Condition: new, machine/vehicle number: 12007, Technical data: Cutting area: 700 x 1300 mm Gedpfx Ajyr Tpueg Hsbk Number of cutting discs: 18 Cutting disc width: 65 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2900 kg

Condition: new, The briquette press is designed for compressing all types of sawdust and wood shavings into briquettes. The briquetting press features a compact, user-friendly design and is manufactured in Germany. The large oil tank enables continuous operation. The briquette press is ready for immediate use – simply plug it in and start working. Gbjdsyr Tpnopfx Ag Hjk

Condition: used, machine/vehicle number: 12579, Rotor diameter: 450 mm Rotor width: 650 mm 3-knife rotor 2 rows of stator knives Infeed cross-section approx. 450 x 650 mm Gbsdpsyr Tphsfx Ag Hok Drive motor: 37 kW

Condition: used, machine/vehicle number: 9232, Rotor blades: 11 x 3 Stator blades: 2 Gsdpsyr Tpbjfx Ag Hsbk Rotor diameter: 350 mm Inlet: 500 x 650 mm Drive: 7.5 kW

Condition: used, machine/vehicle number: 12464, Rotor diameter: 420 mm Rotor width: 650 mm 5-knife rotor 2 rows of stator knives Feed opening approximately 420 x 650 mm Drive motor: 37 kW Gbjdpeyr Tn Rofx Ag Hjk

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm Godoyr Tn Dspfx Ag Hobk 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12195, Infeed: 600 x 600 mm Drive: 2 x 37 kW Gbedpfx Asyr Tnqog Hsk

Condition: used, machine/vehicle number: 12178, Rotor diameter: 600 mm Rotor width: 750 mm 9-blade rotor Gjdpfx Aoyr Tnkjg Hobk 6 rows of stator blades Inlet cross-section approx. 750 x 600 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 12139, Rotor diameter: 260 mm Rotor width: 410 mm 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 400 x 500 mm Gjdpfxsyr Tndj Ag Hobk Drive motor: 7.5 kW

Condition: used, machine/vehicle number: 12006, Rotor diameter: 600 mm Rotor width: 930 mm 7-blade rotor Gsdpfx Ageyr Tm Tj Hebk 2 rows of stator blades Inlet cross-section approx. 600 x 900 mm Drive motor: 75 kW Weight approx. 6000 kg

Condition: used, machine/vehicle number: 11924, Rotor diameter: 500 mm Godpfxsyr Tm Hs Ag Hjbk Rotor width: 800 mm 5-blade rotor 2 rows of stator blades Inlet cross-section approx. 800 x 450 mm Drive motor: 55 kW

Condition: used, machine/vehicle number: 11667, Rotor diameter: 450 mm Rotor width: 600 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 450 x 600 mm Drive motor: 30 kW Gbsdpfx Aeyr Tmteg Hek

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Rotor width: 300 mm Gbjdpfxsyr Tmmj Ag Hjk 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 11647, Rotor blade row: 3 Stator blade row: 2 Gjdpfx Agjyr Tmgj Hsbk Rotor width: 280 mm Rotor diameter: 280 mm Inlet dimensions: 300 x 300 mm

Condition: used, machine/vehicle number: 11648, Roller feeder on the hopper Rotor blade rows: 3 Stator blade rows: 2 Rotor width: 520 mm Rotor diameter: 340 mm Inlet dimensions: 500 x 350 mm Gjdsyr Tmaopfx Ag Hebk

Condition: used, machine/vehicle number: 11649, Rotor knife rows: 4 Stator knife rows: 2 Rotor width: 600 mm Gsdpfeyr Tl Nex Ag Hebk Rotor diameter: 280 mm Feed opening dimensions: 400 x 600 mm

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor – cross-shear cutting rotor 2 rows of stator knives Infeed opening approx. 650 x 100 mm Drive motor 75 kW Machine features: Gbsdpfsyr Tl Aox Ag Hjk The cross-shear cutting rotor ensures optimal material intake and distribution, resulting in high throughput with reduced energy consumption. Electro-hydraulic opening of the mill housing and screen basket. The screen insert can be rotated 180° and reused after one-sided wear. Rotor knives can be adjusted outside the mill using a setting device, reducing downtime.

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Godpsyr Tlvsfx Ag Hsbk Drive motor 55 kW With soundproof box, mobile

Condition: new, The AMIS twin-shaft shredder is equipped with a CNC-manufactured, heavy-duty grinding chamber that is fully bolted for easy maintenance. Both the machine housing and the bearings are protected by wear rings and plates. The geared motors drive the two hexagonal working shafts, which can be fitted with various interchangeable cutting discs. The two working shafts are mounted in large-sized SKF spherical roller bearings with lifetime lubrication. Optionally, an automatic, battery-powered continuous lubrication system for the main bearings can be installed. Special features The change of wear plates and scrapers does not require disassembly of the machine housing. Thanks to the horizontally split bearing plates, the rotors including the bearings can be inserted or removed from above in a very short time. This allows for quick and easy rotor changes with different cutting tools. The size of the grinding chamber can be modified with relatively little effort due to the bolted housing design. Motor configuration, gearbox size, installation position, and rotor speed can all be adjusted as required. Technical Data Cutting chamber: 600 x 1200 mm Number of cutting discs: 60 (made of Hardox) Cutting disc width: 19 mm Maximum cutting disc diameter: 295 mm Scrapers: 2 Drive power: 2x 15 kW, 400 V, 50 Hz Weight: 2,800 kg Electrical control The machine is operated via a modern Siemens S 7/1200 controller featuring an advanced 7-inch touchscreen display. Both geared motors are controlled depending on load, and feature a reversing operation. Three different control programs are available depending on the material and application. Options The machine can be tailored for a wide range of applications to meet customer requirements. A variety of options are available: Customized base frames Special hoppers Grinding unit with different tools/cutting discs (diameter, size, thickness, shape, material grade) Various drive power ratings Different gearbox sizes with variable speeds Godeyr Tlpepfx Ag Hobk

Condition: used, machine/vehicle number: 11552, Rotor diameter: 2 x 150 mm (duplex rotor) Rotor width: 200 mm Gjdpsyr Tlcofx Ag Hsbk 2 x 12 rotor blades 2 + 1 stator blade Inlet cross-section approx. 350 x 200 mm Drive motor 15 kW The counter-rotating cutting rotors of the SM Duplex ensure good feeding performance for bulky, thin-walled parts and lightweight hollow bodies. The granulator can be used as a central granulator or as a stand-alone granulator on an injection molding or blow molding machine. This makes it suitable for shredding sprues or rejects that arise, among other things, during machine start-up.

Condition: used, machine/vehicle number: 11550, Rotor diameter: 300 mm Rotor width: 140 mm 10 rotor knives 2 rows of stator knives Cross section approx. 250 x 300 mm Gbedpfoyr Tk Sjx Ag Hok Drive: 5.5 kW

Condition: used, machine/vehicle number: 9993, 9-blade rotor 3 rows of stator blades Rotor diameter 400 mm Godpfxeyr Tk Es Ag Hebk Working width 500 mm Inlet cross-section for window profile bars approx. 200 x 460 mm Drive motor 30.0 kW

Condition: used, machine/vehicle number: 11431, Rotor diameter: 450 mm Gsdpfx Agjyr Tkro Hjbk Rotor width: 600 mm Paddle rotor 3×3 rotor knives (offset), 2 rows of stator knives Infeed cross-section approx. 550 x 625 mm Drive motor 30 kW Application: Primarily suitable for shredding hollow blow-moulded bodies and bulky moulded parts such as bottles, canisters, jugs, bowls, baskets, buckets, tubs, etc.

Condition: used, machine/vehicle number: 11415, Rotor diameter: 260 mm Rotor width: 260 mm 3-blade rotor, 2 rows of stator blades Inlet cross-section approx. 260 x 260 mm Drive motor 5.5 kW Gbjdpfoyr Tklsx Ag Hjk Grinding mill with built-in feeder for bar stock. Weight approx. 500 kg

Condition: new, The ZSH chipper series is specifically designed for forestry, horticulture, and municipal operations. These chippers are primarily used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. The produced wood chips are suitable for combustion in wood chip heating systems with screw conveyors or as a pre-stage in pellet production. The machines are robust, reliable, easy to operate, powerful, and produce wood chips of consistent quality and uniform size. Gbedpfx Agoyr Tkfs Hok Other features Cost-effective solution for wood chip production | Compact design | User-friendly | Low energy consumption