Sliding table saw

Altendorf F45 3 Achs

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Godpoxtbtpofx Ah Noir Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X M64300 Front support roller M99008 Template holder

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill Gsdpfxjwka S Io Ah Nsir - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Condition: Function tested Equipment and technical data: Max. edge thickness: 20 mm Max. edge height: 51 mm Max. thickness of coil material: 3 mm Gedew I U E Aepfx Ah Neir Min. workpiece length: 140 mm Min. workpiece width: 60 mm Glue system: 1906 cartridge Pressure unit Milling unit 1920 for flush milling up to 20 mm and chamfer milling Required space (LxWxH): 3150x1800x1375 mm Weight approx.: 800 kg Location: Flörsheim Availability: Short-term

Condition: used, Year of construction: 2000, With electric height and tilt adjustment Used, excellent condition, little used Make Altendorf Gisdpsvxlq Hsfx Ah Njr Type F45 Year of manufacture 2000 Machine number GS-tested Motor 4 kW Steel guides Carriage length approx. 3000 mm Cutting width approx. 1050 mm Pivoting up to 45° Prepared for scoring unit Parallelogram guard Tabletop extension Anodized aluminum parts Electric height adjustment Electric tilt adjustment Digital display: - Cutting angle - Speed Extraction connection D 120/80 mm Space required approx. 3010 mm x 1800 mm x 1500 mm Weight approx. 1000 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2014, Table saw manufactured in 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and a maximum saw blade diameter of 550 mm. The machine includes a swivel-mounted control panel at eye level and a rip fence for precision cutting. If you are looking to get high-quality cutting capabilities, consider the Altendorf F45 table saw we have for sale. Contact us for more information. • Sliding table length: 3000 mm • Cutting width: 1300 mm • Max saw blade diameter: max. 550 mm • Main motor power: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB Gijdoywk H Aopfx Ah Nor • Operating voltage: 400 V • Frequency: 50 Hz • Current: 11.5 A • Phases: 3 • Control panel: swivel mounted at eye level • Scoring unit preparation: yes • Rip fence: included • Rip Fence Type: Manual adjustment on hard-chromed round bar • Rip Fence Display: DIGIT X (Electronic digital thickness display) Additional equipment • AKE clamping system • Table extension: 840 mm • Angle mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm Gsdsx Hbruepfx Ah Njir - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Gjdpfx Ahev Erkas Noir Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: used, Panel Saw Martin T 60 German quality product Heavy-duty precision panel saw 5.7" touchscreen axis positioning control Swiveling control panel above the table Saw blade tiltable 0 - 46° Motorized blade tilt and height adjustment Automatic scoring unit Motor 5.5 kW Saw blade diameter up to 400 mm Rip fence table length 3000 mm Cutting width with parallel fence 1250 mm Parallelogram cross table, tiltable to both sides up to 46°, LCD displays, 0.01° fine adjustment for cutting angle Width fence adjustment from the front using handwheel on precision guides Width fence reading via touchscreen CE certified Machine is WORKSHOP TESTED and in TOP CONDITION Gedpfx Aoyuvqgsh Nsir Available ex-stock Lieboch

Condition: good (used), Year of construction: 2003, Tilting panel saw Altendorf F45 with ELMO IV-plus package, 2-axis scorer, 3m table, and Control-Plus control Sliding table length: 3000 mm Saw blade tilting from 0 to 45 degrees Speeds: 3000, 4000, 5000, and 6000 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Control panel at eye level with Control-Plus control 4-axis CNC controlled Cutting of chain measurements and grooves on the rip fence and crosscut fence Cutting width correction on the rip fence and crosscut fence with tilted saw blade 600 cutting programs Calculator function with direct transfer of results to the respective axis Tool management Saw blade diameter up to 450 mm Max. cutting height: 150 mm Cutting width up to 1040 mm, electrically adjustable Tilting angle and height adjustment electrically adjustable Crosscut fence rail up to approx. 3210 mm, electrically adjustable, automatic coupling of the second stop flap for large dimensions Folding rip fence Extraction outlets: 120 + 80 mm Sliding carriage lockable Additional mitre fence rail 2 used saw blades and one scorer blade 2 riving knives 2-axis scoring unit, electrically adjustable during operation 2 blade guards 3 emergency stop switches Clipboard at the control panel CE marking Machine shows signs of wear. No cuts in the sliding table. Original paint (special paint finish), partially repainted in some areas. Machine has 18,985 operating hours. It originates from a furniture factory and has been regularly serviced and well-maintained. Condition as per original photos. A video of the machine in operation can be provided upon request. Approx. dimensions: 3150 x 3750 x 1900 mm (L x W x H). Weight approx. 1400 kg. Godpfxsxw Ii Se Ah Noir The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this seller".

Condition: excellent (used), Altendorf F45 Panel Saw Sliding table length: 3200 mm Cutting width to the right: 1300 mm Scoring unit Max cutting height: 120 mm Electric adjustment of saw blade tilt up to 45° Electric lifting and lowering of the worktable Main motor power: 5.5 kW Scoring motor: 0.75 kW Gjdsxc Et Sspfx Ah Nsir Saw blade speed variable via belt: 3000/4000/5000 rpm Max saw blade diameter: 400 mm CE certificate