Wire EDM machine

AGIE Excellence 2F eCut

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Hedpfsw Ucyujx Addsng Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, overall weight: 980 kg, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Hnodpsu E U Hbjfx Addjg Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle The Z-axis support column is made of silicon carbide, which increases rigidity. DC servo motors, air bearings on all axes, free-floating linear scales with 0.1 µm resolution.

Condition: excellent (used), Year of construction: 2011, travel distance X-axis: 560 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, nominal power (apparent): 30 kVA, torque: 163 Nm, table load: 400 kg, rotary table diameter: 400 mm, rotational speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 48, tool length: 300 mm, tool diameter: 70 mm, tool weight: 10 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Technical characteristics: Hnedpfx Aeuw Sq Ujddog CNC OSP P 200 Chip conveyor 48 tools Continuous table 360,000 pos. 15,000 rpm BT 40 Cooling through spindle 20 Bar Presetting on board table Shower work area washing system P.S. The machine has always worked in full oil Teflon material

Condition: like new (used), Year of construction: 2001, Retrofitted: 2024 Numerical control: HEIDENHAIN TNC426 Technical features Dimensions Table dimensions: 3500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1200 mmZ axis traverse: 1000 mm Milling head Head type: Universal manual long face (UL40)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrate: 2 - 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 20000 kgMachine dimensions approx.: 7900 x 4670 x 2900 mm Accesories External high pressure through spindle coolantElectronic handwheel: HR-130Guarding Sales conditions Warranty: 6 months mechanical partsSale price (Ex Work): On request View all technical features Hodpfx Adjugbq Tjdjng

Condition: used, Year of construction: 2019, Wire EDM Machine Manufacturer: Mitsubishi Electric Model: MV1200S NewGen Year of manufacture: 2019 Operating hours: approx. 9,500 Control: M800 D-CUBES Mitsubishi Electric control system Hybrid construction Travel paths X/Y/Z: 400 x 300 x 220 mm Travel paths U/V: 120 x 120 mm Max. workpiece dimensions: 810 x 700 x 215 mm Max. workpiece weight: 500 kg ODS – Optical Drive System Tubular direct drives in the X/Y axes Linear scales in X/Y axes Intelligent AT – Automatic wire threading Hnsdpfxoxpfy Ss Addjg For wire diameters 0.10 – 0.3 mm Automatic small-hole detection function 5 controlled axes – Prepared for additional axes PFC – Precise Finish Circuit LLS – Long Life System 10 kg wire station Wire alignment block Wire chopper Compressor cooler tä161225

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,050 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 16 m/min, rapid traverse Z-axis: 16 m/min, controller model: OKUMA-OSP-HMI, table width: 850 mm, table length: 2,200 mm, table load: 2,500 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 10,000 rpm, coolant supply: 15 bar, distance table center to spindle nose: 950 mm, spindle motor power: 22 W, spindle nose: BT 50, number of spindles: 36, number of slots in tool magazine: 36, tool length: 400 mm, tool diameter: 120 mm, tool weight: 20 g, input voltage: 400 V, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA-OSP-HMI 3-Axis Vertical Machining Center with CNC Hnodpfeu Dinkox Addeg

Year of construction: 2011, condition: ready for operation (used), Horizontal machining center with 5-axis Fanuc CNC, tilting table with 120° and continuous B-axis. Hodpfeku A A Hex Addeng Pallet magazine with 10 stations, automatic tool changer with 199 stations. Accessories included with the machine: Chip conveyor, high pressure coolant system through the spindle line with separate tank and paper filter.

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Hnjdpewuurwefx Addsg Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, GF MachiningSolutions CUT E350 Year of manufacture: 2017 Control: AC CUT HMI Travel distances (X/Y/Z): 350 x 250 x 250 mm Travel distances (U/V): +/- 45 mm Taper: +/- 30° at 77 mm height Workpiece dimensions: 820 x 680 x 250 mm Max. workpiece weight: 400 kg Collision protection on X/Y/Z axes Best surface finish on carbide/steel: 0.12/0.18 µm Maximum cutting speed: 300 mm²/min Overall dimensions: 1750 x 2470 x 2200 mm Total weight: 2525 kg The machine is cleaned, overhauled, and tested by us after receiving your order. We are happy to perform a test cut tailored to your needs. Optional services: - Commissioning and training - Transport Hnedoxbzimepfx Addjg - Warranty - Cooling unit

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium CNC Control Hodew D Accjpfx Addong Travel (X / Y / Z): 550 x 350 x 400 mm Travel (U / V): 550 x 350 mm Max. taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatically lowering work tank (drop-door) Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Dimensions of complete system: 2600 x 2600 x 2340 mm Total weight of system: 3300 kg The machine is cleaned, completely overhauled and tested for all functions after order confirmation. You receive a 6-month warranty on the machine. Commissioning service is available upon request.