Circular sawing machines

Altendorf

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Ndedpfx Aeg S Nx Dsh Ujf Working table dimensions 400 x 760 mm Feed speed 7 m / min Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 96123, Connected load 380V 46A planing width 180 mm planing height 120 mm length of table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds electric height adjustment 4x star-delta switch 2x low pressure holder 1x side pressure holder Njdjh U Db Iepfx Ah Usdf 2x steel feed shafts 1x rubberized pull-out roller Suction connection 4x120 mm

Condition: reconditioned (used), Year of construction: 1986, cutting length (max.): 2,800 mm, cutting width (max.): 800 mm, cutting width at rip fence: 800 mm, main saw diameter: 450 mm, M.-No. 86-1-224, year built 1986, connected load 380V 5.5kW, trimming carriage length 2800 mm, cutting width 800 mm, hydraulic height and tilt adjustment, scoring unit, star-delta switch, parallelogram safety device with narrow and wide hood, angle stop, mitre stop, parallel fence, table extension 800 x 400 mm Nsdpfxowrb U Tj Ah Uodf

Condition: new, machine/vehicle number: NEW-1, empty load weight: 585 kg, maximum load weight: 2,115 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, Year of construction: 2024, HOLIDAY PROMOTION: Up to 15% discount on accessories such as leaf grates, electric tipping controls, and integrated rails. New Series Rear Tipper! Tandem axle, braked rear tipper high loader with aluminium drop sides, foldable and removable on all sides, wooden floor with steel sheet cover, welded, hot-dip galvanized steel frame, automatic jockey wheel, six lashing rings on the sides in a V-groove, 13-pin electrical system with reversing lights, hydraulic hand pump, low chassis. Plus shipping to Gera and vehicle registration certificate: €200 Nedpfx Aheghpdie Uedf Optional accessories available at extra cost: electric operation, leaf grates, tarpaulin and frame, 100 km/h equipment, etc. Delivery available at extra charge! Financing/leasing available Images are for illustration purposes only!!

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Ndedovvi Ttopfx Ah Ujf Storage location: Nattheim

Condition: reconditioned (used), Heavy-duty surface planer Solid German engineering Finely planed machine tables, total table length 3000 mm Table adjustment with ball bearings Chip removal system with micrometer gauge Adjustment for hollow and pointed edges with scale display Dressing fence in heavy cast iron design - 45 degree swivel and height adjustable Machine completely rewired Automatic star-delta start Motor protection switch Motor brake Emergency stop switch CE Njdpfx Asvi H Nfoh Usdf Blade shaft with 4 strip blades Cutter head diameter 120 mm Planing width: 410 mm, Working table length: 3,000 mm, Cutterblock speed: 5,000 rpm, Motor 400 V, 4.0 kW, 50 Hz Weight approx. : 1050 kg Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm Nedpfxstwz Tlo Ah Uedf incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1480x580x1120 mm Ndedpfsvz E Drex Ah Uef Weight 280 kg Total power requirement 2,2 kw

Condition: good (used), Year of construction: 1990, cutting width (max.): 1,000 mm, cutting height (max.): 140 mm, table length: 1,400 mm, power: 5.5 kW (7.48 HP), Types:F 45 ,Machine nr:90-8-86 Ndjdpfetxh Nisx Ah Uof

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 74-4-10, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Ndodpfx Ahjipvrbe Ujf Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change