Used wood shredder for sale (344)

Condition: like new (used), - made in Germany - new knives and counter-knives TECHNICAL PARAMETERS: - feeding dimension 520x1000 mm - motor power 80 kW - four rows of knives - counter knife Isdpfeqy Ek Hox Ah Ujik - sieve 20 x 20 mm - sieve dimension 1000 x 900 mm - rotor diameter 600 mm - rotation of shaft 830 rpm Overall dimensions of the machine 235x170x290 cm weight ~ 4000 kg

Condition: excellent (used), Year of construction: 2007, operating hours: 9,300 h, functionality: fully functional, Shredder Doppstadt DW3060 Year of manufacture: 2007 Ijdpfx Ahjx Ap Aqe Uoik Magnet over the conveyor belt. Operating hours: 9300 mth Price: 59,000 EUR

Condition: as good as new (ex-display), Year of construction: 2024, Special price for our demonstration machine Another machine, available now (ex works in Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of leftover wood and also pallet sections. The pallet would need to be prepared with a jigsaw or chainsaw so that it fits vertically into the hopper - see Figure 2. Ideally, it would be approximately 40x20x20 cm so that the wood can lie flat on the slider floor. This is where the machine works most effectively. A hydraulic slider runs at the bottom of the shredder, which pushes the wood against the rotor depending on the load. The material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour *depending on the screen and how well the material is prepared. *Conveyor belt and overhead magnet available at an additional cost. + Powerful 18.5 kW motor, + Concave blades, + Large high-performance gearbox, + Special, load-dependent slide control, Customs tariff number: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Iiodpfxodwktks Ah Ujk Blades: 15, multi-rotatable Option: double row of blades + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutter opening: 630 x 820 mm Filling volume: approx. 0.6 m³ Hydraulic slide gate Screen perforation of your choice (10 - 30 mm) Suction nozzle diameter: 160 mm Weight: approx. 1,300 kg (depending on accessories) Dimensions (L x W x H): approx. 1,737 x 1,167 x 1,650 mm Moisture content: 30% dry Included as standard: - V-rotor for maximum throughput - Control cabinet with Siemens PLC control - Automatic star/delta start-up - Fast hydraulics - Auto. OFF when the rotor is idling - Speed 70-90 rpm for high throughput - Cyclic control to avoid idle times - Performance-enhancing step control of the hydraulic slide - Pertinax guides for the hydraulic slide - Vibration-damping machine feet - CE compliant. - MADE IN GERMANY . Shredder options: - Raise shredder by 30 cm (prepared for conveyor belt) +€2,080 net - Articulated conveyor belt +€8,770 net Horizontal section: 1,200 mm Rising section: 2,500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2,000 mm + - 100 mm - Overbelt magnet +€5,980 net - Conveyor belt and overbelt magnet control +€2,750 net (Start and stop synchronized with the shredder) - Extend hopper +€940 net - Eco-rings: +€1,980 net (recommended for more than 15% hardwood) - Special scraper +€990 net (recommended for veneer or paper) - Double Knife series + €995 net . Raw material requirements: - The moisture content (dry) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: excellent (used), Year of construction: 2022, Shredder . 800 x 480 Iiedpfxstznxuo Ah Usk Contact only serious interest !! gearbox 11kw 7400Nm + 2x 5200 eur

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, overall weight: 10 kg, color: blue, operation weight: 10 kg, maximum load weight: 10 kg, empty load weight: 10 kg, Hello, Isdpsx H Ii Hjfx Ah Ujik I am offering for sale a shredding line, entirely manufactured by OSKA. The line was produced in 2010 and was refurbished by the manufacturer in 2021. The line consists of: - Infeed table - 32 m long vibratory trough - OKRR 550 chipper - 20 m redler conveyor with three lockable discharge chutes - New chain for the redler - Complete control system - Full documentation - Four sets of knives Price: 289,000 PLN

Condition: good (used), Year of construction: 1998, Shredder with 1 m rotor width, ideal for pallets. Rotor diameter 300 mm with 24 knives. 22 kW motor. Equipped with discharge auger. Extraction connection 250 mm. Screen perforation 25 mm. Isdoxzpzdjpfx Ah Uoik

Condition: new, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 Iedpjhbdg Uofx Ah Ueik ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2023, operating hours: 1,800 h, functionality: fully functional, Doppstad AK 640/K Year of manufacture: 2023 1800 operating hours First owner Spraying system Magnetic separator Price: €425,000.00 Iedpfx Ahsx Apzae Uoik Leasing available until 09/2028, can be taken over.

Condition: new, Year of construction: 2025, production time appr. 4 months * for suction perception, see picture 4 and 5 Tariff number: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 ph including turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3ph Knife: 76 pieces, rotatable Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Iodpfx Ahod Hkqhs Ueik Control: PLC Siemens S7-1200 Funnel opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 square meters hydraulically operated slide Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (lxwxh) approx. 2765 x 2520 x 1730 mm Turbo coupling Included as standard: - V-rotor for other throughput - 2nd row of knives on the rotor - Control cabinet with Siemens PLC control - automatic star / delta start - fast hydraulics - Automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - Clock control to avoid idle times - Performance-increasing step control of the hydraulic slide - Pertinax guides for hydraulic slides - anti-vibration machine feet - CE conformity The shredder is for shredding natural wood, chipboard and MDF board other materials after testing and approval by the manufacturer Recognition from the raw material: - The moisture content (atro) must be below 30% - Metals and mineral impurities such as sand, stones, etc. Interests to interests wear

Condition: ready for operation (used), functionality: fully functional, loading space width: 1,400 mm, loading space length: 2,900 mm, total length: 6,600 mm, total width: 2,150 mm, total height: 2,550 mm, TECHNICAL DETAILS Loading area length: 2,900 mm Loading area width: 1,400 mm Isdsxw U Hqopfx Ah Usik Cutting shaft: 1 MACHINE DETAILS Total installed power: 48 kW Cutting shaft motor power: 37 kW Dimensions (L x W x H): 6,600 x 2,150 x 2,550 mm

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 5020, power: 45 kW (61.18 HP), Stationary wood chipper with 45 kW electric motor. The Hackkontrol HC 960 control system was replaced two years ago. This control regulates feed-in when the speed drops and can be adjusted as needed. The wiring in the connection box was also overhauled two years ago, so the chipper can be connected using a cable with a minimum of 100 Ah, preferably 125 Ah, and can be put into operation directly. The chipper is robustly constructed and fully operational. Machine documentation is available and spare parts are still readily obtainable. Iedpsxy Rrzjfx Ah Usik

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor Iedpfx Ajp H Sv Djh Ueik 20 knives on rotor 25 mm concave There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: ready for operation (used), functionality: fully functional, Schutte-Buffalo 1590 – hammer mill, 132 kW motor For sale: Schutte-Buffalo hammer mill, model 1590. Complete machine with start-up system and extraction ventilation. Designed for wood shredding (other materials negotiable), robust industrial construction. Configuration / Equipment Installed motor: 132 kW, 1500 rpm Control cabinet: star–delta start-up Extraction fan (included): 30 kW Option to install 150 kW motor – engine available optionally for buyer Additional knives/hammers as replacements – included Technical data Weight: 3580 kg Rotor width: 910 mm Iiedpfx Ahex Hgxaj Ujk Shaft diameter: 30 mm Knives/hammers: 90 mm Output: approx. 9 m³/h of dry timber (approx. 10% moisture), softwood

Condition: good (used), Year of construction: 1978, Selling out sawmill factory! Chipper with opening 650 x 160 mm. With infeed rollers Iisdpophpq Tefx Ah Uok Motor 75 kw In set 2 screens: 40 x 40 mm - chips 10 x 10 mm - saw dust New knives in set. Very good condition, checked.

Condition: new, Year of construction: 2023, The ideal machine for shredding hardwood and softwood Another machine, available immediately (ex works Neckartailfingen) . Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Knives: 14+2 pieces, 40x40mm, multiple rotatable, Rotor diameter: 260 mm, Control: Omron SPS, Cutting unit opening 600 x 800 mm, hopper volume approx. 0.6 qbm, hydraulically operated pusher Screen perforation of your choice (12 - 40 mm) Iedod E R D Sjpfx Ah Ujik Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm . The following options are available at extra cost: - Additional row of knives + 995 € net (28 instead of 14) - Surcharge for 4-sided segment shelf + € 2,170 net (prevents blocking of the pusher. Recommended for materials with a thickness of less than 3 mm) - Raise shredder by 30 cm (preparation for conveyor belt) + € 1,980 net - Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overbelt magnet + € 5,980 net - Conveyor belt and overbelt magnet control + € 2,750 net (start and stop synchronized with the chipper) - Special bearing +1,540 € (rarely required. Closed, even more stable rotor bearing. Possibly a consideration for sieves smaller than 15 mm or with a lot of fines. Not necessary if the bearings are lubricated with grease every approx. 2 weeks during operation) . Requirements for the raw material: - The moisture content (atro) must be below 30 % - Metals and mineral impurities such as sand, stones etc. lead to increased wear. . We will be happy to carry out a free test with your material and invite you to visit us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: used, Year of construction: 2014, functionality: fully functional, Single-shaft machine. Dimensions of the feed hopper: 1300 x 1400 mm. Hydraulic pusher with adjustable pressure and speed, depending on the power consumption of the rotating drum. Isdpfxex Anq Ho Ah Uoik Drive via gear motor with V-belt. Robust rotor made of certified construction steel. Rotor width: 1300 mm. Hopper length: 1400 mm. Rotor diameter: 368 mm. Main motor power: 30 kW. Teeth and counter-blades made from wear-resistant material. Replaceable reversible blades. Dimensions of reversible blades: 40x40x20 mm. Replaceable screen basket. Total weight: approx. 3,100 kg. Supply voltage: 380 V – 50 Hz.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, machine/vehicle number: SH12005, Untha LR 630 Chipper Operating Hours: 1 h Demonstration Machine Ma. No. SH12005, Year 2024 Item Number: JA_G250303 Description Feed Opening: 624 x 792 mm Hopper Capacity: 0.43 m3 Rotor Diameter: 248 mm Speed: 98 rpm Power: 400V/50 Hz, 18.5 kW Blades: 17 Screen Hole: 15-20 mm Suction Nozzle: 160 mm Weight: Approx. 1300 kg Dimensions (W x D x H): 1740 x 1220 x 1670 mm Cable Harness: 3 m + Connection for Screw Discharge Subject to errors and changes in technical specifications. Ijdpev Tbqlofx Ah Ujik Note for new machines: • Prices are for pickup (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany - Free shipping! (unless otherwise stated) • Subject to prior sale! • You will receive an invoice with VAT shown. • The buyer is free to inspect the items at the location. • Our general terms and conditions apply. • Special agreements are only possible in writing. • Any items in the background of the image are not included in the scope of delivery. • Saw blades are for illustrative purposes only and are not included in the scope of delivery. Shipping options: • We would be happy to provide you with a transport quote. • Pickup from our location in Ottendorf-Okrilla, free of charge upon request. (Assembly and instruction of the goods for demonstration purposes is optionally available upon request!) • Optionally, our trained service staff will assemble the machine at your location and provide you with a brief instruction. Travel, driving, and service times are subject to an additional charge.

Condition: excellent (used), Weima WL4 shredder, year: 2022, in excellent condition Iiedpfsxyxchsx Ah Usk

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WAG 200 LK04, overall weight: 4,000 kg, fuel type: electric, color: red, REINBOLD 1400 – German Shaft (Rotor) Shredder For sale: Reinbold 1400 shaft shredder (German manufacture). Machine for shredding wood and wood waste, robust construction, weight approx. 4 t. Technical specifications Main motor: 30 kW Hydraulic pump: 4 kW Working width of rotor: 136 cm Rotor diameter: 25 cm Loading hopper – top dimensions (L x W): 257 x 190 cm Loading hopper – bottom dimensions (L x W): 100 x 136 cm Isdpfx Asx Hgiroh Uoik Chip discharge: Ø 250 mm Equipment Screens included: Ø 12 mm and Ø 16 mm

Condition: good (used), functionality: fully functional, Möller Hacker / impact shredder / secondary shredder. Infeed width 835 mm. Infeed opening 310 mm. Rotor diameter 500 mm. 72 hammers. Screen perforation 16 mm. Drive motor 30 kW. Hopper with angled feed or top feed. Insensitive to foreign objects. Iijdoxl Uiuspfx Ah Ujk Ideal for waste in sawmill basements.

Year of construction: 2022, operating hours: 20 h, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm Iedpfx Ajf N Nk Hjh Uoik • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Condition: good (used), Year of construction: 1996, 4-shaft shredder from renowned manufacturer Untha, type RS 30 2 x 7.5 kW Ijdpfexpn Hnex Ah Usik Function tested

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, Disc chipper with 2 knives. Tractor PTO driven. Iisdpfx Ahex Dzdie Uok

Condition: ready for operation (used), Year of construction: 2017, Brand: Votecs Model: EZ6-1 Machine no.: 03/17/47 Year of manufacture: 2017 Iiodsxvc N Rspfx Ah Usk 18.5 kW

Condition: ready for operation (used), Year of construction: 2004, Brand: Reinbold Model: AZR600 Year of manufacture: 2004 Iiedpfxoxvc I Te Ah Usk 18.5 kW New knives, new sieve