Used Wood shredder for sale (380)

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included working width 350 mm Motor rotor 30 kw Cgjb Esk Twl Toxp Tkot

Condition: excellent (used), Year of construction: 1999, operating hours: 730 h, Functionality: fully functional, power: 15 kW (20.39 HP), Schuko single-shaft chipper in perfect condition! Ceb Ejwfubmoxp Tkjgt Operating hours approx. 730

Condition: used, Year of construction: 2014, operating hours: 1,400 h, tire size: 650/55-26.5, Used JENZ 360 wood schredder - incl. Veenhuis tipping trailer - year 2014 Ceb Expev Egbgj Tksgt - 1400 h - dimension tipping part: 4000 x 2000 x 2000 mm

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Cebsv Npf As Exp Tkjgt Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Cgsb Ejgw Sxzoxp Tket Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Functionality: fully functional, Very sturdy RE screening machine/vibrating screen. Cgob Expov Tn Hgo Tkjt Channel length: 8.0 m. Total length: 9.0 m. Screening zone: 1000 x 5700 mm. Screen perforation: 8 mm. Reinforced triple eccentric drive with 7.5 kW motor. The screen was overhauled two years before dismantling. A completely new eccentric drive and vibrating elements were installed at that time. A second screen deck can also be installed.

Condition: good (used), Year of construction: 1993, Low-speed rotor with push floor 800 mm rotor width Cob Exjhrmzvop Tkjgt

Condition: new, Year of construction: 2025, Compacto's 40x40x23mm hollow-ground cutting crowns are suitable for many shredding machines from Weima, Gross, and Votecs. Our cutting crowns are characterized by their special manufacturing in an electronically controlled, special hardening facility. The cutting crowns are manufactured in Germany. They impress with their robust workmanship and high durability and performance. Advantages: • Reduced risk of breakage through the use of special materials and adaptation of the hardness to the customer's material Cjb Eewcmk Ijxp Tkogt • Longer service life thanks to an optimized hardness of 52 to 59 HRC • A lower hardness is used for shredding materials with a metal content to reduce the risk of breakage • Perfect fit thanks to precise machining • Short delivery times thanks to high inventory levels • Highest quality at fair prices As a manufacturer of single-shaft shredders, compacto also supplies blades suitable for shredders from other manufacturers such as Amis, Reinbold, Weima, Gross, Votecs, Mewa, Mawera, mütek, Osmeka, RSN, Zeno, Zerma, Zerbrik, or Untha. Manufacturing other blades according to drawings or supplied samples is also possible.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, EXHIBITION MACHINE new Due to the special shape of the rotor, the highest efficiency is achieved with comparatively low motor power (11kw). Specially designed for: * Hardwood * softwood * chipboard * and all products similar to wood - most modern technology-robust quality - space-saving construction - powerful with low connected load - special cutting rotor for maximum throughput - multiple usable cutting tools - tooth plate made of special steel - 2000 hours warranty on the high performance gear - exchangeable screens with different hole sizes - intelligent SPS control system with interfering material cut-off (incl. 5m cable) Cgjb Exjb Dwk Nep Tkst dimensions 1.150x1.130x1.930 mm

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, power: 11 kW (14.96 HP), Untha LR 520 wood chipper Year of manufacture 12/2023, exhibition machine 35 operating hours Cjb Expsvw T Uwe Tkjgt

Condition: excellent (used), Year of construction: 2002, Residual wood shredder / chipper Year of construction 10/ 2002 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Csb Expoqxbc Ds Tkogt Profile rotor with 14 round knives Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 15.0 kW CE Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg NEW CUTTING BLADES NEW ROTOR BEARINGS NEW ROTOR BLOCKS NEW SLIDER GUIDES NEW V-RIEMS NEW GEAR OIL Automatic star-delta start-up Switch cabinet with PLC control and 5 meter cable harness Automatic shutdown when hopper is empty Safety package with gearbox limit switch Vibration-damping machine feet Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data: Hopper opening : 600 x 800 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of blades: concave / 40 x 40 mm, reversible cutting crowns concave / 30 x 30 mm, broaching knives Sieve perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Power supply: 400 V +/- 5 % / 50 Hz Included: Switch cabinet (Rittal) incl. 5 m cable Electrical control unit (Moeller / Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Gear limit switch 1st row of blades Cgjb Esvymdwsxp Tket Hold-down device on the pusher for long and large parts Special broaching blade to prevent lateral jamming Weight: 1100 kg Availability: short term Storage location: Hochheim

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed Cjbsu Rl Rus Exp Tksgt no vibrating chute included

Condition: repair required (used), Year of construction: 2008, DEVICE MODEL SKORPION 650 EB Dimensions (length x width x height) [mm] 3000 x 1620 x 1400 (+600)* Weight [kg] 4555kg 4 cutting + 1 supporting Inlet dimensions (width x height) [mm] 650 x 250 Cutting drum diameter [mm] 600 Cutting drum speed [rpm] 500 (3.4 knives on the drum) Cgob Exswhb U Ejp Tkjt Feeding method belt conveyor Main engine power [kW] 110 Feeding motor power [kW] 2 pcs. x 4.0 Engine power at the receiving conveyor [kW] 2.2

Condition: excellent (used), power: 18.5 kW (25.15 HP), overall weight: 1,200 kg, Single-shaft shredder with load controlled ram - driven by hydraulic. V-rotor specially developed by Weima Automatical switch-off, when empty TECHNICAL DATAS: Hopper opening .....600x800 mm Rotor diameter.....252 mm Rotor length.....600 mm Cob Exowf Rvmep Tkjgt Rotor speed ..... 90 rpm Drive power..... 18,5 kW Number of knives..... 14 pcs Knive size..... 40x40 mm Screen holes..... 20/15 mm Exhaust connection..... 160 mm Length of the machine..... 2045 mm Width of the machine..... 1190 mm Height of the machine ..... 1640 mm Weight..... 1200 kg

Condition: new, Year of construction: 2025, Functionality: fully functional, power: 18.5 kW (25.15 HP), Untha LR 700 single-shaft chipper, new Drive power: 18.5 kW Hydraulic drive power: 1.1 kW Rotor diameter: 300 mm Rotor speed: 98 rpm Number of indexable inserts: 19 Filling opening: 700 x 1065 mm Extraction nozzle diameter: 200 mm Required extraction speed: 28 m/s Recommended pipe cross-section: 200 mm Weight: approx. 1800 kg Workplace-specific Sound pressure level LPA 1 m: 82 dB(A) Diameter of perforated screen: 15 - 40 mm Throughput*: up to 6 srm/h (depending on material properties and perforated screen diameter) Applications - Hard and soft wood - OSB - Particleboard - MDF - Veneers - Cross-cut wood - Reliable and economical cutting system - Unique indexable insert geometry Cgjbeu Id Ugo Exp Tkst - Low-wear perforated screen - Powerful and low-wear swivel slide - Energy-efficient and trouble-free drive concept

Condition: new, Year of construction: 2024, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Cob Exp Tehbdg Ujkegt Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Model: PHT 140 400 vibrating trough A metal detector Height: 140 Cgsb Eov A Tzbjxp Tkjt Width: 440 Power: 30kW

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Motor 18.5 kw Cjb Esu Rl Sfoxp Tkjgt frequency-controlled for variable speed without vibrating chute

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 3 h, Functionality: fully functional, machine/vehicle number: 237042, power: 25 kW (33.99 HP), overall weight: 1,575 kg, fuel type: electric, color: yellow, From my own experience: The battery lasts a whole working day without any problems when continuously charged Internal number: M1241 Manufacturer: Schliesing Vehicle type: trailer chassis Drive type: electric Log diameter: Ø 20 Feed width (mm): 240 Engine power: 25 kW - torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Own weight (KG): 1575 Equipment: Power Control System - whisper-cut shredding system The Schliesing mid-range is now also available as an electric shredder - the Schliesing 325MX-E shredder. The powerful brushless asynchronous motor with an output of 25 kW and a torque of 120 Nm ensures productive work with the usual pulling power. The batteries are designed to enable a full working day without charging. The 325MX-E enables emission-free chipping with low noise levels and offers uncompromising productivity for logs up to 20 cm in diameter. Engine and chassis: Brushless asynchronous motor with 25 kW and a torque of 120 Nm Fully galvanized, corrosion-resistant single-axle chassis for 80 km/h including EU homologation Robust, solid and widened sheet steel mudguards Solid support wheel at the front and parking support at the rear Towing device with overrun brake and soft dock ball coupling or DIN towing eye LED lighting in accordance with StVZO (impact-protected) Pneumatic tires 205/65 R15 C Battery: LEP battery (lithium iron phosphate) with a capacity of 300 Ah at 96 V Allows the chipper to be used for a full working day without charging. No recharging required during long downtimes Energy recovery through recuperation of the kinetic energy of the chipping disc during the work process Charging connection: protective contact plug 220-240V/16A Charging time for full charge: 8 hours Guarantee for 1000 charging cycles at 80% SOH (State of Health) Cgsb Eevmz N Usxp Tkjt Housing/hopper/blow-out pipe: Foldable intake hopper with at least 1,500 mm input depth Fully galvanized, corrosion-resistant hopper flap Funnel dimensions (inside): width = 1,040 mm, height = 960 mm Pivoting blow-out pipe with adjustable spreading flap Blow-out pipe on ball bearing slewing ring Relevant machine parts with sound insulation (especially chipper hood and blow-out pipe) Two emergency stop buttons on top of the hopper and on the side of the hopper flap Chipping mechanism: Chipping mechanism with safety circuit according to EN 13525 Robust chipping disc Ø 655 mm, 35 mm thick Closed blade system for quick, safe and precise blade changes Continuously adjustable chipping blades Chipping blades can be resharpened multiple times for a long service life (approx. 10x) Horizontally usable counter blade and vertically usable counter blade, each 2-fold for a long service life Winding protection on the main bearing of the chipping disc Hydraulic feed: Feed control with its own hydraulic circuit PowerGrip feed roller, 240 mm wide, with hydraulic feed. Particularly grippy, aggressive and even feed thanks to one oil motor per roller Parallel-guided top roller for regular and even feed to prevent jamming of the fed material Hydraulically adjustable feed speed and thus the wood chip size Fill level indicator for hydraulic oil tank OPTION OVERVIEW: The Whisper Cut® V-shaped blades feed the wood more evenly and with less vibration In combination with the centering PowerGrip roller, the chopped material hardly swings back and forth

Condition: used, Year of construction: 2007, No. 04468 Single-shaft shredder ZENO ZTLL 800 x 1000 Used, year of construction 2007 3200 operating hours This chipper is used for shredding wood, paper, plastic, residual waste, etc. Inlet cross-section 800 x 1000 mm Hole diameter in screen 25 mm Rotor diameter 300 mm Number of knives 20 Drive motor 15 kW Soft start control CE-compliant Transport dimensions 1500 x 960 x 1500 mm LWH Weight approx. 1700 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Ceb Expsv Rpvwe Tkogt Terms of delivery: ex warehouse or location

Condition: new, Year of construction: 2025, Drum chipper series ATH S&F chippers and drum chippers with horizontal infeed are used in many areas of the wood processing industry (sawmills, timber mills). Chippers from the ‘ATH’ series produce high-quality and homogeneous wood chips with a low proportion of fines from residual wood, for example as quality chips for the cellulose industry or as fuel chips for energy generation ATH 220 series - Feed height: 200 mm - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 4 pieces - Number of counter knives: 2 pieces - Rotor diameter:520 mm - Number of feed rollers: 3 pieces - Throughput: up to approx. 40 rm/h * - Chipping length: 5 - 50 mm - Chipper drive power: 22 - 110 kW - Drive power feed rollers: 2 x 2.2 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 2,800 - 4,000 kg ATH 330 series - Feed height: 300 mm Cobeuz Hmxo Exp Tkjgt - Feed width: 500 | 700 | 1000 mm - Number of chipper knives: 2 - 6 pieces - Number of counter knives: 2 pieces - Rotor diameter: 700 mm - Number of feed rollers: 3 pieces - Throughput capacity: up to approx. 70 rm/h * - Chipping length: 5 - 80 mm - Chipper drive power: 37 - 250 kW - Drive power feed rollers: 2 x 3.0 kW - Operating/control voltage: 400/220 V, 50 Hz - Weight: 3,500 - 5,000 kg *depending on chipper length, kW main motor, number of knives, feed Advantages: - Maximum throughput - Low fines content - Low maintenance - Flexible use - Customised production

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Cgeb Exp Tjhq T Udsket Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Solid main bearings compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 170 h, Functionality: fully functional, machine/vehicle number: MKS20728, power: 36.8 kW (50.03 HP), overall weight: 560 kg, color: yellow, Technical data: TYPE Schliesing 175MX LOGS: Up to Ø 16 cm FEEDING WIDTH 24 cm DRIVE POWER 18–36.8 kW / 25–50 HP WEIGHT approx. 560 kg 3-point rear attachment (540 rpm) Operating hours: approx. 170 Logs up to 16 cm Feeding width 240 mm Basic weight approx. 550 kg Recommended drive power: 18–36.8 kW (25–50 HP) Cardan shaft with freewheel. Properties: Drive and attachment: Wood chipper with PTO drive. 3-point rear attachment with an operating speed of 540 rpm. Recommended drive power from 18 to 36.8 kW (25 to 50 HP). PTO shaft with freewheel for safe operation. Fully galvanized, light and solid base frame for stability and durability. Housing/hopper/blow-out pipe: Foldable intake hopper with a minimum input depth of 1,500 mm. Hopper dimensions (inside): width = 890 mm, height = 720 mm. Fully galvanized, light and stable base frame for optimal support. Pivoting blow-out pipe with adjustable spreading flap for precise blowing. Noise insulation on relevant machine parts such as the chipper hood and the blow-out pipe. Two control units (right and left) and three emergency stop buttons for increased safety. Chipping mechanism: Safety circuit in accordance with EN 13525. Chipping disc with a diameter of Ø 655 mm and a thickness of 30 mm. Closed blade system for quick, safe and precise blade changes. 2-blade chipping disc with continuously adjustable blades. Chipping knives can be resharpened multiple times for a long service life. Horizontal counter knife and vertical counter blade can each be used twice for a long service life. Winding protection on the main bearing of the chipping disc. Hydraulic feed: Cgjb Ejvmz Rxsxp Tkst Feed control with its own hydraulic circuit. PowerGrip feed roller (240 mm wide) with hydraulic feed for easy and even material transport. Parallel guidance of the top roller for even feed without jamming. Hydraulic adjustable feed speed to control the wood chip size.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 26 h, Functionality: fully functional, machine/vehicle number: 227057, power: 18.5 kW (25.15 HP), fuel type: diesel, color: yellow, Technical data: Type: 235 MX Logs: Up to 19 cm in diameter Operating hours: Approx. 15 Year of manufacture: 2022 M 1182 Fixed chipper housing Intake width: 240 mm Basic weight: approx. 1,370 kg Equipped with normal cut and power control system Engine power: 18.5 kW (25.2 HP), EU-V 4-cylinder Kubota Stage V diesel engine Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake, support wheel at the front, parking support at the rear Lighting in accordance with StVZO (impact-protected) Features: Logs up to Ø 19 cm: The 235 MX-D is a powerful bush wood chipper that eats through logs with a diameter of up to 19 cm. Intake width 24 cm: With an intake width of 24 cm, the chipper enables efficient chipping of wood. Robust construction: The chipper is robustly built and offers a long service life even under demanding conditions in gardening and landscaping. Engine and chassis: Water-cooled Stage V 4-cylinder Kubota diesel engine: With 18.5 kW (25.2 HP), the engine offers the necessary power for efficient work. Industrial freewheel clutch: Automatically acts between the engine and chipping disc to protect the engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis: For a speed of up to 80 km/h with EU homologation. Housing/hopper/blow-out pipe: Foldable intake hopper: With a minimum input depth of 1,500 mm for easy handling. Fully galvanized, corrosion-resistant hopper flap: For a long service life and reliable operation. Chipping mechanism: Chipping disc Ø 655 mm, 35 mm thick: With a closed knife system for quick, safe and precise knife changes. Continuously adjustable chipping knives: For individual adaptation to requirements. Cgeb Expjvmz Spo Tkot Hydraulic feed: Feed control with its own hydraulic circuit: For precise control of the feed. PowerGrip feed roller: With hydraulic feed for a grippy, aggressive and even feed. Safety: Complies with the safety regulations of DIN-EN 13525: For safe operation and compliance with the relevant standards.