Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Cedpedv Eu Hefx Abwori Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Csdpfx Abozv U Ifewjri Hydraulic unit with control cabinet and operator panel, 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Cedpezuwu Eofx Abweri Number of axles: 2 Number of fixed blades: 18 Screen perforation: 20 mm MACHINE DETAILS Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1

Condition: used, Year of construction: 2006, Doppstadt DW 3060 E Büffel – Electric Shredder We are offering the following used Doppstadt shredder for sale: Technical data and equipment: Manufacturer / Model: Doppstadt DW 3060 E Büffel Year of manufacture: 2006 Codpfx Ajz Ntcgjbwori Drive: Electric motor, 315 kW Roller configuration: 21 teeth Control cabinet Lower conveyor belt Side conveyor belt, 9m Remote control Feed hopper with extension Dismantling and loading: The machine will be dismantled and loaded. If you are interested, we will be happy to provide you with further information, photos, or arrange a viewing.

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Crjdpfx Abjz Rfz Rjwji Contact us for your individual offer!

Year of construction: 2024, operating hours: 355 h, condition: used, 2024 | Keestrack K4 | Used Screen | 355 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Crsdpfx Asz N Hq Djbwji 💰 Buy Now for EUR 225000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 77 inspection points 77 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: In the state of a new machine 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41381 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Csdjz N Al Rjpfx Abwori Our screening drum has been structurally optimized to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk materials – depending on the selected hole size ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole design – 18 to 21 mm The openings are laser-cut in a trapezoidal shape and widen from approximately 18 mm to 21 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ uniform screening process. As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. ----- A special structural advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side for approximately 15–30 mm. This keeps the highly stressed area closed and provides greater material stability. ➡️ higher load-bearing capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Rectangular alignment of the holes in the direction of material flow This ensures that the material is guided in a controlled manner across the screening area, and the available screening area is used efficiently. ----- YOUR ADVANTAGES ✅ Optimized screening performance ✅ Lower tendency to clog ✅ Uniform material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing operations ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the right drum, design, or hole size, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. ----- INDIVIDUAL HOLE DESIGN POSSIBLE Depending on the application, different hole sizes or mesh widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will be happy to check the suitable design for your application. MANUFACTURER RKS Metallverarbeitung GmbH, 48336 Sassenberg

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale width: 730 mm, bale height: 1,100 mm, bale weight: 500 kg, total width: 1,047 mm, total height: 3,079 mm, total length: 1,850 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,300 kg, input frequency: 50 Hz, Strautmann PP 1207 Plus Baler – Year of manufacture 2004 Used vertical baler, Strautmann PP 1207 Plus, for the efficient compaction of cardboard, paper, film and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: PP 1207 Plus Year of manufacture: 2004 Pressing force: 580 kN / approx. 59 tons Motor power: 4 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 730 mm Bale weight: approx. 400–500 kg, depending on the material Feed opening: approx. 1,190 x 600 mm Machine weight: approx. 2,300 kg Dimensions: approx. 1,850 x 1,047 x 3,079 mm (L x W x H) Codpfxez Ht Eze Abweri Transport height: approx. 2,170 mm Noise level: below 80 dB(A) The machine is suitable for volume reduction and compaction of cardboard, paper and film. For transport, the machine can be partially disassembled. The hydraulic ram must then be reassembled professionally. Inspection possible by appointment. All information without guarantee. Subject to prior sale.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required Crsdez Hxirepfx Abwji With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Condux Granulator type CS 300/600-4 WK Crsdpfx Ajz Hxixobwei Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Crsdsz Hxmwspfx Abwsi Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control Codpfsz Idb Nox Abwori - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm - Teeth: 24

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Csdpjy Ra D Rofx Abwjri

Condition: new, functionality: fully functional, Year of construction: 2022, Wearing parts SPECIAL OFFER for e.g. SBM 10/10/4 SM, consisting of: Crjdpfx Aoy Au Ihsbwei 1 pc. grinding plate 160790 4 pcs. spreader segment (2 x right / 2 x left) 05628 4 pcs. spreader segment (2 x right / 2 x left) 05629

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Credpfx Aozbtvtsbwoi Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Weight of a single bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m long, 2.5 m wide, approx. 2.6 m high Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features: large opening for loading cardboard Codjra Dddjpfx Abwjri option for automatic feeding (e.g., with a conveyor) manual wire binding (4 wires) pallet locking and hydraulic door for bale removal Advantages of this press: large bales = fewer transport trips high crushing force designed for continuous operation Available production years: 2017-2018

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Cjdpfxsz A Ty De Abwori Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Crsdpfx Abez A Tzbswsi Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. Credpfx Absz A T Dcowsi The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Crsdpoz A Sz Hofx Abwoi Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: used, overall weight: 2,000 kg, rotor diameter: 252 mm, total length: 2,200 mm, total height: 2,520 mm, total width: 1,500 mm, rotor width: 800 mm, power: 18.5 kW (25.15 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, sieve perforation: 15 mm, extraction nozzle diameter: 200 mm, No. 04546 Single-shaft shredder WEIMA WL 6 Crodpfx Abjznnf Ujwei Used Single-shaft shredder for shredding wood waste, offcuts and panel materials Motor power 18.5 kW Rotor diameter 252 mm Rotor width 800 mm Rotor speed 90 rpm Infeed opening 1000 x 800 mm LW V-rotor system Hydraulic material pusher Manual and automatic operation Perforated screen with a hole diameter of approx. 15 mm Two-part feed hopper approx. 1050 x 1000 x 1800 mm LWH (each of the two hopper sections is approx. 900 mm high) 2 extraction ports, diameter 200 mm each Transport dimensions approx. 2200 x 1500 x 2520 mm LWH Weight approx. 2000 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Cedpfoy D Ug Tjx Abweri Output: approximately 150 - 180 kg/hour, depending on the material. Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 19439, pressing force: 38 t, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 32 A, operating pressure: 200 bar, oil tank capacity: 80 l, pressure: 200 bar, year of last overhaul: 2023, Avermann AVOS SP-12 stationary baling container | Overhauled in 2023 | Not used since For sale: Avermann AVOS SP-12 stationary baling container, year of manufacture 2014. This reliable Avermann baling container was overhauled by us in 2023 and has not been used since the overhaul. As a result, this is an interesting machine for anyone looking for a well-maintained used baling container that can be put back into operation immediately. The AVOS SP-12 is a robust baling container, suitable for compacting various waste streams and ideally applicable in industries, logistics companies, manufacturing companies, and waste processing plants. Crjdpfxsz Enube Abwji Technical data: Brand: Avermann Type: AVOS SP-12 Year of manufacture: 2014 Serial number: 19439 Power: 7.5 kW Power supply: 3 x 400 V + N + PE, 50 Hz Fuse rating: 32 A Maximum working pressure: 200 bar Protection class: IP55 Integrated hydraulic pressing unit Large feed opening Suitable for transport with a hook lift Specifics: The machine was overhauled by us in 2023. After this overhaul, the baling container has not been used and has been idle since. The machine is in good used condition visually. There are, of course, some minor signs of wear and tear that are consistent with the age and type of machine. A great opportunity for companies looking for a professional Avermann baling container at a more attractive investment than a new one. Inspection and testing are possible by appointment. Please feel free to contact us for more information, pricing, or technical questions. Keywords: Avermann, AVOS, SP-12, baling container, waste compactor, container compactor, waste compaction, recycling, compactor, pressing unit, self-compacting container.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 24559, pressing force: 34 t, total width: 2,400 mm, total length: 6,500 mm, total height: 2,400 mm, overall weight: 4,635 kg, filling opening length: 1,000 mm, filling opening width: 1,900 mm, power: 5.5 kW (7.48 HP), Well-maintained waste container Csdpfxjz En Dpe Abwori Husmann SPB20SEN Lifting and tilting mechanism for 660-liter roll-on/roll-off containers Lifting and tilting mechanism with increased height for a 1,200 mm high platform Discharge flap

Condition: new, Year of construction: 2026, operating hours: 3 h, functionality: fully functional, overall weight: 5,250 kg, rotor diameter: 320 mm, total length: 3,861 mm, total height: 2,229 mm, total width: 2,418 mm, rotor width: 1,262 mm, power: 55 kW (74.78 HP), rotational speed (max.): 90 rpm, warranty duration: 24 months, input voltage: 400 V, As the top model in the series, the Robust Reuser SD 1300 single-shaft universal shredder is designed for continuous heavy-duty operation. Equipped with a robust rotor (diameter 320 mm), up to 55 kW of power, and a 120 l hydraulic unit, it operates with maximum efficiency and sets new standards for capacity and durability. High-performance single-shaft system for maximum throughput Flexible feeding options: conveyor belt, excavator, forklift, or lifting arm Siemens® PLC with ReSmart™ control (optional remote access) Cjdpfx Ae Adqdvjbwjri ReBoost™ & ReMotion™ technologies for smooth and rapid operation without blockages Externally mounted rotor bearings for easy and quick maintenance Hardox® screen for absolutely homogeneous final granules