Used Wide belt sanders 1300-1499mm working width for sale (117)

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, motor voltage: 400 V, frequency: 50 Hz, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Cgob Hblsu Hlzfstzet Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.

Condition: excellent (used), DMC wide belt sander Type LSL 130 b1 Grinding unit - section shoe + brush working width max 1300 mm Working height 3 - 160 mm Smooth feed regulation Cgeb Hbltep At Tcezet Vacuum table

Condition: good (used), Year of construction: 2000, Functionality: fully functional, machine/vehicle number: SA / 004174, working width: 1,350 mm, overall weight: 2,500 kg, height adjustment type: electric, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, motor voltage: 400 V, frequency: 50 Hz, Machine with a longitudinal sanding belt, suitable for lacquer sanding. Equipped with brush roller and electronic sectioned pad. Vacuum in the table and carpet. Cob Hbleugn Dmjtzjgt

Condition: used, machine/vehicle number: 005354, Max. machining width: 1350 mm Cgeb Hbltou A Evujzot Min. machining thickness: 4 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 5 Nr sectioned swab: yes

Condition: excellent (used), Year of construction: 2001, Functionality: fully functional, machine/vehicle number: A11108GM1, Costa K6 CCC 1350 Wide Belt Sander Ceb Hswczkijbltzjgt Year of production: 2001 Technical condition: very good after major renovation at COSTA in 2023 Costa K3 CCC 1350 Wide Belt Sander sander from 2001 is a solid industrial machine designed for sanding and calibrating wooden surfaces. The machine has a fixed table and a movable working part with rollers The additional machine has a vacuum table powered by its own fan Here are the key technical data of this machine: - Sanding width: 1350 mm - Number of sanding units: 3 (steel calibration shaft, 2x rubber shaft - Cleaning or sanding brush Length of the sanding belt 3250 mm

Condition: excellent (used), DMC Topsand 2000 calibrating and sanding machine 4 Belts First group 1 roller Second group 1 roller Third group 1 electronic sectioned pad Cgjb Hboi Dakroltzst Fourth group 1 electronic sectioned pad super finisher Useful width 1350 Vacuum system on belt

Condition: excellent (used), Year of construction: 2009, Functionality: fully functional, feed rate X-axis: 25 m/min, working width: 1,350 mm, overall weight: 7,000 kg, height adjustment type: electric, grinding belt length: 3,250 mm, table height adjustment: 137 mm, air demand: 213 m³/h, input voltage: 400 V, Good day, We present for purchase a Heesemann LSM8 wide belt sander from 2009, equipped with two longitudinal sanding units, a reading keyboard with sensors every 16 mm - the most accurate reading used in Heesemann. Working width: 1350 mm Working height: 880 mm Transport belt feed speed: 5-25 m/min Height of processed elements: 3-140 mm Transport belt cleaning system - blowing off and extracting dust. At the entrance to the machine and at the exit - transport rollers supporting the elements. Cjb Hjwca Nksbltzogt Element pressure rollers - fi 70mm New, colorful, touch control panel. Longitudinal unit 1 Abrasive belt: 3250x1400 mm + abrasive belt cleaning Belt speed: 0.5-20 m/s - 22kW engine power, smooth adjustment - inverter Combi unit - possibility of performing light calibration work "Door in door" system - possibility of monitoring work in real time Pressure foot - SCD system - electromagnetic pressure. Longitudinal unit 2 Abrasive belt: 3250x1350 mm + abrasive belt cleaning Belt speed: 0.5-20 m/s - 22kW engine power, smooth adjustment - inverter "Door in door" system - possibility of monitoring work in real time Pressure foot - SCD system - electromagnetic pressure. Dust extraction: Dust extraction brush fi 150 mm - Tampico + dust blowing rotors. The machine is in very good condition, 100% efficient, after mechanical repair, bearing replacement, shaft regeneration - ready to work. Possibility of performing tests on site.

Condition: good (used), A wide belt sander from the HolzHer brand is for sale. The machine works perfectly and can be inspected on site. Please see machine data in picture 5. Unfortunately, the rear brush is a bit worn. There is also a whole range of sanding belts. The price is gross, i.e. €2500.00 net. An invoice will be issued for the machine. Ceb Hblevwm Eietzogt Shipping the machine is of course no problem for an additional charge. If you have any questions or are interested, please get in touch! Your JG Holztechnik team

Condition: excellent (used), Year of construction: 2008, Wide Belt Sander DMC Technosand K Cgeb Hbltsv Nxfrozet Technical Data: Working Width: 1350 mm Number of Sanding Units: 2 Feed Speed: Adjustable, 4–16 m/min Workpiece Thickness: 3 to 160 mm

Condition: excellent (used), Year of construction: 2004, working width: 1,250 mm, working height: 160 mm, For sale Viet Valeria 3 CCT 1350 Sup and Viet Valeria 3C INF 1350 top-bottom grinding line · Max. working width: 1250 mm · Max. working height: 160 mm · Upper belt dimensions 1400x3250 mm, lower belt dimensions 1400x2620 mm The upper and lower control units include: · steel shaft - 45 kw with a diameter of 320 mm, · rubber shaft 30 kw, · grinding pad/pneumatic shoe 16 kw. Line control using Siemens touch panels. Heavy Duty line - designed for long-term and intensive use. Cgsbjwbp N Rs Hbltzot 100% efficient line ready to work. Full documentation available for inspection. The line is connected. It is possible to test it.

Condition: good (used), Year of construction: 1987, Working width 1100 mm Number of sanding units 1 st. Cgsb Hblevnwcmotzst Workpiece thickness max. 150 mm sanding belt measurements mm Motor roller 11 kW Motor pad kW Feed motor 1,5 kW Feed speed m/min. Overall size mm Weight 2250 kg

Condition: excellent (used), COSTA LEVIGATORS Series S model SN 5-groups first group electronic sectioned transverse belt second group 1 roller third group 1 roller Cgobjr Iyvmj Hbltzot fourth group electronic sectioned pad super finisher fifth group electronic sectioned transverse belt machine width 1350 vacuum inverter on all belt groups inverter on belt outfeed brush group blower group on outlet

Condition: good (used), Year of construction: 2007, Functionality: fully functional, COSTA belt and brush grinder SA 1 TLFT3 FT3 1350 Manufacturer Costa Levigatrici Italy Year of manufacture 2007 S/N A70420 LL1 4 units Total power 27 kW Csb Hbev Hcdyoltzegt Weight: 4200 Kg CE marked The machine body is solidly built to be vibration-free and has a fixed working height, i.e. the machine is a line machine. The feed table is precision-machined and specially ground to be perfectly flat. The thickness adjustment is done via the machine's control panel (located on the front wall of the machine) with a control switch. A fine adjustment switch and a digital measuring display with an accuracy of 0.1 mm help with precise adjustment. The thickness of the work is monitored by an emergency stop bar on the front of the machine, which stops the machine (and raises the units) if the piece being sanded is too thick. The sanding belt length of the machines is 2,620 mm (low sanding belt cost and long life). Technical specifications: - Working width: 1,350 mm - the length of the sanding belt 2,620 mm - sanding belt width 1320-1380 mm 1. Electronically controlled, divided segment step unit TP-32 Number of segment sections 42 pieces (width 32 mm / segment) 2.Belt JET BLOWER - cleaning of the blowing nozzles Inverter motor, power 11 kW, belt speed 1-16 m / sec The reading bar on the front of the machine is divided by 32 mm mechanical segment preload with sole graphite wear compensation The segment sanding shoe TP-32 is an electronically controlled and divided pneumatic segment sanding unit. In the device, the sanding pressure is evenly distributed over the entire sanding piece and the pressure can be adjusted from the machine control panel The segment control ensures the feeds taking into account the front and rear ends of the workpieces as well as both workpiece edges. The width of the segment unit is 32 mm and the width of the beam segment of the rail is 32 mm. The sanding mat can be quickly pulled out of the device for cleaning and maintenance. The COSTA segment sanding shoe requires minimal maintenance. The length of the sanding belt is 2620 mm and the motor power can be selected when ordering. The device has a safety brake and pneumatic sanding belt tension. The oscillation of the sanding belt is controlled automatically. The height adjustment of the saddle unit is done manually using an accurate micrometer scale. The hardness of the segment unit can be adjusted precisely to the respective task using the sanding pressure. 3. XLS cross brush sanding unit including 61 sanding boards (H50 x L80), Inverter controlled, 2.2 kW, 0.5-3 m/sec. Cutting speed - grinds the edges and grooves of the workpiece from right to left and from left to right relative to the feed direction FRT-330-SLIPCON/FLEXTRIM – brush grinding unit D 330 mm brush grinding unit with replaceable brushes - drive device 2.2 kW inverter motor 0-400 1/min 4. FRT-330-SLIPCON/FLEXTRIM – brush grinding unit D 330 mm brush grinding unit with replaceable brushes - drive device 2.2 kW inverter motor 0-400 1/min

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment Cgsb Hbltegr Er Sezst spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: not inspected (used), Year of construction: 2006, Wide belt sander Cgeb Hbltsulxdcozjt Grinding width: 1300 mm Manufacturer: Heesemann Model: LSM 8 Year of production: 2006 Technical condition: used, for technical inspection

Condition: excellent (used), Independent Machine, Top machine Max working width mm 1350 Working height (thickness) mm 3 - 130 Built-in electric and command panel Electronic Programmer PCM (software Costa Sanding Manager) Feeding speed (adjustable) 4 - 24 m/min No. 1 Vacuum unit (power Kw 11) Pressure "shoes" to allow the process of short workpieces Air blowers on the abrasive papers Total power installed KW 69 No. 7 Working groups: 1°) Cross belt TR7, pad with No. 84 sectors (TPR16) (Kw 15, with inverter) 3-16 m/sec 2°) Cross unit XLS (for trimming), with N° 122 abrasive elements (Kw 1,5, with inverter) 3°) Longitudinal unit FTR-3, roller (diam. mm 330) Kw 2,2 with inverter, 40 Sh (3-20 m/sec) 4°) Longitudinal belt TP16, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 5°) Longitudinal belt TP16 Super-finisher SF/3250, pads with sectors N° 84 / Kw 15 inverter 3-16 m/sec 6°) Scotch-Brite SB180 (Kw 1,5) diam. mm 180 7°) Rotary air-jet blowers for the panels cleaning SR Cjb Hbltsgx Hnhszogt

Condition: excellent (used), Year of construction: 2010, Brushing sander DMC MASTERBRUSH 1350 RDBB Working width 1350 mm Electronic control Hydra V-Pad 10.4” plc 8.4.8 Worktop with fixed height of 900 mm Min and max workable thickness 8-200 mm Perforated table and belt 11 Kw electric fan with silencer Carpet advancement with 2.2 kw inverter 40 Sh conveyor belt Rear roller towing the carpet covered in rubber Automatic carpet centering Roller conveyors with two rollers at the entrance and exit Cgsb Hbltsu Nf A Uozjt Rubberized pressure rollers at the entrance and exit of the operating groups 1 position Sanding roller group diameter 320 mm Sh 30 pneumatic on/off Oscillating blowers 11 Kw motor driven by inverter 2 positions Orbital group with rotating disc brushes 19 discs rotary with a diameter of 125 mm Main motor 1.1 kw driven by inverter Independent motor orbital movement driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 3 position Helical brush roller group diameter 310 mm Opposite rotation to the advance 4 kw motor driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 4 position Helical brush roller group diameter 310 mm Opposite rotation to the advance 4 kw motor driven by inverter Set of 150 grit abrasive strips Set of tampico abrasive strips 5 position Satin roller diameter 200 mm 2.2 kw motor

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) Cgsb Hblevdtxistzst 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: excellent (used), Year of construction: 2020, operating hours: 350 h, Functionality: fully functional, The wide belt sander DMC EUROSYSTEM by SCM for calibrating and sanding is flexible because of its modular design and many configurations. Technical specifications (2020) working width: 1350 mm MACHINE COMPOSITION: C.E. EUROPEAN SAFETY EXECUTION 1 dmc eurosystem M2 1350 1 PM170 Lifting unit for "mobile" working table 1 BL 32 Infeed panels reading bar for 'epics' sectioned pads pitch 32 mm 1 Volt 400 EU 1 Cgjb Hbsup Sqqeltzst Frequency 50 Hz 1 P.C. LANGUAGE ENGLISH 1 INFEEDING WORKING UNITS 1 TA-5000 Front cross pad unit 1 PE 32T 'EPICS' sectioned electronic sanding pad 1 Motorized rotating blower 1 Motor driven by inverter, power up to 15 kW 1 FIRST POSITION 1 R 250-2620 Operating unit for roller diameter 250 mm 1 RA grooved steel roller 1 Timed oscillating cleaning blower 1 15 kW motor 1 SECOND POSITION 1 S-2620 Operating unit for superfinishing pad 1 PE 32/L 'EPICS' sectioned electronic sanding pad pitch 32 mm 1 Timed oscillating cleaning blower 1 OUTFEEDING WORKING POSITION 1 SB/U Oscillating working unit for abrasive cloth coated roller diameter 200 mm 1 SB 200 UFC Abrasive cloth coated roller diameter 200 mm ' Ultra Fine' type with silicon carbide fibers 1 Carbon fibres bar 1 Punched work-top and conveyor belt preset for vacuum device (for 2 internal working stations) 1 Vacuum motor powered by inverter up to 4 kW integrated in the machine frame 1 Rubber coated belt conveyor 60 Sh 1 Front supporting worktop equipped with five idle rollers 1 Rear supporting worktop equipped with five idle rollers 1 2,2 kW feed belt motor driven by inverter 1 Vision panel door positioned on the service side for machine equipped with 2 working units 1 Internal LED lighting 1

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 - Brushing device: Brush roller diameter 150 mm - Drive for brush-off device (kW): 1.5 - Transport bed: 3.0 kW FU 4.0 kW - Feed speed (m/min.): 5 - 25 - Workpiece conveyor belt suction clamping system (kW): 7.5 Cgeb Hbljtt Slcjtzst - Total weight (kg): approx. 7500 - Total power connection (kW): approx. 73

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0422300345, working width: 1,350 mm, grinding height: 160 mm, working height: 900 mm, conveyor belt speed: 333 mm/s, grinding belt length: 2,620 mm, TECHNICAL DETAILS Operating side: left Working width: 1,350 mm Workpiece thickness: 3-160 mm Belt speed: 4-20 m/min Rollers: 2 steel rollers and 1 rubber roller Rollers and motors 1st motor power: 37 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 2nd motor power: 30 kW, steel contact roller Ø 240 mm, sanding belt 1,370 x 2,620 mm 3. motor power: 22 kW, rubber contact roller Ø 240 mm, 70 Shore, sanding belt 1,370 x 2,620 mm Transport motor: 7 kW with inverter Brush motor: 0.75 kW Vacuum fan motor: 7.5 kW Extraction Dust extraction requirement: 13,490 m³/h Display and control Display: 10" touchscreen Program memory: 1,024 Resolution: 640 x 480 pixels MACHINE DETAILS Length of the machine: 2,970 mm Csb Hjukq I Rebltzegt Width of the machine: 2,050 mm Height of the machine: min. 2,255 mm - max. 2,415 mm Working height: 900 mm Amperage: 200 A Voltage: 400 V SCCR: 18 kA, 50 Hz Total connected load: 105 kW Max. Air pressure: 8 bar EQUIPMENT Equipped with 2 steel and 1 rubber roller

Condition: new, Type R-RP1300 Cjb Hodflqajbltzsgt Working width 1300 mm Min. working length 500 mm Working thickness 3-200 mm Feeding speed 0-30/min Total motor power 30,37 kW Motor for first unit 15 kW Motor for second unit 11 kW Dust cleaning brush 0,37 kW Feeding motor 4 kW Lifting motor 0,37 kW Diameter of first roller 240 mm Diameter of second 210 mm Abrasive belt size 1330x2200 mm Working air pressure 0,6mpa Volume of dust collection device 9600 m3/h Transport dimensions 2700x2100x2400mm Weight 3300kg

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 26476, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 7,500 kg, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,000 mm, workpiece height (max.): 200 mm, grinding belt width: 1,350 mm, power of feed motor: 2,200 W, input voltage: 400 V, frequency: 50 Hz, workpiece width (max.): 1,350 mm, Five-belt calibration and fine grinding system, top and bottom grinding for solid wood or wood materials Cgeb Hjvy Dt Nebltzot Factory overhauled to the latest standard 5 sanding units (2x calibration roller top / bottom + cross sanding unit, 2x segment sanding pads, 1 of which includes a unique diagonal sanding unit (patented KÜNDIG Brilliant technology)), as well as the KÜNDIG Enormatic control for automatic workpiece feeding. Machine completely overhauled - for more information see appendix

Condition: used, Year of construction: 2004, - Cutting width (mm): 1300 - Workpiece thickness max. (mm): 3 -140 Longitudinal sanding units: - Longitudinal sanding unit 1: Sanding belt speed 24 m/s Cgsbstt Sb Tj Hbltzjt - Longitudinal sanding unit 2: Sanding belt speed 24 m/s - Longitudinal sanding unit 3: Sanding belt speed 24 m/s - Longitudinal sanding unit 4: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 5: Sanding belt speed 10 + 20 m/s - Longitudinal sanding unit 1: Motor power 55 kW - Longitudinal sanding unit 2: Motor power 55 kW - Longitudinal sanding unit 3: Motor power 45 kW - Longitudinal sanding unit 4: Motor power 18 / 21.5 kW - Longitudinal sanding unit 5: Motor power 18 / 21.5 kW - Brushing unit: Brush roller diameter 150 mm - Drive for brushing unit (kW): 1.5 - Transport bed: 11 kW FU 22 kW - Feed speed (m/min.): 5 - 25 - Workpiece suction unit (kW): 15 - Total weight (kg): 12800 - Total power connection (kW): approx. 245

Year of construction: 1997, Condition: good (used), - Working width (mm): 1300 - CSD system Cjb Hboidi Iveltzegt - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit - Ionization