Used wood shredder for sale (298)

Condition: used, Untha LR700 shredder Hjdpfx Asyt Htpepnjfg 18.5 kW motor, rotor length: 700 mm, 21 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, Knives in good condition.

Condition: used, Year of construction: 2022, operating hours: 300 h, functionality: fully functional, power: 100.03 kW (136.00 HP), overall weight: 5,500 kg, fuel type: diesel, The BBT 400 Woodzilla is a 360° rotatable, compact, powerful, mobile drum chipper with aggressive feed, mounted on a truck trailer chassis. Technical Data Year of manufacture: 2022 Operating hours: approx. 300 hrs Drive: Diesel, Deutz TCD 3.6, 100 kW (136 HP), Stage 5 Feed opening: 320 x 500 mm Chipping drum: 400 x 500 mm, 4 knives Hodpfx Apjx Ektxsnjfg Max log diameter: 32 cm Infeed table length: 1300 mm Support: 4-way hydraulic Z-Crane Ben-Tele 550 2 additional feed rollers Radio remote control for chipper and crane Trailer towing eye: 40 mm Brake: Air brake system, Duomatic 2 additional feed rollers The machine is in like-new condition. Location: NRW Availability: by arrangement Warranty: The machine is sold in the condition it is in at the time of handover. The seller assumes no liability for defects. We reserve the right to prior sale, modifications and repairs. Didn't find what you're looking for? Then contact us!

Condition: excellent (used), Year of construction: 2000, Diemer residual wood shear ASC 65 - 25 Infeed dimensions 650mm x 250mm with infeed vibrating trough Hfjdpfxswu Nwnj Apnog

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Hfedjxr Tp Hjpfx Apneg

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Hfjdpfxowu Nwhs Apnsg Hopper inlet 2.26 m x 1.65 m

Condition: used, Year of construction: 2006, Bruks drum chipper Model 820CM Hsdpfx Apoxr Trnsnsfg Year of manufacture: 2006

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW Hfsdpfxsx Tp U Re Apnog - good condition - available immediately

Condition: excellent (used), Wood chipper Mario Ferrari L4T2N 400x120 - Italian production - year of production 1992 TECHNICAL PARAMETERS: - inlet width 400 mm - inlet height 120 mm - engine power 45 kW - autoreverse Hfodpfxolwqgas Apnog - upper pulling toothed shaft - two lower pulling toothed shafts - conveyor belt 2500 mm - two knives - rotor diameter 400 mm - rotor width 400 mm - power of feed motors 2 x 1.1 kW Transport dimensions 250x170x150 cm weight ~ 1500 kg

Condition: used, functionality: fully functional, – German-made – with belt feeder – autoreverse Hfsdpfjwtzr Uox Apneg TECHNICAL SPECIFICATIONS: – feed opening width: 400 mm – feed opening height: 120 mm – main motor: 30 kW – number of knives: 4 pcs. – rotor diameter: 420 mm – rotor length: 420 mm – screen: 30 x 30 mm – upper driven toothed shaft: 1.1 kW – lower driven toothed shaft: 1.1 kW – feeder length: 1700 mm – feeder width: 410 mm – autoreverse – transport dimensions (L/W/H): 360 x 140 x 120 cm – weight: ~1500 kg

Condition: good (used), Year of construction: 2010, functionality: fully functional, Goliath Shark 60 chipper Hsdot U Aaaopfx Apnjfg - year of manufacture 2010 - manufactured in Germany - new set of knives and counter-knife TECHNICAL PARAMETERS: - rotor width 600 mm - engine power 18.5 kW - number of knives 30 pieces - lace knife 30x30 - height of drawer 170 mm - diameter of screen 12 and 15 mm - autoreverse - dimension of hopper 600x830 mm - spigot diameter 160 mm Transport dimensions 180x130x170 cm weight ~ 1300 kg

Year of construction: 1995, condition: like new (used), Vecoplan VTH/55/15/2 edging chipper – German production – autoreverse – for the production of technological chips – year of manufacture 1995 TECHNICAL PARAMETERS: inlet width 550 mm inlet height 130 mm two knives engine power 55 kW conveyor belt length 4300 mm sieve 50 x 50 mm Hedpfjkth N Nox Apnsfg toothed upper pulling shaft toothed lower pulling shaft rotor width 560 mm rotor diameter 560 mm hydraulic lifting of the feed shaft transport dimensions (length / width / height) 550 / 230 / 120 cm weight ~ 3000 kg

Condition: excellent (used), Chipper KLOCKNER HZM 1/400x100 with vibrochute – German production – year of production 1992 – six pulling rollers – autoreverse Hsdpfxeiwi H Re Apnjfg TECHNICAL PARAMETERS: inlet width 400 mm inlet height 100 mm engine power 30 kW sieve 50 x 60 mm feed motor power 2 x 4 kW vibrochute 4900 mm two knives rotor diameter 400 mm autoreverse three top pulling toothed shafts three lower pulling toothed shafts transport dimensions (length/width/height) 500 / 230 / 150 cm weight 2500 kg

Condition: used, functionality: fully functional, Klockner chipper 120x400 H-2WT - German production - shafts in very good condition TECHNICAL PARAMETERS: inlet width 400 mm inlet height 120 mm two knives rotor diameter 420 mm power of main motor 30 kW feed motor power 2 x 2,2 kW bottom shaft pulling toothed top pulling toothed shaft Hfsdpfx Apethfm Uenjg sieve fi 20 mm feeder length 2600 mm transport dimensions (length / width / height) 300 / 245 / 170 cm weight 1500 kg

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition Hodpfx Aer Ak Rgjpnofg – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: excellent (used), Year of construction: 2011, JUNKKARI HJ250 chipper – hydraulic feeder – Finnish production – year of manufacture 2011 TECHNICAL PARAMETERS: Hodpfxsitcupo Apnefg hydraulic feeder / number of shafts 2 adjustable feed speed max element diameter 250 mm rotor diameter 900 mm rotor speed 540-1000 rpm roll width 300 number of knives 2 chip size adjustable 5-18 mm capacity 7-20 m3/h power requirement of 90 hp discharge chute rotated 360° knife length 300 mm reverse dimensions (length / width / height) 210 / 170 / 190 cm weight ~ 650 kg

Condition: good (used), Chipper Klockner 120x400 L2 / 1W - German production - DTR TECHNICAL SPECIFICATIONS: width 400 mm height 120 mm rotor diameter 430 mm rotor length 430 mm two knives Hfedpfxohfmure Apneg sieve 60 x 60 mm engine power 37 kW engine power 2 x 2.2 kW two lower toothed shafts top toothed shaft feeder length 4900 mm chute the wood chips with a sieve transport dimensions (length / width / height) 850/245/220 cm weight ~ 2500 kg

Condition: excellent (used), Vecoplan chipper for saw cuts Hacker 55/26/2 - German production - reverse - for the production of technological chips - a powerful shaft with a diameter of 650 mm TECHNICAL PARAMETERS: - 550 mm slot width - inlet height 260 mm - two knives - engine power 110 kW - conveyor belt length 5000 mm - 50 x 50 mm sieve - three upper pulling toothed shafts - four lower pulling toothed shafts Hfedpfx Apjihpg Eoneg - rotor width 650 mm - rotor diameter 650 mm - hydraulic lifting of the feed rollers - feeder height from the base 1100 mm Transport dimensions 1100x245x240 cm weight about 10 t

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: UNTHA 1, power: 22 kW (29.91 HP), Untha RS 30 4S – Year of manufacture 1992 Cable shredder, pre-shredder, chip shredder, two-shaft shredder, rotary shear, rotary knives, chip shredder Hfjdpoyhzwcjfx Apneg Power: 400V, 22kW with pump station, with control system Includes 5m long screw conveyor and inclined belt conveyor Ideal for pre-shredding cables (including plug ends), plastics, metals, wood, etc. Very robust motor and gearbox Very good condition Collection by appointment only in 75053 Gondelsheim Shipping via freight company possible, please provide postal code for inquiry

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Feed opening: 600 x 800 mm Hopper capacity: 0.6 m³ Hjdpfx Aoxavtdopnjfg V-rotor Rotor diameter: 252 mm Rotor working width: 600 mm Rotor speed: 60 – 100 rpm Cutting system: 28 knives 40 x 40 mm Screen perforation: 15/20 mm Control: electronic via PLC Control cabinet: fully wired, incl. 5 m cable Motor power: 18.5 kW Connection voltage: 400 V +/- 5% / 50 Hz Extraction nozzle diameter: 160 mm Dimensions approx.: L = 1,800 mm, W = 1,230 mm, H = 1,640 mm Weight: approx. 1,300 kg Includes: Automatic star-delta starter Automatic shut-off in idle mode Vibration-damping machine feet CE compliant Availability: short-term Location: Flörsheim

Year of construction: 2024, condition: new, - 150 mm infeed high - 430 mm infeed width - 30 mm chips - 2 knives - 440mm diameter Rotor - 590 U/min Rotor Hfedpfx Aeful Uispneg - 30 m/min Feed speed - 37 KW Mainmotor - 3 KW + 2,2 KW infeed roller Gearboxes - 6.000 mm conveyor belt - 2.000 mm discharge conveyor belt

Year of construction: 2024, condition: new, - Chopping height 240 mm - chopping width 540 mm - chopping length approx. 25-35 mm - Number of chopping knives 2 - rotor diameter 600 mm - rotor speed 590 rpm - feed motors 4 + 3 KW - main motor 45 KW / 55KW / 75 KW - 6.000 mm infeed conveyor belt - 2.000 mm conveyor belt underneath the machine Hfjdpjnyidbefx Apnsg

Condition: like new (used), engine power 18.5 kW feed hopper press drawer 2 cm screen Hedpfeyw Hxzsx Apnsfg year 2011 380 V

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Main motor: 37 kW Hsdpsyi Uqzefx Apnefg Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: excellent (used), Bark shredder HBS 1260 Type: 1260-32-EU / n= 324 Hjdsxmld Sspfx Apnsfg Model 1260 Capacity: 75-100 m³/h Power requirement: 110-132 kW RPM: 1045 rpm Weight: 2400 kg Chips, dust, and bark conveyors with bark shredder Chips, dust and bark conveyors (several different ones) Manufacturer Tähkä Year of purchase 1996-2005

Condition: new, Year of construction: 2026, CORMAK RPL380 Firewood Processor (Saw–Splitter Machine) Key features and functions: Performance: Efficient operation with capacity of up to 8 m³ of wood per hour, depending on wood type. Multifunctionality: Combines a chainsaw, log splitter, and conveyor belt in one machine, increasing efficiency and saving time. Versatility: Suitable for both professionals and individual users; capable of processing various types of wood. Engine: 15 HP petrol engine delivers high power for efficient cutting and splitting. Time-saving: Wood processing time is significantly reduced thanks to the integration of three functions in one unit. Reliability: Designed for use in sawmills, the wood industry, and for firewood or construction wood production. Equipment: Features a STIHL chainsaw guide bar and an oil tank located at the rear of the housing. Precision: Cross wedge enables effective splitting, while cutting can be performed to the desired length. Adjustment: Wedge height can be easily adjusted to match log diameter using a lever. Safety: Built-in safety systems protect the operator. Mobility: Equipped with wheels and a tow hitch for easy transport between work sites. Conveyor system: The belt feeds wood into the splitter and then carries away split logs. It can be folded in half and positioned vertically. Certifications: CE certified and supplied with full technical documentation (DTR). Powerful 24L hydraulic system drives: ✅ Feed conveyor ✅ Cutting saw ✅ Splitting cylinder with up to 20 tons of force ✅ Output conveyor The machine is equipped with a 9-stage adjustable splitting wedge, allowing logs of different diameters to be split into 2 or 4 pieces. ✅ Adjustable cutting length ✅ Log holding clamp ✅ Central chain lubrication system Technical Specifications Engine Model: Lancin G420F Power: 9.0 kW (15 HP) Displacement: 420 cc Fuel: Petrol Fuel tank capacity: 5.4 L Starting system: Electric / manual (recoil) Recommended engine oil: 15W40 (1.7 L) Hydraulic System Hydraulic oil tank capacity: 24 L Recommended hydraulic oil: HL46 / HL32 Performance & Cutting Parameters Max splitting force: 20 t Splitting wedge: 4-way Max log diameter: 380 mm Min / max cutting length: 190–600 mm Chainsaw bar length: 18” (45 cm) Capacity: approx. 8 m³/h Hfedpoyw I Epsfx Apnjg Feed Conveyor Length / height: 1000 mm / 910 mm Dimensions (L × W): 1040 × 254 mm Max incline angle: 40° Output Conveyor Dimensions (L × W): 3200 × 254 mm Speed: 27 m/min Wheels & Tires Size: 135/70R12 Pressure: 2.5 bar Dimensions & Weight Machine dimensions: 6600 × 1380 × 2000 mm Weight: 680 kg