Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)
Arburg 1200 T 2000-800

Name: Arburg 1200 T 2000-800
Brand: Arburg
Availability: InStock

Year of construction

2019

Condition

Used

Location

Trenčianske Stankovce Slovakia

Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562) Arburg 1200 T 2000-800

Machine data

Machine type:: Arburg 1200T 2000-800 (vertical, rotary table,working hours: 9.562)

Manufacturer:: Arburg

Model:: 1200 T 2000-800

Year of construction:: 2019

Condition:: like new (used)

Price & Location

Seller location:: 3011 Sedličná, 913 11 Trenčianske Stankovce, Slovakia

Call

Details about the offer

Listing ID:: A19403861

Reference number:: 250175

Update:: 30.04.2026

Description

Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm)

Clamping unit 2000T

Table diameter: 1200mm

Angle rotation: 180 degrees

Clamping force: 200 tons

Opening force max. kN/mm: 115/500

Platen daylight max. : 600 mm

Injection unit

Screw diameter: 45 mm

Shot volume: 318 cm3

Shot weight: 291 g

Injection pressure: 2470 bar

1. Model: T model
2. Machine type: 1200 T 2000 - 800
3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant
4. Screw: Reinforced screw coupling for splined coupling geometry
5. Control system: SELOGICA ‘direct’ controller
6. Technology stage: Stage 2 servo-regulated with 2 control pumps
7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating
8. Nozzle: Open nozzle 45 mm with nozzle tip
9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2
10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating
11. Clamping platen: Mould mounting platen set, central diameter 125 mm
12. Blow unit: Mould blow unit with pressure reducer at station 1
13. Safety: Optical barrier at loading station, continuous oil cooling and filtration
14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper
15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1)
16. Electric axes: Basic equipment for electric axes control
17. I/O: 4 programmable inputs/outputs on terminal rail
18. Sockets: Additional socket combination (1 CEE, 1 Schuko)
Hnjdewugczopfx Apnjl
19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation
20. Acoustic alarm: Error alarm acoustic signal
21. Safety interlock: Interface for safety interlock of door (EUROMAP 73)
22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold
23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter
24. Manual & labels: CD operating manual & spare parts list, Slovak language labels
25. Machine feet: Anti-vibration footplates
26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme
27. Display languages: IT/EN/SK

Documents

19403861-01.pdf

Seller

Registered since: 2018

154 listings online

Call

Send inquiry

Telephone & Fax

+421 32/3... show

These listings may also fit your interest.

Listing

Contamine-sur-Arve

1,236 km

Swiss-type cnc lathe
STARSR-32J

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT Hedpfoyxr Uqox Apnjnl - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

See details

Listing

Breda

691 km

Injection molding machine
BOY60E

Call

Condition: new, Year of construction: 2023, operating hours: 50 h, Brand: Dr.Boy Model: 60E Year of construction: 2023 Operating hours: 50 Screw diameter: 32 mm Max. injection pressure: 2,142 bar Max. shot volume: 100.5 cm³ Clamping force: 60 t Max. distance between tie-bars: 360 x 335 mm Min. mould height: 250 mm Max. distance between platens: 650 mm Dimensions: 3,450 x 1,150 x 1,950 mm Weight: 2,250 kg Options: • Procan ALPHA 4 display • Hydraulic core pull (2x) • Air valve (2x) • Interface package (incl. RS232/485, OPC-UA + licence fee) • 4 Freely programmable AIO's • Robot interface Euromap 67 • Interface between safety fence and machine Euromap 78 • Colouring contact interface • Quick change mould package – Cooling circuits (3x) on fixed and moving platen Hodjx Aphtopfx Apnenl – 8-way water manifold – Ejector with quick coupling – Open nozzle with threaded tip • 6-way energy distribution box (supply via second cable) – 3x 400V – 3x 220V • Oil filling (Econfluid, ISO-32)

See details

Listing

Cleaning system - Top loader Glogar TR450

Linz-Land

1,456 km

Cleaning system - Top loader
GlogarTR450

€17,350

Fixed price plus VAT

Call

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 Hjdpofbt Siefx Apnonl The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill - Insulation of the entire system - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

See details

Listing

Swiss Type Turning Machine STAR Micronics SR-20J N

Denmark

814 km

Swiss Type Turning Machine
STAR MicronicsSR-20J N

Call

Condition: ready for operation (used), Year of construction: 2019, operating hours: 14,530 h, Control Unit Brand FANUC Hnedpfex D I Axex Apnol Model 31i-Model B Main Drive Number of axis 3 This 3-axis Star SR-20J N was manufactured in 2019. It's a Swiss type turning machine designed for precision and efficiency. Ideal for intricate machining tasks, this model offers robust performance in a compact footprint. If you are looking to get high-quality turning capabilities, consider the Star SR-20J N machine we have for sale. Contact us for more information. Application Types Turning

See details

Listing

Tiefenbronn

1,108 km

Milling machine
KNUTHEcoMill 350 CNC

Call

Listing

CNC automatic lathe TORNOS MultiSwiss 8x26

Bienne

1,178 km

CNC automatic lathe
TORNOSMultiSwiss 8x26

Call

Condition: like new (used), Year of construction: 2022, operating hours: 3,800 h, functionality: fully functional, Year 2022 - 3800 hours MultiSwiss 8x26, 6 Y-axes 8 motor spindles, 11 kW – 8000 rpm max Spindle capacity 26 mm, Z stroke 75 mm (max. workpiece 65 mm) 2 X-slide units in positions 1-8, stroke 80 mm Hnodpfx Ajxrfunspnjl 6 X-Y slide units in positions 2-3-4-5-6-7, X stroke 55 mm, Y +/-16.5 mm Counter spindle 11 kW – 8000 rpm max Z stroke 150 mm, X 170 mm HP ejector adaptation for counter spindle (requires 3010 or 3020) Fanuc 30iB CNC control Integrated PC with Windows 10 operating system 21.5" color touchscreen Independent C axis on each spindle in main and counter operations (requires 0060 or 0065 or 0070 or 0075)

See details

Listing

Retort heat treatment furnace MUT 360/400-1150

Zuchwil

1,186 km

Retort heat treatment furnace
MUT360/400-1150

Call

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 retort heat treatment furnace - As good as new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts incl. TECHNICAL DATA Plant type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour. Working temperature: ≤ 1100 °C , ≤ 1050 °C in vacuum. Control constancy: ± 2 K Temperature homogeneity: ± 6 K in the range from 600 °C to 1150 °C at the end of the settling period Hodjiryyaopfx Apnsnl Control voltage: 230 VAC / 24 VDC Working space furnace: 360 x 400 mm Loading: ≤ 50 kg Heating: three-zone Pressure: ≤ 350 mbar Final pressure vacuum when cold: < 5 * 10-5 mbar with clean, dry furnace. Installation area: 900 x 1900 x 3000 mm Total plant weight approx.: 1500 kg Sound pressure level: < 70 dB We do not assume any liability for the correctness, completeness and topicality of the information.

See details

Listing

Injection Moulding Machine Arburg ALLROUNDER CENTEX 320C 500-250 VO

Deutschland

1,034 km

Injection Moulding Machine
ArburgALLROUNDER CENTEX 320C 500-250 VO

Call

Listing

Refrigeration system, liquid chiller 13,5KW Hitema ENR 016

Güglingen

1,099 km

Refrigeration system, liquid chiller 13,5KW
HitemaENR 016

€8,545

Fixed price plus VAT

Call

Condition: as good as new (ex-display), Year of construction: 2024, The ENR series are air-cooled water chillers for industrial use for indoor and outdoor installation. The ENR 016 has axial fans, scroll compressors, internal P3 pump, condensers with finned aluminium fins and self-cleaning coaxial evaporator for maximum reliability. Cooling capacity 13,5 Kw We have many chillers directly from stock available used and new . contact us for a non-binding offer. Hnedpfx Apefmd E Ssnsl

See details

Listing

Horizontal band saw HUVEMA - BEKA MAK BMSY 560 C

Dortmund

842 km

Horizontal band saw
HUVEMA - BEKA MAKBMSY 560 C

€29,950

ONO plus VAT

Call

Condition: new, 1 brand-new semi-automatic high-performance horizontal bandsaw machine with double column guidance and 2° cutting inclination to the table support surface make: HUVEMA - BEKA MAK Model: BMSY 560 C Technical data: Sawing capacity 90° rectangular 560 x 750 mm Sawing capacity 90° round 560 mm Sawing capacity 90° square 560 mm Sawing capacity 45° rectangular 410 x 560 mm Sawing capacity 45° round 560 mm Sawing capacity 45° square 560 mm saw band size 6000 x 41 x 1,3 mm Band speed, infinitely variable 20-100 m/min. Motor power 4 kW machine dimensions L x W x H 3400 x 1000 x 2050 mm Machine weight 2045 kg Accessories / Special features: - Semi-automatic double column band saw - Linear guides - 2° saw cut to table support surface - Infinitely variable cutting speed via potentiometer on the control panel - Hydraulic vice - Hydraulic mechanical saw blade tensioning - Powerful drive motor - Sensitive cutting pressure regulation - Thermal overload protection - Optical height adjustment - Heavy duty gearbox - Coolant device - Feed roller conveyor 1200 mm - Chip brush - 1 pc. Bi-metal saw band - control panel - CE conform Delivery time: approx. 8 weeks after receipt of order Hnsdpfx Apsbw H T Dsnel Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

See details

Advertise here