extended clamp +- 6580 mm width +- 2900mm length +- 5000mm The exact dimensions of the machine are available with technical drawings for those interested.

Condition: like new (used), Year of construction: 2005, operating hours: 6,950 h, overall weight: 29,000 kg, Terex Pegson Trakpactor 428 impact crusher 2005 year 6950 hours Inlet 1067x711 mm Dueb Hdl Setlpmwswot Max feed size: 400 m3 Engine CAT C9 CSS range from 0-20 to 0-100 mm Capacity 80-200 tons per hour depend on material Weight 33,5 tons Blow bars 60% Fitted with overband magnet Machine in very good working condition, ready for work Machine available since 30.05.2024

Year of construction: 2023, Condition: new, High-performance air filter for HEPA filters of filter classes E10 to H14 with pre-filter stage for compact filters up to filter stages G4 to F7, optionally with activated carbon filter, depending on the filter combination used, up to 1750 m3/h of constantly regulated air performance (EC fan technology) with touch screen control and the possibility of remote maintenance at approx. 60 db(A) Sound pressure level for the filtration of bacteria, germs, mold spores, pollen, dust, fine dust, asbestos, toxic dust, odours, harmful gases and vapors or hydrocarbons depending on the filter insert Dujb Hokuyfhodl Swot

Condition: excellent (used), The PAL.VME 16 high-capacity screener was used in the Egger factory to sow sawdust and wood chips. Dusb Howccn Aedl Swjt

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 8241, overall weight: 11,700 kg, rotor speed: 105 rpm, rotor length: 1,525 mm, power: 110 kW (149.56 HP), warranty duration: 12 months, Features: - installed screen: SK60 (can be modified on customer request) - Feed chute - Wear protection carapace armoring - Rotor cooling preparation (connections) - Hydraulic oil cooling up to +45°C - Hydraulic protection fuse - Bus connection to external control system Deb Hdletzll Ss Swsut Application: Pre-shredding of plastics, ideal for feeding plastic recycling plant / sorting plant, hard plastics

Condition: ready for operation (used), Year of construction: 2007, Orwak 3100 (2nd hand machine) Condition: serviced, ready for operating Baler was only used indoors. Number of machines available: 1 Technical data: Pressing force: 3 Ton Motor: 0.75 kW Power supply: 220-230 V (1 phase) Machine size (H x W x D): 1990 x 826 x 693 mm Transport height: 1990 mm Machine weight: 338 kg Bale: Bale size (H x W x D): 600 x 700 x 500 mm Bale weight up to: 60 kg Strapping: 2x PP-straps Dusb Hsh Nglmodl Swet Loading aperture: Loading aperture (H x W): 400 x 700 mm Optional extra: BTS-WG30 Strapping for Waste Baler Bale Trolley Freight cost on request.

Condition: used, Year of construction: 2013, pressing force: 34 t, power: 5 kW (6.80 HP), MAXIPRESS Stationary Compaction System MST-EL 2015 SK FOR SALE OR RENT! Stationary compacting plant under construction for press containers for slip systems for the compaction of paper/cardboard or residual waste combinable with lifting/tipping devices, mobile or fixed suitable for 120, 240, 660, and 1,100 liters - transfer containers according to DIN and special containers Pressing force: 34 t External dimensions: 2,136 x 2,300 x 1,850 mm Filling opening: 1,500 x 1,900 mm Motor: 5.5 kW Duob Hdl Sowc R H Hewjt Weight: 3,400 kg BOX - 30 m3 Year of construction: 2007

Condition: excellent (used), Year of construction: 2018, Baler, Bramidan B20 - second-hand - : Price ex location: 7.750.-€ (net) Manufacturer: Bramidan Type: Vertical raw material balers B20 Year of construction: 2018 Bale weight Cardboard (kg) 200-250 Plastic film (kg) 250-300 Pressing force 20 t Bale size WxDxH (mm) 1200 x 800 x 800 Filling opening WxH (mm) 1200 x 480 Power supply 3x400V 50Hz 16A Motor (kW) 4.0 Cycle time average (s) 36 / 21 Dimensions WxDxH (mm) 1775 x 1030 x 2790 Transport height: 2.58m Weight (kg) 1250 Stroke (mm) 750 Dob Hdjrl I Ivol Swout Number of tie-downs 4 Type of strapping Strap Finished bale light Yes Bale ejection Automatic The classic among raw material balers The B20 is versatile and is used everywhere. The recyclable materials must be "dry & soft". Particularly suitable for raw materials such as cardboard, paper, cardboard packaging (PPK) and film. Stackable bales, up to 900 kg per pallet The bales are stacked 2 or 3 high on one; enormous space saving. Simple bale strapping Automatic bale ejection Short cycle time thanks to high speed Strap rollers mounted on the front allow installation directly on the wall Pallet-sized bales that can be stored outdoors under cover 3xx230x-440 4kW Amps: 25/16 dB 62-64 Condition: good - very good Available: immediately Location: 09116 Chemnitz

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8172, total length: 8,000 mm, total width: 2,550 mm, total height: 3,200 mm, warranty duration: 12 months, power: 250 kW (339.91 HP), Features: - built-in cutting unit SR-8.8 scrap+ASK+NBB SR tines - Side elevation cutting chamber +300mm (1-piece) - Lateral elevation tilting hopper +300mm (1-piece) - Overband magnetic separator Neodymium - HP Duob Hdetwwf Dsl Swst - Dust suppression - Belt speed control

Condition: used, Year of construction: 2001, power: 4 kW (5.44 HP), The Strautmann PP 1207 Baler Potential recyclable materials: Cardboard, film, PET bottles, foam, cans, electronic waste Technical details: Manufacturer: Strautmann Dusb Hdljwc Rv Uj Swet Type: PP 1207 Bale size (LxWxH): 1200 x 700 x 800 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1844 x 1067 x 2868 mm Transport height: 1970 mm Filling opening: 1145 x 430 mm Pressure: 580 kN Throughput: 1 - 2 bales / hour Number of belt channels: 4 Baler weight: 2200 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: indoors / outdoors Covered Noise level: under 80 dB(A) Year of construction: 2001

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8348, warranty duration: 12 months, power: 257 kW (349.42 HP), Features: - built-in cutting unit HW-6.7 scrap + ASK scrap + NBB smooth - Overband magnetic separator - belt speed control - Dust suppression Dob Hdl Sjtwwa Uewout Area of application: Light scrap

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8330, total length: 7,000 mm, total width: 2,530 mm, total height: 2,900 mm, overall weight: 18,500 kg, warranty duration: 24 months, rotational speed (max.): 28 rpm, rotational speed (min.): 10 rpm, power: 257 kW (349.42 HP), - URRACO 75D-3 - Cutting unit HW-6.7 + scraper comb + smooth secondary breaker bar - Overbelt magnetic separator - Dust suppression Dsbougf U Ne Hdl Swjut - Wheel axle and drawbar - Belt speed control

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8461, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-1 with 315 kW -Cutting system 172RP5 - Screen SK100 (can be changed on customer request) - Feed chute - Dust suppression Deb Hdeugf H Eol Sweut - Electrical central lubrication - Hydraulic safety guard - Overbelt magnetic separator Neodymium - HP - Flat bottom plate on tracked chassis

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Dsb Hovt Suhjdl Swsut