Tool and Cutter Grinder

ADELBERT HAAS Multigrind HT

Condition: good (used), Year of construction: 2005, operating hours: 114,129 h, functionality: fully functional, machine/vehicle number: 2820, Control: Siemens Sinumerik Software: Haas Software 7.3 Number of axes: 6 (X, X3, Y, Z, C, A) Grinding spindle: - Infinitely variable up to 8,000 rpm - Haas short taper - Grinding wheel diameter max. Ø200 mm Workpiece spindle: - Up to 1,000 rpm - Center height 175 mm - Collet 3409 - SK50 tool taper - Through hole Ø28.5 mm - Workpiece weight up to 2.5 kg - Indexing accuracy +/- 3.5 angular seconds - Input increment 0.001° Workpiece support: Linear axis X3 with bushing holder Feed drives: - Linear axes with ball screw spindles - Direct position measurement with resolution 0.0001 mm Workpiece dimensions (drills): - Ø 0.8 - 15.0 mm - Overall length 20 - 380 mm - Grinding length 10 - 360 mm - Workpiece weight max. 2.5 kg Chain magazine: - 42 stations - Ø 0.8 - 15.0 mm - Length 80 - 250 mm - Workpiece weight max. 1.5 kg Stack magazine: - Suitable for stack magazine for indexable inserts CCD area camera measuring system: - Tool indexing and positioning by cooling channel (from Ø 0.8 mm) - Measurement of opening angle - Indexing of multi-flute drilling and reaming tools Iedpfxowpqkrj Ah Uebf Renishaw probe: - Touching off workpiece length / tool tip - Scanning flute lead angle - Positioning in a coolant hole at the tool tip Electrical connection: - 63A pre-fuse - Supply voltage 400 V - Frequency 50 Hz - Control voltage 24 V - Rated power 21 kW Weight: 8 t Incl.: - Control cabinet cooling: water-water heat exchanger - Fire protection system: Kraft and Bauer extinguishing system - Extraction: Büchel Smog-Hog SH 2000/T - Dressing unit (stationary dresser) - Workpiece retainer ----- Operating procedure for drills: - Manual loading of the chain magazine outside the machine enclosure - Workpiece feeding by automatic handling system - Workpiece clamping by automatic collet chuck - Positioning of workpieces in the working area - Workpiece machining - Automatic return of the workpieces on a driven discharge conveyor Operating procedure for solid carbide indexable inserts: - Manual loading of the stack magazine in the working area - Workpiece feeding by automatic handling system - Automatic clamping using special clamping device - Positioning of workpieces in the working area - Workpiece machining - Automatic return of finished workpieces to the storage system Drill grinding: - Grinding flute profile - Grinding point - Grinding outer contour - Grinding relief - Grinding circumferential margin - Cylindrical grinding Indexable insert grinding: - Grinding seating surface and pin ----- There are two additional identical machines for sale!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss CNC coordinate measuring machine Prismo VAST GOLD with rotary table Year of manufacture: 1999 Retrofit 2013 Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm Technically and visually in very good condition Features and equipment: C98 control system with BP26_SE control panel VAST GOLD sensor system 13-position stylus change magazine Stylus change plate Stylus accessories Calibration sphere Reference probe Workstation with monitor Calypso Basic 5.2 software Iodpfx Aovdtzdeh Usbf Upgrade to the current Calypso version and additional options possible Complete retrofit with C99 and the current Calypso version possible Available at short notice

Condition: excellent (used), functionality: fully functional, rotary table diameter: 600 mm, grinding height: 300 mm, disc diameter: 400 mm, grinding diameter: 600 mm, Manufacturer: ELB-SCHLIFF Model: SWR 50 T Completely overhauled: 2008 Ibodpfou Ed Nlex Ah Usf Delivery time: immediate Grinding area: Ø 600 x 300 mm Grinding wheels: max. Ø 400 x 100 x 127 mm Spindle taper: 60 mm Installation dimensions: approx. 2800 x 2800 x 2300 mm (L/W/H) Total weight: approx. 5000 kg Control system: Siemens PLC

Condition: excellent (used), Year of construction: 2016, Takisawa TMM 250 3 turn-mill center, year 2016, Fanuc turning length:1300 Turning diameter: 350 mm Spindle speed (max.): 4000 1/min 9 axes 2 x spindles 2 x C-axis Swing diameter 780 mm Ibedpsrt Ip Nofx Ah Usf Turning diameter max. 350 mm Turning length max. 1,300 mm Chuck diameter left 250 mm Chuck diameter right 200 mm Upper tool carrier with Y-axis 260 mm and B-axis 230° / +/- 115° Complete with 30-position tool changer Lower tool carrier 15-position turret - all positions driven Complete simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool positions Workpiece magazine, to the right of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle 20 bar Due to high office costs (customs regulations) we do not deliver to Turkey Turkey, Iran, Russia and Belarus.

Condition: new, Year of construction: 2023, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 760 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece weight (max.): 12,000 kg, total height: 48,500 mm, total length: 85,800 mm, total width: 56,000 mm, table width: 2,400 mm, table length: 3,020 mm, overall weight: 20 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 6,000 rpm, distance table center to spindle nose: 960 mm, spindle nose: ISO 50, tool length: 350 mm, tool diameter: 127 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gantry vertical machining centre "AWEA LP-3025" with HEIDENHAIN TNC 640 Ibedpfx Asrl Svrsh Uef

Condition: used, Year of construction: 2023, In the market for a Top of the Range Miyano? Then have a look at this one! 18 months old and just over 1000 hours on the clock…it is as new! Still on site where it can be seen under power. The following is from Miyano’s Spec sheet: The Miyano ABX-64SYY – is a Top of the range, twin spindle, twin turrets with Y-axis on each turret. The ability to machine simultaneously at the left and right spindles using the upper and lower turrets, both featuring a Y-axis function, means that complete front and back machining of products with complex shapes can be accomplished simply and in a short time. High rigidity and high torque with 40 Nm driven tools. The use of rigid 40 Nm driven tool drives capable of heavy cutting ensures stable milling. Two turrets with a total of 24 tool positions, all driven, handle complex machining just like a machining centre. This machine also features the optional parts conveyor, Hainbuch collet chucks on both spindles, high pressure coolant, probing and a steady rest that’s mounted on the lower turret. Machining Capacity and Chuck System Maximum Machining Diameter of Bar Work SP1/SP2 ø64/51mm Collet Chuck SP1/SP2 Stationary Power Chuck SP1/SP2 6″/6″ hydraulic drive Standard Turning Length 125mm Spindle Spindle Nose SP1/SP2 A2-8/A2-6 Spindle motor(30min./Cont.) SP1 15/11kW SP2 7.5/5.5kW Spindle Speed Range SP1 50 – 5,000min-1 40 – 4,000min-1 SP2 50 – 5,000min-1 Turrets(Upper L/R Turrets & Lower Turret) Type of Turret 2 x 12 Station Turret Shank Height of Square Turning Tool □20mm Diameter of Drill Shank ø40mm ø20mm ø25mm Slide Stroke X1, X2 axis 190mm Z1/Z2 axis 550mm/721mm Y1, Y2 axis ±40mm Zs axis 756mm Rapid Traverse Rate X1, X2 axis 16m/min Z1/Z2 axis 30/20m/min Y1, Y2 axis 12m/min Zs axis 30m/min Driven Tools Maximum Number of Revolving Tools 24 Rotation speed of Driven Tools 60 – 6,000min-1 Driven Tool Motor AC Servo 4.5kW Machine Dimensions Machine Height 2,222mm Floor Space 3,290×2,204mm Machine Weight 10,900kg Name of the machine: Miyano ABX-64SYY Ibsdpew I D Dujfx Ah Ujf

Condition: ready for operation (used), Year of construction: 2019, Travel X/Y/Z: 1530mm/530mm/465mm, spindle speed: 12000rpm, spindle power: 22kW, spindle torque: 120Nm, tool holder: SK40, tool positions: 54, rotary table diameter: 630mm, max. table load: 500kg, rapid traverse: 30m/min. Documentation available. On-site inspection is possible. Isdewm Npnopfx Ah Uebf

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : SK50 - Spindle power : 60 [kW] - Spindle speeds : 50-8000 [rpm] - Gearbox - Speed ranges : 2 LINEAR AXES - Travels on X/Y/Z axes : 1250 / 1200 / 1400 [mm] - Rapid traverses rates (X/Y/Z) : 50 [m/min] A ROTARY AXIS - Travel : [°] - Indexing precision : 0.001 [°] B ROTARY AXIS - Travel : (+/-) 360 [°] - Indexing precision : 0.001 [°] - Cutting feed rate : 10 [rpm] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 50 - Tool exchange time : 6.3 [sec] TABLE - Table dimensions : 1100 [mm] - Maximum weight upon table : 2000 [kg] - Maximum part dimensions (diameter x height) : 1810 x 1400 [mm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 50 [kW] WEIGHT & DIMENSIONS - Machine floor space : 7400 X 5400 [mm] - Machine height : 4800 [mm] MACHINE HOURS - Number of hours under power : 14238 [h] EQUIPMENT - CNC : Siemens 840 D SL - Interface : Ethernet / RS232 / USB / PCMCIA - Interactive programming : Shopmill - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank : 2450 [l] * with high-pressure pump : 50 [bars] * with cooling unit for coolant * with magnetic filter * With washing gun - Coolant through spindle - Micro-lubrification coolant Iedpfx Ajuhb D Ajh Uebf - Chips conveyor - Oil mist extractor - Spindle cooling unit - Tool probe : Renishaw - Workpiece probe : Renishaw - Tool breakage detection - Electric transformer - Tool-holders

Condition: used, Year of construction: 2001, Control SIEMENS table surface area 160 mm Ibodpfx Ajudc S Teh Uef weight of the machine ca. 10 t

Condition: reconditioned (used), functionality: fully functional, No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Ijdpfx Ahstvfhco Ujbf Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.