Spray booth with supply air ceiling

Berkmann

Condition: used, Year of construction: 1994, functionality: unexamined, Underfloor extraction with fan Edge extraction with fan Pedpfsyuf S Hox Aaasgi Air supply unit 3102 WW, output 75 kW Air volume 10,500/5,250 m³/h Air supply system with supply unit and supply ceiling (replaces the extracted air) Solvent evaporation device Fire protection flap Control system

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Pgodpfjpl D Hxox Aaaji

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit Pgsdpfsxwz H Rex Aaaji - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: ready for operation (used), For sale: conveyor belt as seen in the photos, approximately 7.5 m long. Belt width 0.3 m. Possibility of transport. Poder Nvx Uspfx Aaasgi

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Möhringer gang saw system consisting of: Round log loading station with feeder Hydraulic clamping carriage with auxiliary carriage Möhringer OSS71 gang saw, built in 1995 with width adjustment and Jansen clamp Hydraulic riving knife and cross-cut saw Gang saw roller conveyor Vollmer CnHv gang saw sharpening machine Vollmer AT gang saw setting machine Podpfxjv Uat Uj Aaaegi Vollmer PH4D gang saw setting machine

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit Psdpfoidi Ivjx Aaaogi - Longitudinal sanding unit - Shoe - Brush unit - Ionization

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit Pgjdpowka S Iefx Aaaei - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Pgsdpfx Aaeumpp Ejasi Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Location: Flörsheim Availability: Immediately

Condition: used, Holz Her CUT 6120 Heavy-duty precision high-performance panel saw Cutting length: 3900 mm Cutting depth: 3100 mm Saw blade projection: 82 mm CUTCONTROL 2 control system, 17" TFT touchscreen Powerful optimization software: CD CUTTING-SYSTEM Label printer 3 air-cushion tables 1800 x 600 mm Automatic angle pressing device, up to max. 1300 mm Automatic notch-cutting device Offcut management device Remote cable control Pneumatic trimming stops Main saw unit: 11 kW, saw blade diameter 350 mm Scoring saw unit: 2.2 kW, saw blade diameter 180 mm Saw carriage feed: 0–100 m/min, stepless Saw carriage return: 130 m/min Pjdpfx Asytrvisaaogi Rip fence feed: 0–100 m/min (EU 0–25 m/min) Rip fence return feed: 100 m/min Rip fence clamps: 7 units Compressed air supply required: 6 bar Extraction connection on main machine: 1 x 120 mm Extraction connection on pressure beam: 3 x 120 mm Extraction capacity: 3500 m³/h Air flow velocity: 30 m/sec Machine dimensions approx. 6000 x 6000 mm Weight approx. 5,000 kg Machine from retirement / craftsman's workshop Machine is in TOP CONDITION Ex site

Condition: used, Length 2700 mm Width 1100 mm Height 850 +- 150 mm engine output 0,37 kW Electric capacity 0,5 kw compressed air 6 bar Horizontal impregnation system 'Pro flow' for individual parts with rinsing circuit. ----- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. ----- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blow-off and outlet. Horizontal feed of the workpieces By motor-driven rollers made of plastic with grooves. Electrical converter for controlling and changing the conveying speed. transmission The machine is equipped with an exclusive system so that all Gear located outside the flood chamber and easily accessible to the Operators are to guarantee a longer service life and the to facilitate maintenance operations. The moving components are protected by cover plates and appropriate seals protected. circulation pump Pneumatic double diaphragm pump made with valves, seals and diaphragms Nitrile rubber and housing made of plastic material (PVDF). air jets A blow-off system is present in the first chamber to prevent product leakage avoid. A second blow-off system after the flood chamber blows off the excess product from the workpiece. Electrical panel According to CE, degree of protection IP 55. Including inverter to the set feed rate. technical features Length mm 2700 Width mm 1100 Conveyor speed (min./max.) m/min 3-6 Motor power train group kW 0.37 Installed electrical power kW 0.5 Distance between infeed and outfeed rollers mm 2520 Working height (adjustable) mm 850 +- 150 Min. length of the workpieces to be flooded mm 250 Max. width of the workpieces to be flooded mm 300 Max. height of the workpieces to be flooded mm 250 Compressed air consumption lt/min 2000 Pressure of the required compressed air bar 6 Equipment and available accessories Flushing circuit for Pro Flow ----- Price of the above machine: on request! plus packaging and transport Pedpfjnl Nqqjx Aaaegi ----- (Technical information according to the manufacturer - without guarantee! Illustrations may be dated Deviate from the original, prices net, plus VAT (domestic))