Laser cutting machine

AMADA QUATTRO 2 KW

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Bodpfx Aouk U I Uoclewn Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER

Condition: used, machine/vehicle number: 004877, Max width workable: 1300 mm Bwjdpswcx Ufofx Aclon

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Bwodpohkttpofx Aclon Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: used, Year of construction: 2017, Working hours laser on: 28.313 h Working hours beam on: 8.421 h Laser power: 6000 Watt Working range laser: 3048 x 1524 x 70 mm Max. steel: 25 mm Max. stainless steel: 30 mm Max. aluminium: 30 mm Max. copper: 12 mm Max. brass: 12 mm Length: 11000 mm Width: 6050 mm Height: 2565 mm Machine weight: 12000 kg Electrical connected load: 31 kW Standard configuration - Maximum positioning speed parallel axis x, y: 120 m/min- Maximum simultaneous positioning speed: 170 m/min- Positioning accuracy Pa: +/- 0,05 mm- Repeatability Ps: +/- 0,025 mm- Maximum workpiece weight: 1100 kg- Operation via panel: ByVision Touchscreen and manual control unit Extended machine accessories Bsdpfoyrfxzex Aclown - nozzle changer 40 positions- Detection Eye - Cut Control- Power Cut Fiber Automation - ByTrans Extended

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors Bsdoh Ey Rcepfx Aclown

Condition: ready for operation (used), For sale is a CNC laser cutting system by Amada Co., Ltd., model PROMECAM / FO-3015 NT, equipped with the ASLUL 300 FO Tower automatic loading and unloading system. This is a highly productive industrial unit for automated sheet metal processing, including an integrated tower storage system with automatic material handling for efficient manufacturing processes with minimal manpower requirements. Technical Data – CNC Laser Cutting System AMADA PROMECAM 3015 NT with ASLUL 300 FO Tower Base Machine – Laser System 3015 NT Machine type: CNC laser cutting machine (CO₂ laser, flying optics) Manufacturer: Amada Co., Ltd. / AMADA PROMECAM Model: FO-3015 NT Control: AMNC-F CNC with touchscreen Laser technology: CO₂ laser, flying optics system Laser Power Laser output: 4,000 W Laser resonator: Fanuc AF 4000 Laser principle: CO₂ silent discharge Continuous power stability: ± 1% Working Area X-axis: approx. 3,070 mm Y-axis: approx. 1,550 mm Z-axis: approx. 100 – 200 mm Max. sheet size: approx. 3,000 × 1,500 mm Max. workpiece weight: up to approx. 920 kg Cutting capacity (typical): Mild steel: up to approx. 20 mm Stainless steel: up to approx. 15 mm Aluminum: up to approx. 10 mm Material thickness in general: 0.5 – 20 mm depending on material and laser power Axes and Dynamics 3 CNC axes: X, Y, Z Positioning accuracy: ± 0.01 mm Repeatability: ± 0.005 mm Positioning speed: up to 120 m/min per axis Simultaneous speed: up to 169 m/min Machine Design Flying optics system Heavy-duty cast frame for high stability Automatic pallet changer (2-table system) Automatic cutting head tracking Capacitive cutting head Connections Power supply: 400 V Total power consumption: approx. 70 kVA Compressed air requirement: approx. 6 bar Machine Dimensions and Weight Machine weight: approx. 11,000 kg Machine dimensions: approx. Length: 6,700 mm / Width: 4,400 mm / Height: approx. 2,100 mm ASLUL 300 FO Tower System – Automatic Sheet Storage Bodpfjyk S Rzex Acljwn System: automatic loading and unloading system with tower storage Max. sheet size: 3,050 × 1,525 mm Max. pallet weight: up to 3,000 kg Number of pallets: multi-level automatic storage system Pallet change time: approx. 55 seconds Features: automatic loading and unloading automatic material handling automatic pallet changing finished parts handling integration into automated production lines Equipment Flying optics laser system automatic shuttle pallet changer AMNC-F CNC controller ASLUL 300 FO Tower System automatic material handling suitable for industrial series production fully automatic operation possible extremely high productivity reduced setup times minimal personnel requirement Condition Used Technically inspected and fully functional The system can be demonstrated Immediately available Delivery time: upon agreement Freight terms: ex site, loaded free of charge Dismantling / transport / reassembly can be organized

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 441 h, machine/vehicle number: LCG3015AJ, laser hours: 228 h, laser power: 2,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness brass (max.): 3 mm, sheet thickness copper (max.): 2 mm, table length: 3,070 mm, table width: 1,550 mm, travel distance Z-axis: 100 mm, type of cooling: water, compressed air connection: 6 bar, overall weight: 9,300 kg, total length: 10,136 mm, total width: 2,840 mm, total height: 2,432 mm, Equipment: cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, The machine is in as-new condition. It is connected to power; test cuts are possible. Nozzle changer: 8 stations. Bwedpfox Tft Aox Acljn

Condition: ready for operation (used), There are 2 compressors available. 1) CSC from 300-670, year of manufacture: 1997. 2) Atlas Copco GX5FF EP, year of manufacture: 2019. Motor power: 5.5kW, max. operating pressure: 10bar, capacity FAD: 13l/s, 46.8m³/hr, 27.5cfm, noise level: 65dB(A), standard air tank size: 200l. Dimensions X/Y/Z: approx. 1430mm/665mm/1260mm, weight: 210kg. Documentation available. Bwedpotnf Iuefx Aclsn

Condition: good (used), Year of construction: 1997, machine/vehicle number: 885258, Offer 25514 Technical Data: - Max. working length: 3060 mm - Frame opening: 2690 mm - Max. pressing force: 1300 kN - Max. distance table/ram: 535 mm - Throat depth: 410 mm - Ram stroke: 215 mm - Stroke speeds: - Downward idle speed: max. 200 mm/sec - Upward speed: 135 mm/sec - Pressing speed (downward): 1 to 11 mm/sec - Total drive power: 18 kW - Pneumatic connection: 6 bar - Required space: approx. W 3800 x H 2700 x D 2400 mm - Weight: approx. 11,500 kg Bedex Ew Dqepfx Aclewn Features: - 6-axis CNC control system DELEM - Two-hand control panel with foot pedal - Crowning system - CNC-controlled backgauge with height adjustment 5 - 860 mm - Hydraulic upper and lower tool clamping - Pneumatically assisted die table shifting

Condition: ready for operation (used), Year of construction: 2006, Prinzing beading machine Type SME 200/11 year of construction 2006 throat 1100 mm Bsdpfx Aceh Hgdrolswn connected load 5,5KW max. sheet thickness 1.5 mm VA Siemens Siematic OP7 control Special equipment: -parallel top roller feed with bearing-mounted work rollers -stepless drive motor -motorised top roller feed, infinitely adjustable sensor-controlled feed for automatic operation Table-top version of sheet guide device Total weight 6700 kg The offer is only addressed to dealers in accordance with § 14 of the BGB (German Civil Code). No Sales to private persons