Condition: good (used), Year of construction: 2006, VERY POWERFUL GRANULATOR WITH HIGH CAPACITY Technical data: Rotor Length 4 000 mm Rotor Diameter 1 200 mm Power 500 kW Nsdpsx E T A Aofx Ah Uelk Weight approx. 35 tons The machine is dismantled on stock.

Condition: used, Year of construction: 2006, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crusher plant, twin-shaft shredder, slow-speed, drive: electro-hydraulic, 200 kW electric motor, hydraulic unit with control cabinet and operator panel. The plant has been out of operation for approx. 0.5 years. Two brand new rotor shaft bearings and labyrinth seals were installed on the drive side two years ago. Electrical and hydraulic systems are untested: must be connected. Nlsdjx Nkdrepfx Ah Uek

Year of construction: 2006, operating hours: 5,100 h, condition: excellent (used), functionality: fully functional, Used Powerscreen Warrior 1400 Tracked Screening Plant Year 2006 CAT Engine 5100 Hrs Fingers Top Deck & 15mm Slotted Mesh BTM Deck Top Deck Mesh Cassette Available If Required Various New Hydraulic Hoses Just Fitted Various New Conveyor Rollers Feeder Belt & Oversize Conveyor Belt Replaced New Remote Control Doglead Unit Good, Straight Machine. Ready To Go To Work Nsdexyq A Hopfx Ah Uelk

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Nlsdpfxox Dnb Us Ah Uek Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year of manufacture 2021 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2021 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cartons The baler is in very good condition. The operating manual is included. Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the accuracy of the information given or for any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Nedsx E Td Hspfx Ah Uelk Inspection is possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: used, Year of construction: 2017, total length: 2,000 mm, total height: 2,400 mm, total width: 1,350 mm, - Details: - └ Description: Excluding magnet - Year: 2017 - Documentation available: No - CE certificate present: No - Serial number: 600 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1475 - Hydraulic unit power [kW]: 3.0 - Oil tank capacity [L]: 48 - Number of shafts [pcs.]: 1 Nledpfxex Dik Re Ah Usk - Opening width [mm]: 600 - Opening length [mm]: 250 - Sieve perforation [mm]: 15 - Number of fixed knives [pcs.]: 20+ - Transport dimensions: 2000mm x 1350mm x 2400mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), operating hours: 1,500 h, - rotary shear type MEWA UC 201 - Electric drive 2 x 75 kW Nlsdpfxex E Tz Se Ah Ujk - Rotor length approx. 2 meter - width of the knives 70 mm - with chain conveyor for the outlet of the product It is a very powerful machine for shredding materials as tires or light scrap.

Condition: ready for operation (used), Year of construction: 2008, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2008 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality thoroughly tested. FLITS Rental & Sales service: with every machine, we supply a bundle of binding wire (120 wires). Do you need additional bundles of binding wire? Request a non-binding quote. At FLITS Rental & Sales, you can count on speed, transparency, and reliability. We think along with you, respond promptly, and ensure you have the right machine quickly. You are very welcome to view the machines at our location. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, allowing us to provide comprehensive information and show you the right machines. Nodpfjx Hz Hlox Ah Ujlk We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile press Waste Waste processing

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 14,000 mm, total width: 1,200 mm, Used Stadler Conveyor Year 2014 14 Metres x 1.2M Flat Conveyor Belt (Ref: 1105) Complete With 4.0kW Electric Motor / Gearbox Very Good Working Condition Heavy Duty. Made In Germany Large Selection Of Stadler Conveyors In Stock Nledpfx Ahjxyqupj Uok

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 15,000 kg, power: 5.5 kW (7.48 HP), electrical fuse: 25 A, empty load weight: 4,400 kg, Useful volume: 16 m³ Drive power: 5.5 kW Fusing: 25 A Own weight: 4,400 kg Permissible total weight: 15,000 kg Operating pressure: 200 bar with pendulum flap Nsdpfxox Nqkfs Ah Uolk

Condition: good (used), Year of construction: 2019, functionality: fully functional, Bale Press Dixi 80 SLD with lift/tilt device, semi-automatic, year of manufacture 2019 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2019 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Strapping: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, carton The press is in good condition. The operating manual is available. Please note: All technical data are based on the manufacturer's specifications. We assume no liability for the information provided or possible errors. This offer is subject to change and prior sale, and can be withdrawn at any time. Nlodpfxjx E Tdge Ah Uok Inspections are possible by appointment. The sale is ex works, prepayment required, without warranty or guarantee.

Condition: repair required (used), Year of construction: 1985, functionality: not functional, cutting force: 250 t, Used Becker Scrap Shear type 250T Length of box: 5.000 mm Cutting force: 250 Tonnes Machine is directly available! Njdpfxerfy Hno Ah Uolk Please contact us today for the interesting conditions.

Condition: good (used), Year of construction: 2020, GOOD CONDITION Shredder type TEREX Ecotec TDS 820, good condition Year of manufacture: 2020 Only 2,700 hours Nodpsx E Tzlsfx Ah Uolk Weight: 27,500 kg

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Nledpoxrtt Ejfx Ah Uek Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: good (used), Year of construction: 2015, functionality: fully functional, Baler Dixi 60 SLD, Year of manufacture 2015 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of construction: 2015 Nledpfx Ahjx E Tcvs Uek Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Press cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data is based on manufacturer information. We accept no liability for the stated details or potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Viewing is possible by appointment. Sale is ex works against prepayment, without warranty or guarantee.

Condition: reconditioned (used), - Screening machine Komptech Maxx - Workshop overhauled - Ready for operation - Approx. 6,850 hours on the clock - Drum screen perforation 25 x 25 mm - Both discharge conveyors equipped with magnetic head roller Drums with different perforations are also available. Nodpfxjx E Tyue Ah Ujlk Immediately available

Condition: new, Screen drums for almost all drum screen machines, manufactured with the highest precision! Made in Germany – from layout to production, everything from a single source! Almost any hole pattern can be realised! Manufactured from wear-resistant steel! Short delivery times! Unbeatable prices! Nljdpfx Ahjw Izl Ao Uok

Condition: good (used), Year of construction: 2012, functionality: fully functional, Baler Dixi 60 SLD, Year of Manufacture 2012 Manufacturer: Maschinenfabrik Bermatingen Model: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 32 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Please note: All technical data are based on the manufacturer's information. We assume no liability for any errors or the accuracy of the information provided. This offer is subject to change and prior sale; it can be revoked at any time. Nodox E Tccepfx Ah Uelk Inspection by appointment only. Sale is ex works, payment in advance, without warranty or guarantee.

Year of construction: 2014, condition: good (used), READY FOR USE Nljdpfex E Tx Rox Ah Ujk Komptech NEMUS 2700 in good condition approx. 8,000 h

Condition: like new (used), We offer a comprehensive spare parts package for the machine types Doppstadt DW 3060 and Doppstadt AK 430/435/560. These are new and as-new parts! Please request our list! Do you have a problem with your bevel helical or planetary gearbox? We offer qualified repair service, spare parts, and new gearboxes! We will accept your defective gearbox as part exchange after inspection! Please send us your enquiry! Nedpfx Ahoqx Ur Do Uelk

Condition: good (used), Year of construction: 2019, operating hours: 492 h, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2019 Technical Data: Manufacturer: HSM Model: V-Press 1160 plus Stock No.: 9969 Year of manufacture: 2019 Operating hours: 492 Pressing force: 55 t Drive power: 4 kW Idle cycle time: 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions: 1700 x 1800 x 2200 mm (W x D x H) Weight: 2430 kg Materials: Paper, cardboard, film Njdpox E S Anefx Ah Uolk The baler is in good condition. Operating manual is available. Please note: All technical data is based on manufacturer's information. We do not accept any liability for the details provided or for possible errors. All offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible upon prior arrangement. Sale is ex works, without warranty or guarantee. Our payment terms: 100% advance payment.

Condition: new, warranty duration: 12 months, - Electric Drum Screen Machine - Drum length 7000 mm, diameter 2000 mm - Motor 22 kW - with electrical cabinet - with cleaning brushes - screen mesh size and color according to customer´s choice Nlodpfox E Txwjx Ah Ujk - new machine manufactured in Europe - with manuals and CE - 1 year warranty

Condition: new, We supply wear parts for your Doppstadt AK 430, 435, 510, 535, 560, 635, 640, etc. Highest quality thanks to 'Made in Germany'! - Rear baskets - Rear flaps - Impact plates, toothed, with counter blade, smooth - Wear plates - Scraper floor bars - Scraper floor chains - Flail tips Nlodpfx Ahjw I Ar Rj Usk - Flail holders - And much more.

Year of construction: 2011, condition: good (used), READY FOR USE Terra Select T6 screening machine in good condition. Nledpfxex E Txqj Ah Ujk Approx. 10,200 operating hours.

Condition: new, ++++OUR NEW PRODUCTS++++ NEW OVERBAND-MAGNETS WITH HYDRAULICMOTOR FOR MOBILEMACHINES USEABLE QUALITY PRODUCTS MADE IN EUROPE 500 TO 1500 MM WIDE Nedex E Tvpopfx Ah Uolk WE CAN OFFER SUPPORT OPTIONALLY 1 YEAR WARRANTY FAST DELIVERY ATTRACTIVE PRICES ++++ASK FOR OFFERS++++