Laser welding system

ARNOLD 20435 DCS

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW Hodpfxew T Sd Tj Aadsfc WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: excellent (used), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive, graphical user interface (GUI) running on Microsoft Windows XP Professional. Instrument configuration includes the following features: • Magnification range: 5x – 300,000x • Acceleration voltage: 0.3 – 30 kV • Tungsten filament cathode (LaB6 cathode optional) • Large fully motorized sample stage with eccentric tilt capability, including: – Graphic navigation on the sample holder – Easy sample navigation via click-center-zoom – Field-of-view controlled navigation via two navigators – Relative coordinate navigation – Save and recall of sample positions – Adjustable stage field-of-view selection • Field-of-view correction during rotation via computer-driven eccentric rotation • Field-of-view correction during tilting via computer-driven eccentric tilting • Calculation of the possible tilt angle based on sample geometry • Automatic focus tracking when moving the sample in the Z-axis • Intelligent limit switches for all motorized axes • Stage travel: X = 125 mm Y = 100 mm Z = 5 to 80 mm (stepless) T = -10°C to +90°C R = 360° (continuous) • Secondary electron detector for high vacuum operation • Newly designed, super-conical objective lens for optimal resolution at high tilt angles • Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV Hfsdpfxjmn Rcqe Aadoc • Simultaneous live imaging with multiple detectors • Powerful image measurement functions • Movie function for recording dynamic processes • Versatile specimen chamber with numerous expansion options: free ports for EDX, WDX, EBSD, cathodoluminescence, etc. • Low-maintenance, quiet pump system consisting of a fore vacuum pump, vibration-free high-performance diffusion pump, and electromagnetic valve control • Comprehensive safety procedures against misuse and external media failure • Ergonomic, height-adjustable system table • SEM starter kit including 2 sample holders, tool kit, and 6 replacement filaments Additional equipment for SEM: • Turbomolecular pump (instead of standard diffusion pump) – Use of a turbomolecular pump eliminates the need for cooling water during SEM operation. Further SEM equipment: • PC for SEM control including TFT monitor • ΟΧ200 Bruker Quantax 200 Extended EDX System – Bruker EDX software will be transferred to new owner upon purchase • Nitrogen-free, energy-dispersive X-ray analysis system including: – SDD detector with 127 eV energy resolution or better – Detection for all elements from boron upwards – Vibration-free, maintenance-free. Peltier cooled (no nitrogen required) – Pulse processor – TFT monitor – Spectrum measurement and element identification – Fully automatic, quantitative, standardless elemental analysis – Image acquisition – Ultra-fast qualitative line scan – Ultra-fast qualitative element mapping – Data management and archiving system – Report generation and results output – Data communication – Installation and user training – HyperMap – Multipoint analysis – Bruker xFlash detector (SDD) with signal processing unit SVE III Scope of delivery: (see photos) Condition: used (Subject to changes and errors in the technical data and specifications!)

Condition: excellent (used), Year of construction: 2016, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 810 mm, CNC HEIDENHAIN iTNC 530 X/Y/Z 2,400/1,500/810 mm retrofitted 4th axis 12,000 min-1, 40 kVA, , traverse paths weight 7.800 kg Hjdsq Rcu Eepfx Aadsfc Table with vacuum plate with BORNEMANN 960 suction unit

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY Hedsx I A Hcepfx Aadsfc • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Hjdox Atyaepfx Aadofc Tool cabinet and cutting tools not come. Only tool holders will come.

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 1845/455, Completely refurbished: Mechanics, geometry, hydraulics, and electrical components Wheelhead Disassembly, cleaning of parts, replacement of worn and defective components, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, plus adjustment. New paintwork. Workhead Hodpfx Aaext Ilfsdjfc Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Tailstock Disassembly, cleaning of parts, replacement of worn and defective components, motor replacement, replacement of belts. New spindle bearings. New paintwork. Internal grinding attachment Disassembly, cleaning of parts, replacement of worn and defective components, installation of the support and geometry alignment. New paintwork. Hydraulics Disassembly, motor replacement, hose replacement, defective and worn parts replaced. Hydraulic block checked. X-Axis Disassembly, replacement of worn items such as O-rings, seals, rings, etc., overhaul of hydraulic piston, regrinding of tables. Z-Axis Disassembly, regrinding of tables, replacement of worn and defective parts, overhaul of hydraulic piston, scraping of V and flat guides. New paintwork. Measuring system Digital 2-axis display included. Electrical cabinet Replacement of motor contactors and relay controls. New wiring. New variable speed drive (frequency inverter) for the workhead. TECHNICAL SPECIFICATIONS Distance between centers: 1500 mm Distance between centers (workhead to tailstock overhang): 1650 mm Center height, standard: 125 mm Center height with riser blocks: 225/250 mm Maximum grinding diameter: Ø 250 mm Maximum grinding diameter with riser blocks: 450/500 mm Table Usable surface: 2060 x 140 mm Max. length and width for surface grinding: 1750 x 200 mm Longitudinal travel, manual or hydraulic: 1750 mm Manual table movement, 1 handwheel revolution – coarse: 20.006 mm Manual table movement, 1 handwheel revolution – fine: 2.457 mm Table speed, continuously via hydraulics: up to 6 m/min Table swivelling: 6° Stop and return: 0–5 sec. Workspindle Workpiece speeds, continuously variable (electric): 20–400 rpm Swivelling: 360° Workspindle taper (internal): MT5 Tailstock Internal taper, tailstock spindle: MT3 Spindle retraction, manual or hydraulic: 30 mm Diamond dresser taper (internal): MT0 Universal grinding head Cross slide travel for wheel: 285 mm Rapid traverse for wheel slide, front and rear: 40 mm Grinding spindle speeds: 1500 – 1700 – 2200 – 3600 rpm Vertical grinding spindle movement, center heights: 125–330 mm Max. wheel for cylindrical grinding: 400 x 50 x 127 mm Max. wheel for surface grinding: 250 x 20 x 76 mm Head swivelling with locking at every 90°: 270° Wheel feed 1 division of the micrometer drum: 0.005 mm/Ø Automatic wheel feed, max.: 0.9 mm/Ø Motors Grinding spindle motor: 2,900 rpm / 4.0 hp Workspindle motor: 3,000 rpm / 2.0 hp Coolant pump motor: 2,850 rpm / 0.12 hp Internal grinding attachment Bore: 70 mm Internal grinding spindle speed Ø70 mm: 14,000 rpm Internal grinding spindle speed Ø50 mm: 21,000 rpm Subject to error or omission, the technical information is provided without obligation.

Condition: good (used), Year of construction: 2007, 1 used CNC tool grinding machine Make: Schneeberger Model: Corvus GDS 650 Year of manufacture: 2007 CNC Control: FANUC 160i Software: Quinto 4.3 Activated software options (option numbers): 1, 2, 19, 21, 22, 30, 31, 32, 35 - Fanuc loading robot - Coolant system Travel: X-axis: 650 mm Y-axis: 300 mm Z-axis: 300 mm C-axis swivel range: +150°/ -60° C’-axis swivel range: +/- 180° Grinding spindle: Wheel diameter up to 250 mm Hfjdpfxeu A Dn Ne Aadoc Speed: 0 – 10,000 rpm Max spindle power: 26 kW HSK 80 interface Max. number of wheels: 6 Workpiece spindle head: Vmax: 180°/s Drive power: 1.6 kW ISO 50 interface Precision (resolution): Linear axis resolution: 0.001 mm C-axis: 0.001° Dimensions: Length: 3,100 mm Width: 1,915 mm Height: 2,190 mm Weight: 8,500 kg U-axis is integrated with steady rest, clamping cylinder, and tailstock 6-pallet loader (diameter 3 to 32 mm) 64 plastic collets Technical data subject to change without notice

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Hsdpfxsd Tx Ahj Aadjfc

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Hjdpfx Aaerairwedefc Pallet changing device, 2 pallets 400mm x 400mm Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 Hjdpfx Aaeh S Dncjdofc year 1999 Screw diameter 55 mm In top condition, still in operation