Year of construction: 2007, operating hours: 7,682 h, condition: excellent (used), functionality: fully functional, Used Powerscreen Chieftain 1400 Tracked Screening Plant Year 2007 Bdjdpfxe Ahpxmj Apnsi +/- 7682 Hrs Just Been Fully Serviced On Engine & Hydraulics New HRC Couplings Various New Rollers Steam Cleaned Deutz Engine 11ft x 5ft Two Deck Screenbox Tipping Grid 24,000 kgs Weight All Belts, Rollers, Bearings In Very Good Working Condition

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Bedpfsz Eh Ihex Apnedi Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Year of construction: 2013, operating hours: 3,300 h, condition: excellent (used), functionality: fully functional, Used Terex Finlay 883 Tracked Screening Plant Year 2013 3300 Hrs (Hr Clock Has Reset At 3000. Common Issue On Terex Control Panels) 16 x 5 Screenbox 55mm Fingers Top Deck & Mesh Bottom Deck CAT 4.4 Bsdpfoz Nlf Hex Apnodi No Adblue / DPF Very Good Unit. Ready To Go To Work 32,000 kgs Weight

Year of construction: 2022, operating hours: 6,100 h, condition: excellent (used), functionality: fully functional, Year 2022 6100 Hrs CAT 4.4 Tier 3A No Adblue / EGR Bdodpfx Ao Adly Eepnei 16 x 5 Two Deck Screenbox 50mm Punch Plate Top Deck & 15mm Square Mesh 32,500 kgs Excellent Condition Ready To Go To Work

Year of construction: 2016, operating hours: 3,600 h, condition: excellent (used), functionality: fully functional, Used Terex Evoquip Colt 800 Tracked Screening Plant Year 2016 3600 Hrs 9 x 4 Two Deck Screenbox Bdsdsz Nkumspfx Apnsi Woven Wire Top Deck & Bottom Deck CAT Power No Adblue 17,000 kgs Weight Excellent Condition Ready To Go To Work

Year of construction: 2016, condition: excellent (used), functionality: fully functional, Used Blue Mac 2510 Static Trommel Year 2016 10 M Long x 2.5 M Diameter 50mm Round Holes, 8mm Thick Bjdpfxszzrwbo Apnsdi All New Drive Shafts & Wheels 4 x 5.5kW Electric Motors / Bonfiglioli Gearboxes 21 Tonne Weight Excellent Condition Ready To Go To Work

Year of construction: 2013, operating hours: 700 h, condition: excellent (used), functionality: fully functional, Used Westeria Airtrack 1 Tracked Windsifter Year 2013 700 Hrs 2000mm wide feed belt / rotating drum Heavies Belt / Lights Belt Volvo Diesel / Electric Generator Driven 19,000 kgs Very Nice Unit Bdjdpfx Aoyyxx Ejpnoi Fully Serviced & Ready To Go Straight To Work

Year of construction: 2008, operating hours: 18,500 h, condition: ready for operation (used), functionality: fully functional, Universal granulator MeWa UG 1600, Drive power: 110 kW, Rotor length: 1600 mm, Bdodpfx Ape Ahtimonoi Hydraulic feed system (HNDE), Control cabinet, Includes discharge conveyor, stairs, and railings. Wear parts have been replaced. Available from approximately the end of November 2026.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 53 h, functionality: fully functional, type of input current: three-phase, power: 15 kW (20.39 HP), input voltage: 400 V, overall weight: 2,100 kg, total length: 120 mm, total width: 100 mm, total height: 180 mm, UNTHA RS30 HD Shredder – H-4 – Only 53 operating hours – 15 kW For sale: UNTHA RS30 HD industrial hard drive shredder, specifically designed for professional and secure data destruction. This high-quality, 4-shaft shredder is designed for the destruction of hard drives (HDDs) and features a fine screen for controlled, small output particle size. The machine was purchased at the end of 2017 and has only approximately 53 operating hours. As a result, the shredder has been used very little. Technical specifications: • Brand: UNTHA • Type: RS30 HD • Year of purchase: 2017 • Motor power: 2 × 7.5 kW (15 kW total) • Design: Industrial 4-shaft shredder • Application: Destruction of hard drives (HDD) • Security level: DIN 66399 H-4 • Operating hours: Approximately 53 hours • Power supply: 400 V three-phase power • Screen: Fine screen for small output particle size • Control: Electrical control panel with emergency stop Special features: • Very few operating hours • Professional HD version for data destruction • Robust industrial construction Bdedpj Ahg Hvjfx Apnsi • Original purchase invoice available • New price in 2017: €40,000 excl. VAT • Machine is in used condition, see photos Suitable for: • Professional data destruction companies • ITAD and IT recycling companies • Electronics recycling • Data centers and IT service providers • Companies that want to destroy hard drives internally Asking price: €26,000 excluding VAT The machine is available for inspection by appointment in Haaksbergen. Negotiations are possible for serious inquiries. Please feel free to contact us for additional information or photos.

Condition: used, functionality: unexamined, machine/vehicle number: 10 046, Model: RB 2.2/700/60 S / Dimensions: approx. 4 m high Manufacturer: RUF Machine No.: 10 046 as shown in the picture without any other items shown Note: If technical or electronic devices are included, their functionality has not been tested. Note: Pallets are included as part of the item, if shown in the picture. Bdsdpfo Aht Ttex Apnoi This RUF RB 2.2/700/60 S briquetting press is being auctioned online in our industrial auction / machine auction “Closure of a well-known printing company: printing machines, extensive printing machine accessories, production technology, spare parts, conveying technology, workshop and operational equipment as well as storage and office furniture.” You will find this and many other items from the areas of equipment & machines, production equipment, and workshop equipment on our platform.

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, year of last overhaul: 2025, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM Bdjdpfxo Ahnl Ro Apnji - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, overall weight: 10,000 kg, loading space length: 1,300 mm, loading space width: 1,000 mm, total height: 3,400 mm, total length: 3,500 mm, total width: 2,000 mm, power: 90 kW (122.37 HP), input voltage: 380 V, rotary shear 2 shafts - 2 motors 15kw and 12kw - inversion in case of jam - shredding chamber 1100 x 900 - thickness of new knives 30 - 4 tons - large loading hopper - possibility of loading Bjdpfxj Ahrp Re Apnsdi very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, overall weight: 3,500 kg, rotor diameter: 420 mm, number of blades: 44, rotor length: 800 mm, power: 22 kW (29.91 HP), type of input current: three-phase, rotational speed (max.): 100 rpm, input voltage: 400 V, additional equipment features: Swan Neck Conveyor, Equipment: CE marking, The S-22 shredders are designed for optimal ease of maintenance and serviceability. It features easy access to all service points, including interchangeable screens and knives, allowing for quick and efficient replacements or adjustments. The machine is equipped with a hydraulic tipping Bdodpfx Ape Aa Anrjnoi hopper, which provides effortless access to the cutting chamber, making the removal of foreign objects both safe and straightforward. Additionally, the swing-out power pack design enhances accessibility, streamlining routine maintenance and minimizing downtime. • Rotatable knives for an extendable lifetime • Rotational speed adjusted to suit material • Compact and solid design • Low maintenance efforts and easy installations S-22 comes with swan neck conveyor designed to discharge shred into 1m3 bags. Option of 20mm, 30mm and 60mm screen size. APPLICATIONS • Plastics • Wood / Timber • Packaging • Cardboard

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, overall weight: 20,500 kg, number of blades: 50, control cabinet length: 3,000 mm, control cabinet height: 2,300 mm, power: 200 kW (271.92 HP), rotational speed (max.): 264 rpm, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. Bdedpfs Ahnqyex Apnji The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: used, Year of construction: 2012, operating hours: 33,400 h, functionality: fully functional, control cabinet height: 2,300 mm, number of blades: 28, year of last overhaul: 2025, overall weight: 33,000 kg, type of input current: AC, Lindner Jupiter 2200 – Year of manufacture 2012 – 264 kW – Pre-shredder For sale is a powerful and regularly maintained Lindner Jupiter 2200, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial pre-shredder for processing various commercial waste and recyclable material fractions and was permanently integrated into our stationary production line. Technical data Manufacturer: Lindner Recyclingtech Model: Jupiter 2200 Year of manufacture: 2012 Machine number: 1744 Machine weight: approx. 33,000 kg Drive power: 2 × 132 kW (264 kW total) Rotor speed: 51 rpm at 50 Hz Operating voltage: 400 V / 50 Hz Number of knives: 28 pieces Knife dimensions: 116 × 116 × 37 mm Screen opening: Sickles 79 mm Frequency converter: ABB ACS-800 Hydraulic unit: Bosch Rexroth Hydraulic drive: 11 kW Hydraulic oil tank: 400 liters Equipment and special features The Jupiter 2200 features a frequency-controlled drive and a hydraulic feed unit for controlled material feed. Bsdpfxs Ahnlbo Apnodi The robust design and powerful cutting unit enable use in industrial recycling and processing plants. Maintenance and servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists for the Jupiter 2200 with the manufacturer Lindner Recyclingtech. In addition to the regular maintenance, extensive maintenance and modernization measures were carried out. Important work carried out: Both couplings completely overhauled. Control computer and display renewed. Rotor completely armored and regularly serviced. Air conditioning unit renewed. Both frequency converters (FC) overhauled. Complete new set of sickles installed. The corresponding maintenance and service records are available and can be viewed upon request. Protected housing of the control cabinets The associated control cabinets are located in a separate control room and are therefore protected from dust and dirt from the production environment. Sale due to plant modernization The machine is being offered for sale as part of the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Dismantling and loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your inquiry.

Condition: ready for operation (used), Year of construction: 2014, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2014 Pressing force: 532 kN Voltage: 400 Max. bale weight: up to 550 kg (depending on the material) Bdedpe Aguyzsfx Apnoi Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Feed opening dimensions: 119.5 cm x 65 cm The HSM 1160 V-Press offers simple operation, a powerful pressing force, and is energy-efficient. Are you looking for a more compact model? Then take a look at the HSM 860 – ideal for those who want to save space without compromising on pressing force. Video available upon request!

Condition: good (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, A shredder for waste processing in good condition is for sale. Bdedpoz R Ttvjfx Apnji The system is complete (hydraulics, electrical components, and conveyor belt) and includes an additional shredding table. The machine can be inspected at any time.

Year of construction: 2012, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 363/15862010, The rotary bed dryer WB-T (model 1.00 / 3.00) from Allgaier Process Technology GmbH is a specialized industrial plant for the continuous, uniform, and gentle drying of bulk materials and biomass. In process engineering, the model designation (1.00 / 3.00) typically refers to the dimensions of the drying area, i.e., a bed width of 1.00 meter and a bed length of 3.00 meters. The heating capacity is 250 kW and is powered by electricity. Typical applications: • Biofuels & wood industry: Drying of wood chips, sawdust, and bark for pellet production. Bdedjz Rz Dnspfx Apnei • Waste management • Agricultural & recycling industry: Processing of fermentation residues (from biogas plants), green waste, sugar beet pulp, or bagasse. Operating principle: The technology combines the process engineering advantages of a drum dryer with those of a fluidized bed dryer: • Rotary bed mechanism: The wet product lies inside on a perforated flow bed (perforated sheet). A targeted mechanical movement or tumbling in combination with the airflow creates a rotating or rolling product movement ("rotary bed"). • Counter-current or cross-current ventilation: The drying air is blown from below through the sieve bed and flows intensively through the tumbling product. This ensures an optimal heat and mass exchange. Main features & advantages: • Low-temperature drying: The plant is ideally designed for operation with waste heat or low-temperature heat sources (e.g., from combined heat and power plants/CHP or industrial residual energy). • Long residence time: This enables particularly gentle dewatering of the material while simultaneously ensuring high homogeneity of the residual moisture. • Robust particle processing: In contrast to pure fluidized beds, large, irregular, or sticky particles can also be processed economically. • Integrated screening: The flow effectively reduces fine dust and sand content during the process.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 6,000 V, overall weight: 6,200 kg, rotational speed (max.): 1,490 rpm, input current: 255 A, input frequency: 50 Hz, This high-voltage motor was kept in stock after being overhauled but was never installed. In the meantime, it is no longer needed, as a more powerful type of motor has been installed in this system. Bodpe Ahngwefx Apnjdi

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Bdodeznm H Djpfx Apnoi

Condition: used, Year of construction: 2022, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: GL61180KC, The 3E shredder is currently still in use. It will soon be replaced with a more powerful machine. Shaft length: 1800mm 2 x 90kW motors The sale of this machine includes 1 new gearbox and 2 used gearboxes. Bodpez Rmt Uofx Apnodi Also included are 1 new motor and 2 used motors. For more information, please visit the 3E Machinery website, where we purchased this machine. This shredder has always been used for shredding car tires.

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 400 V, electrical fuse: 11 A, empty load weight: 5,370 kg, DGUV certified until: 11/2027, Compactor container LM20 GL DR HKV 20 m³ compactor container for roll-off tippers with lifting and tilting mechanism (raking and rear gate discharge) Bjdpo Ahmzksfx Apnjdi Technically refurbished Repainting in the desired RAL color is possible.

Condition: ready for operation (used), Year of construction: 2016, Make: HSM Model: V-press 860 plus Year of manufacture: 2016 Press force: 418 kN Voltage: 400 Max. bale weight: 480 kg (depending on the material) Bale dimensions: 120 x 120 x 78 cm Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Feed opening dimensions: 120 cm x 65 cm Bdjdpfxs Afdmas Apnoi Video available upon request.

Condition: used, total length: 1,750 mm, total height: 1,660 mm, total width: 1,500 mm, Year of manufacture: 2010 Colour: White Empty weight: 1.200 kg - Year: 2010 - CE marking present: Yes - Serial number: 0509 - Main motor power [kW]: 18.5 - Rotor width [mm]: 630 - Number of shafts [pcs.]: 1 Bdedpj Agntljfx Apnsi - Hydraulic slide present: Yes - Opening width [mm]: 810 - Opening length [mm]: 630 - Sieve perforation [mm]: 20 - Number of rotating knives [pcs.]: 28 - Transport dimensions: 1750mm x 1500mm x 1660mm (l x w x h) - Transport weight [kg]: 1200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2019, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: R1253899, overall weight: 2,200 kg, rotor diameter: 500 mm, rotor width: 840 mm, type of input current: three-phase, A very robust shredding mill. Machine data: 2200 kg; 1478/562 RPM, 45 kW Rotor 500x840 mm, 5 rows of rotor knives, 5 rows of stator knives Cast iron rotor, inlet approx. 1000x300 mm, Bdodozl E Stopfx Apnei Screens with 3-2.5-1 mm mesh A control panel is not available and must be built by the buyer. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in the Netherlands, the R&D center will be closed. The machines will be transported to Europe at the owner's expense and can be picked up at a port or at the production facility in the Netherlands, EXW. The details for optimal transport need to be clarified. The machine price is without packaging on a pallet.