221K-350-100

ARBURG

Condition: ready for operation (used), Year of construction: 2005, clamping force: 400 kN, This 3-axis Arburg 270 C hydraulic injection moulding machine was manufactured in 2005. It features a total connected load of 54 kW and an integrated part discharge conveyor belt for efficient operation. The machine is CE marked and includes a Selogica control panel for user-friendly operation. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 270 C machine we have for sale. Contact us for further details. Gkedpfxozh Ey Ae Akhed - Model: ALLROUNDER 270 C 400 - 100- Operating Voltage: 400 V 3~ 50 Hz- Control Voltage: 230 V ~ 50 Hz / 24 V DC- Motor Rated Current: 59 A- Heating Rated Current: 31 A- Total Rated Current: 90 A- Total Connected Load: 54 kW- Control System: Selogica Control Panel- Additional Equipment: Integrated part discharge conveyor belt- Space Requirement / Footprint: 3.2 qm- Total Power Requirement: 15 kW- Lubricating Oil Type: Hyspin SP32 (Hazard class A2)- Oil Capacity: 160 l- Standards Compliance: CE Marked- Equipment: Integrated conveyor belt, control panel terminal- Optional: A cooling system and a second machine are available for an additional charge.- Until now, both machines have been running on the same cooling system.

Condition: used, Year of construction: 1988, Technical details: x-travel: 800 mm y-travel: 410 mm z-travel: 510 mm control: Fanuc 10 MA Gkodpfx Asy S T T Uokhed rapid travel x/y/z: 20/20/15 mm/min table surface area: 1100 x 450 mm tool taper: BT 40 tool magazin:: 30 BT 40 max. tool length: 250 mm max. tool weight: 8 kg power requirement: 7,5/5,5 kW turning speed range: 6000 1/min weight of the machine ca.: 6,3 t Accerories 2 Chip conveyor, rear side disposal Under offer is a complete CNC tool shop, which will be given up due to old age of owner. The Mori Seiki is still highly accurate. All existing tool holders, tools, drills, vices etc. come with the machine. All measuring devices also come with the machine. Upon request orders for parts to be made can be passed on to new owner. This is a low cost all inclusive opportunity for a "Startup" *

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-500-60 Year of manufacture: 1998 Serial number: 173062 Control system: Arburg Selogica Gksdpfx Asx Eiq Hjkhod Screw diameter: 18 mm

Condition: excellent (used), Manufacturer: ARBURG Gkjdpfx Akox Eithohsd Model: Allrounder 370S-500-100 Year of manufacture: 2011 Serial number: 218960 Control system: Control type: Arburg Selogica Clamping unit: Clamping force: 500 kN Injection unit: Injection type: vertical (vertical injection unit) Screw diameter: 20 mm

Condition: excellent (used), Year of construction: 2008, Injection molding machine BATTENFELD HM 60/350 S Year of manufacture: 2008 Injection elements: Screw diameter: 35 mm Injection weight : 153.8 g Injection pressure: 2083 bar Injection volume: 169 ccm Gedsk Rnq Nepfx Akhekd Closure elements: Closing force : 60 t Clearance between columns: 370x320 mm Dimensions of table plates max: 550x530 mm Ejector: hydraulic Closing system: hydraulic Control: UNILOG B6 Additional equipment: Machine in very good technical condition Euromap 67 Dimensions: Weight: 3100 kg Length/Width/Height: 3.79x1.24x1.88 m Power supply: Pump/motor: 15 kW Heaters: 10.4 kW Total: 25.4 kW

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 370S-700-70 Year of production: 2010 Serial number: 214430 Gkodpfx Asx Eirqjkhod Control system: Arburg Selogica Direct Clamping force: 700 kN (70 tons) Screw diameter: 18 mm

Condition: ready for operation (used), Year of construction: 2001, clamping force: 500 kN, injection pressure: 2.2 bar, For sale is an injection molding machine of the brand Arburg and the type 320 S 500-150 Gkodpfx Akjqmn Egehsd The machine is in working order Technical data - Clamping force: 500 kN - Distance between the tie bars: 320 mm x 320 mm - Mold thickness: 225-350 mm - Clamping platen dimensions: 445 mm x 445 mm - Opening of the clamping platen: max. 550 mm - Screw diameter: 30 mm - Injection pressure: 2 200 bar - Weight: 2 250 kg On request, for an additional charge, dismantling, loading & transport can be organized for you throughout Europe Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale BUYING / SELLING PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 1999, condition: ready for operation (used), Max. clamping force: 500kN, opening stroke: 350mm, tool installation height: 200mm, heating output: 6.5kW, screw diameter: 40mm, weight: 2.33t, no documentation available. Gksdpfx Aeilhfcokhed

Condition: ready for operation (used), Year of construction: 2018, operating hours: 19,428 h, clamping force: 1,500 kN, Electrical injection moulding machine manufactured in 2018. This Arburg ARBURG 520 E 1500-290 features a clamping force of 1500 kN and an injection unit size of 290. It includes a highly wear-resistant thermoplastic cylinder with a screw diameter of 30 mm. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ARBURG 520 E 1500-290 machine we have for sale. Contact us for further details. Gkjdpfx Aks Ai Skkehsd 2 Machines available- Clamping Force / Injection Unit Size: 1500 kN / Injection unit size 290- Operating Hours (Pump): 24,234 h (as of 05.11.2026)- Operating Hours (Automatic): 20,965 h (as of 05.11.2026)- Operating Hours (Semi-Automatic): 0 h- Total Machine Cycles: 3,080,783- Screw Diameter: 30 mm (Highly wear-resistant thermoplastic cylinder, CrN coated screw and non-return valve, mixing section)- Non-Return Valve: Extended bushing and shortened stroke- Drive / Hydraulic System: axw Control ScrewPilot via servoelectric direct drive, 15.5 kW small accumulator hydraulics with 11.2 l/min charging flow rate- Control Unit: Selogica direct- Clamping Platen Centring: Central Ø 125 mm, continuous groove in fixed platen (Y-axis: 6 mm deep, 22 mm wide + 0.02 mm), M12 Euromap mounting holes- Core Pulls: 2 core pulls, simultaneous motion P/Q controlled, programmable; Core pull 2 extended to fixed platen; max flow rate 100 l/min- Ejection System: Electromechanical ejector, synchronised with mould opening, ejector quick-release coupling, ejector plate safety connection- Nozzle: Open nozzle 30 mm, tip with R 19 mm, programmable controlled nozzle contact force- Mold Height Adjustment: Servoelectric mould height adjustment with automatic clamping force regulation- Temperature Control / Heating: 12 electrical heating control circuits for mould heating (Harting HAN 24E special assignment); 1 additional heating control circuit for nozzle/adapter; mould temperature control interface 20 mA with connection cable for HB-THERM; temperature circuits up to max. 100 °C with flow measurement- Pneumatics & Valves: Pneumatic service unit with 3 pressure reducers (3x 1000 l/min); blow-off unit 1 with 3/2 valve on fixed platen; electric and pneumatic actuation NVD1 in mould- Interfaces: Robot system interface per EUROMAP 67 (50-pin) & EUROMAP 12 (F9264); safety gate door protection interface (EUROMAP 73); ALS (OPC-UA) ARBURG host computer interface; CF-card data storage; EUROMAP 65 chip card operator authorization; dosing / coloring unit interface; external conveyor belt control interface; container changer device interface; serial/USB printer interface; Mobile SELOGICA AMS connection- Socket Distribution: Front operator side with 1 CEE, 1 Schuko; special distribution at rear end of machine base with 2x CEE 16A, 1x 32A, 3x Schuko 10A- Lighting & Signaling: Waldmann MCXFL 3S LED machine light in mould installation space (automatic on/off with safety gate); acoustic and flashing light fault indicatorsIncluding Peripheral Equipment:- X-Axis (Horizontal Beam Traverse): Stroke: 2,500 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Y-Axis (Demoulding Stroke): Stroke: 700 mm; Drive: Brushless servomotor; Linear instantaneous speed: 3.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.1 mm- Z-Axis (Vertical Stroke): Stroke: 1,400 mm; Drive: Brushless servomotor; Linear instantaneous speed: 4.00 m/s; Position accuracy: ±0.5 mm; Repeatability: ±0.

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from Arburg, model 370 C 800-100. The injection unit has been removed but is included. Overall, the machine is in good condition. Technical specifications: Year of manufacture: 2007 Clamping force: 800 kN Distance between tie bars: 370 x 370 mm Maximum platen distance: 750 mm Tool installation height: 250 mm Injection unit: 18/20/25/30 (selectable) Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices include VAT. Inspection is possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine buying and selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website. Gkodpjx U Dnusfx Akhsd

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Stroke 130mm requested power 4 KW Gjdpfofcw Apox Akhjkd Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: good (used), Year of construction: 2000, operating hours: 118,400 h, functionality: fully functional, machine/vehicle number: 182854, clamping force: 2,500 kN, overall weight: 14,000 kg, heating capacity: 23.1 kW (31.41 HP), type of input current: three-phase, For sale is an Arburg 630 S 2500-130 injection moulding machine. The machine is in good condition and ready for immediate operation. Technical data: Year of manufacture: 11/2000 Place of production: Made in Germany Clamping force: 2500 kN Operating hours: 118,400 h Injection unit: 1300 (shot volume/capacity) Total machine weight: 14,000 kg Operating voltage: 400 V (3 ~ AC) Frequency: 50 Hz Heating capacity: 23.1 kW Pump motor: 45.0 kW Total connected load: 68.1 kW Transport and loading can be organised throughout Europe for an additional charge, upon request. Prices are subject to VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? Gjdpfjyx Daxjx Akhokd For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 2003, For sale is a 2 component injection molding machine brand Arburg and type 420 C Gkedpfslwxpisx Akhsd The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104-1 Gkjdexlu E Aspfx Akhsd Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2011, operating hours: 55,806 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, total length: 4,700 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 4,850 kg, For sale is an Arburg injection moulding machine, model 470 C 1500-400. The offer includes Arburg handling, type Multi Select Axis X/Y/Z 600/600/1400 mm. The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2011 Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Mounting plate: 650 x 650 mm Operating hours: 55,806 h (pump) Gedpfx Asw E Itijkhskd Injection unit: Ø 45 / SP 400 Shot volume: approx. 254 cm³ Shot weight: approx. 232 g Injection pressure: up to 1,580 bar Dimensions: approx. 4,700 x 1,700 x 2,000 mm Weight: 4,850 kg Transport and loading can be organized Europe-wide upon request (at extra cost). All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.