Pillar Drilling Machine

ALZMETALL AB 4 SV

Condition: used, Column drilling machine - Capacity: 40 mm Gjdox Ttunspfx Abdjil - Morse taper 4 - Automatic feed - Variable spindle speed: 50-1280 rpm - Spindle stroke: 180 mm - Table: 720x560 mm - Column diameter: 160 mm - Throat depth: 340 mm - Coolant system - Workpiece vise

Condition: used, L + Z Lathe WEILER Type LZ PRIMUS GS Machine no. No. 2461 Year of construction approx. 1990 Center width 400 mm Turning diameter over bed 250 mm Center height above bed 125 mm Turning diameter over support 140 mm Center height above support 70 mm Spindle bore 24 mm Spindle speed 60 - 3000 rpm 18 steps Feed lengthwise and flat Chuck flange short taper DIN 55022 size 4 Inner tailstock taper MK 2 Drive power 1.1 kW and 1.5 kW pole-changing Mains connection 380 Volt, 50 Hz - 3-axis digital readout FAGOR, type 30i-T-B - Spindle speed via 2 motor speeds and 9 gear stages - 3-jaw lathe chuck RÖHM Ø 125 mm with stepped jaws - MULTIFIX quick-change tool holder with 1 interchangeable cassette - Set of collets Ø 1 / 3 / 4 / 5 / 7 / 8 / 10 / 14 / 15 / 16 / 17 / 19 / 20 / mm - 1 centering tip for collet chuck holder - Emergency stop - Hinged chuck guard - Splash guard - Machine light - electrical diagram - Machine mounted on a steel plate (steel plate L x W x H 1200 x 500 x 30 mm, 140 kg) Giedortd Uwepfx Abdel Space requirement L x W x H 1200 x 900 x 1560 mm Weight 520 kg good condition

Condition: used, Technical details: bore capacity in steel (diameter): 28 mm throat: 345 mm bore stroke: 190 mm drill capacity in cast iron: Ø 35 mm spindle taper MT: MK 4 spindle speed:: 50 - 1280 / 4 steples U/min feed: 0,1; 0,2, 0,3 manuell/automastic mm/U Distance spindle/table max.: 200 - 800 mm table clamping surface:: 450 x 600 mm table rotating: 360 ° table adjustment: vertical 600 mm column diameter: Ø 160 mm weight of the machine ca.: 273 kg dimension machine xH: 1,0 x 0,71 x 2,0 m Thread cutting with right and left rotation via foot switch Table adjustment via hand crank Without coolant tank Machine vice Quick-action clamping chuck Röhm Supra 3 - 16mm i.D. Gsdpfx Aju Idk Uobdsil *

Condition: used, Column drilling machine ALZMETALL type AB 4 SV Machine no. No. 14805 Year of construction approx. 1980 drilling capacity 40 mm Spindle holder MK 4 - short quill throat 340 mm Quill stroke 180 mm Table size 710 x 560 mm Column diameter 160 mm Spindle speed 30 - 765 rpm infinitely variable Motor power 2.3 and 3.4 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator gearbox - Reduction gear with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting device Giodon N Ekcjpfx Abdol Space requirement L x W x H 1200 x 725 x 2050 mm Weight 615 kg good condition

Condition: used, Technical details: max. ram stroke: 250 mm workpiece diameter - max.: 80 mm Giodpfjw Au I Ijx Abdsl max. workpiece length: max. 900 total power requirement: 1,5 kW weight of the machine ca.: 2,1 t

Condition: used, Year of construction: 1978, bore capacity in steel (diameter) 40 mm Gisdpfev Ehftox Abdel throat 345 mm bore stroke 200 mm table surface area 720 x 5 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 20403, Offer 25170 Technical Data: - Drilling capacity in steel ST 60 40 mm - Drilling ability in steel ST 60 50 mm - Drill spindle mount MK 4 - Drill spindle stroke 180 mm - Drill spindle speeds steplessly adjustable with gear stage - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm - Stage 3 120 - 420 rpm - Stage 4 420 - 1530 rpm - Throat 330 mm - 3 feeds 0.1 - 0.2 - 0.3 U/min - Table with 2 T-slots 720 x 360 mm - Height adjustable via rack with hand crank - Max. distance table – drill spindle ca. 780 mm - Max. distance machined base plate - drill spindle 1250 mm - Coolant device - Lighting - Machine vise Gjdpfxswncaij Abdoil - Various 10 pcs HSS drills - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 0125153, Offer 24280 Technical data: - Drilling capacity in steel ST 60 32 mm - Drilling capacity in steel ST 60 40 mm - Drill spindle holder MK 3 - Drill spindle stroke 175 mm - Drill spindle speed infinitely variable 60 - 1600 rpm - 3 feeds 0.1; 0.16; 0.25 mm/rev - throat depth 290 mm Giedpfx Abet Hr Svedel - max distance drill spindle - table / base plate 790 / 1210 mm - Table with 2 T-slots 570 x 475 mm - Height adjustable via rack and pinion with hand crank - Drive 400 V / 1.1 / 1.8 kW - Space requirement approx. W 600 x H 1950 x D 980 mm - Weight approx. 450 kg - with: - Emergency stop button - emergency stop button - lighting - Machine vice - 15 HSS drill bits 8 to 20 mm

Condition: refurbished (used), functionality: fully functional, throat depth: 345 mm, spindle speed (max.): 720 rpm, spindle speed (min.): 80 rpm, total height: 1,970 mm, spindle mount: MK 4, 1.) Alzmetall AB4/SV Speed range: 80-720 rpm Feed rate: 0.09/0.16/0.28 mm/rev Spindle taper: MT4 Throat depth: approx. 345 mm Drive power: approx. 1.8 kW Column diameter: approx. Ø 160 mm Quill stroke: approx. 180 mm Table clamping area: approx. 730x560 mm with 14 mm T-slots Dimensions: 1000x500x1970 mm Godpfx Asunhtxsbdoil Weight: approx. 600 kg Price: €2,400 net plus VAT. 2.) Gillardon GB30 Speed range: 60-1600 rpm Spindle taper: MT3 Throat depth: approx. 320 mm Drive power: 1.1/1.6 kW Column diameter: approx. Ø 130 mm Quill stroke: approx. 175 mm Table clamping area: approx. Ø 500 mm with 14 mm T-slots Table swivel range: approx. + / – 90 degrees Dimensions: 1000x500x1970 mm Weight: approx. 400 kg Price: €2,200 net plus VAT.

Condition: used, Pillar drilling machines Giodpfx Asb N Ezrebdel

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg Gjdpfogzlpkox Abdoil

Year of construction: 1978, condition: used, number of spindles 3 bore capacity in steel (diameter) 40 mm bore stroke 180 mm Godpfxod Ih S Se Abdsil weight of the machine ca. 2,3 t

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: Godpfx Abswd Ii Uodsil - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2004, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the Gsdpfx Abeul Efmodjil radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: used, Year of construction: 1989, machine/vehicle number: 19216, Lg.no. 22614 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drill spindle holder MK 4 - Drill spindle stroke 180 mm - Drill spindle speed infinitely variable with reduction gear - Stage 1 60 - 210 rpm - Stage 2 210 - 765 rpm Gjdpfx Abjt Etiysdeil - throat depth 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - max. distance table - drilling spindle approx. 780 mm - max. distance machined base plate - drilling spindle approx. 1250 mm - Coolant device - Lighting system - Drive 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg