Injection molding machine

ARBURG Allrounder 270-M-500-90

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Ncsdpforthkusx Abvep Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: excellent (used), Year of construction: 1997, Arburg 270 M-350-90 U Closing 35 TO year 1997 Scrow 25 mm tie bar spacing 27x27 Ncedpeg S I S Asfx Abvop

Condition: ready for operation (used), Used Machine Injection Moulding Machine Manufacturer: Krauss Maffei KM 80 C1 Year of manufacture: 2000 Only 1 machine left in stock No delivery time, immediately available Inspection possible by appointment The machine is no longer powered / No coolant connection The machine is professionally stored Technical Data: Clamping force (kN): 800 kN Platen size (mm): 610×610 Tie bar spacing (mm): Daylight opening (mm): 250 Max. (mould) open daylight (mm): 750 Control unit: MC4 Screen text language: German (cannot be changed to other languages) Ncodpou Ti Srsfx Abvsp Injection unit: Screw diameter (mm): 45 Injection pressure (bar): 1878 Shot volume (cm³): 275 Pump drive power (kW): 18.5 Heating capacity (kW): 13 Oil tank capacity (l): 270 Dimensions (m): 4.3 x 1.4 x 2.1 Total weight: 3.2 t Further photos available on request.

Condition: good (used), Year of construction: 1969, Pneumatic gluing press, Nsdpfx Aod Dxqbsbvocp pressure max. 10 bar, gluing bar with heating, gluing surface 550 x 40 mm stepless temperature adjustment for the lower and upper gluing bar from 0 - 300 degrees C, stepless adjustment of the gluing time, drive power: 5 Kw, 380 Volt-50 Hz, two-hand operation SIEMENS. Pressure build-up via articulated lever, max. opening travel approx.30 mm

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Nedpjuiykdofx Abvjcp

Condition: new, MVD Electric Bending Press Mod. S40. Useful length of bending : mm 1250. Power exerted : Ton 40 Numerical Control : ESA S630 Controlled axes No. 4 ( Y1-Y2-X-R) Max. stroke Y axis : mm 310 Internal clearance : mm 500 Rear register stroke : mm 750 Main motor power : 2 x 4.3 Kw UNIMEC rear register ( Made in Italy ) Optical scales GIVI MISURE ( Made in Italy ) Couplings with quick release type PROMECAM Faster Shorter bending processes Ncjdpfxsrp E A Ts Abvop Excellent plating results Lower maintenance and production costs Quiet Less energy consumption

Year of construction: 1989, condition: ready for operation (used), A Darley CNC press brake is available. Pressing force: 2000kN, working width: 5200mm, power: 15kW, oil capacity: 160l, machine dimensions X/Y/Z: approx. 5500mm/1900mm/3100mm, weight: approx. 20000kg. Including tools and accessories. Documentation available. On-site inspection is possible. Ncjdpevf Ixyjfx Abvop

Condition: good (used), Year of construction: 1990, For sale: forklift Clark C500 Y 130 PD The forklift has been in continuous use at our company – although only occasionally for handling heavier loads. We have been using it in our company for 7 years. It is in good condition. We are selling it because we want to purchase a model with a higher lifting capacity (10 tons). Ncjdpfx Aeu D D H Isbvsp Technical Specifications: Model: Clark C500 Y 130 PD Year: 1990 Maximum lifting height: 535 cm Minimum total height: 370 cm Fork length: 155 cm Capacity: 6 tons (6000 kg) Total weight: approximately 8500 kg Transmission: hydrostatic (with multiple speeds to choose from) The price is €7950, but we will consider a better offer. Tags: forklift, Clark, Jungheinrich, Linde, OM, CAT, Cesab, Detas, Manitou, Still, Hyster.

Condition: good (used), Year of construction: 2002, Nette gebruikte kantbank van Safan Type CNCL K 170 3100 TS1 Safan TS1 besturing Capaciteit 3100 x 170 ton Y1, Y2, X, R, Z1 en Z2 CNC gestuurd Nedpfx Aowz I Ekebvjcp CNC Bombering Wila New Standard gereedschapsklemming

Condition: new, Year of construction: 2025, sheet thickness - max. 8 mm pressure 200 t Nodpfx Asxf Na Uobvscp chamfer lenght 3200 mm engine output 15 kW return speed 105 mm/min working feed 9 mm/sec x-travel 600 mm Max. opening height 570 mm control DELEM DA53T GERD WOLFF KANTO 200T CNC Electro-Hydraulic Press Brake CNC axis accuracy 1) Machine sliders (Y1, Y2) – synchronisation precision: The slider movement axes control the bending depth and bending angle. The system consists of the control unit, two glass scales (Y1, Y2) installed on the work table, electro-hydraulic proportional valves and an amplifier. A closed control loop detects and controls the relative position of the slide and table as well as the speed and position of the slide. This ensures the synchronisation of the slide and maintains the bending depth and angle with high precision. Positioning accuracy: ±0.02 mm Repeatability: ±0.02 mm 2) Machine backgauge (X axis): The forward/backward movement of the X-axis controls the dimensions of the sheet metal cut. The stop bar is driven by a servo motor and moves the crossbeam via a ball screw and linear guide. Operation is stable and precise. Positioning accuracy: ±0.10 mm Repeatability: ±0.03 mm 3) Mechanical compensation system (V axis): The pull plate of the mechanical compensation is moved by a motor so that the compensation points are formed in an arc shape. The points perfectly compensate for the elastic deformation of the work table and slide to ensure angular constancy and straightness of the workpiece. Position sensors and CNC control ensure precise regulation.