Milling machine

BF-TEC 7550 C

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Ljdpfxsy Icbaj Afweaf

Condition: ready for operation (used), An old Colchester engine lathe is available. Center height: 216mm, swing diameter over bed/cross slide/in gap: 432mm/267mm/711mm, distance between centers: 2000mm, spindle bore: 76mm, speed: 1600rpm, bed width: 343mm. Machine dimensions X/Y/Z: approx. 3200mm/1100mm/1400mm, weight: approx. 2500kg. An on-site inspection is possible. Ljdpey E S D Eofx Afwjaf

Condition: used, Year of construction: 1991, bore capacity in steel (diameter) 50 mm arm length 1100 mm Lasdpfx Afeu Sblwewef workpiece height max. ca. 1000 mm bore capacity in cast iron 60 mm spindle taper MK 5 spindle turning speed range 28 - 2500 U/min feeds 0,05 - 2 mm/U quill stroke 300 mm distance basic plate - spindle nose 630 - 1380 mm crossrail adjustment vertical 750 mm total power requirement 6 kW weight of the machine ca. 4 t dimensions of machine L x W x H 2,74 x 1,14 x 2,59 mm - with thread cutting attachment - Accessories: box table 550 x 550 x 550 mm, vice, coolant

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch Lajdpfx Ajdzqb Ejfwsf - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: used, Year of construction: 1979, functionality: fully functional, Swing over bed 2000mm Swing over carriage 1700mm Turning lenght 8000mm Max. weight of workpiece in centers 80 ton Max. weight of workpiece in centers and steadies 100 ton Main motor power 150kW Spindle speed (3 ranges) 0,5-160rpm 4-jaws independent chuck dia. 1700mm Min. clamping dia. 170mm Max. clamping dia. 1400mm Dia. of tailstock quill 450mm Bed width 2280mm Height of bed 650mm Special equipment: - 4-jaws chuck dia. 1700mm - tool system: double shelf toolpost - steady rest dia. 200-600mm Lasdpfx Afjyy Nx Newef - steady rest dia. 600-1100mm - open steady rest up to 1600mm Total weight of the lathe 110 tons

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t Lodpfotv Iklox Afwjaf dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: good (used), Year of construction: 1992, Offer 23426 Technical Data: - Cutting range at 90° round 420 mm - flat 635 x 290 mm - Cutting range at 45° round 360 mm - flat 420 x 300 mm - Saw blade dimensions 5200 x 32 x 1.1 mm - Infinitely variable cutting speeds 18 to 108 m/min - Hydraulic lifting and lowering of the saw frame - Hydraulic material vise - Cutting pressure infinitely adjustable 0 - 10 m/min - Total drive power 400 V / 2.2 kW - Coolant device - Machine mounted on bogie - Feeding roller table motor-driven 4000 mm - Discharge roller table with length stop 6000 mm - Required space approx. W 2500 x H 1400 x D 1100 mm Lsdpfxerl Irvo Afwsaf - Machine weight approx. 950 kg - Roller table weight 2000 kg

Condition: used, Year of construction: 2011, Technical details: turning diameter over bed: 1090 mm turning diameter over support: 690 mm turning length: 1100 mm centre distance: 6000 mm turning dia. in gap: 1250 mm centre height: 500 mm spindle passage: 152 mm range of revolution per miute: 6,3 - 1250 U/min face slide travel: 525 mm tailstock quill taper MT: MK 6 tailstock quill adjustment:: 260 mm cross feed: 0,016 - 19,45 mm/U Lajdpfozdkz Dex Afwef longitudinal feeds:: 0,032 - 38,9 mm/U number of feeds: 160 spindle bore: 155 mm total power requirement: 30 kW weight of the machine ca.: 10,65 t dimension machine approx.LxWxH: 8,3 x 2,0 x 1,90 m The machine is equipped with: Digital Readout (DRO) 4-position tool post Tailstock Rapid traverse Lead screw and feed rod Heavy-duty machine bed Conventional design *

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, With 3-axis digital display Year of manufacture: 2015 Spindle bore: 54 mm Distance between centers: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm, stepless speed control with display on screen Including the following accessories: Multifix tool holder Coolant system Three-jaw chuck Ø 200 mm Four-jaw chuck Ø 250 mm Collet chuck complete with collets up to Ø 32 mm Chuck guard Chip guard with lighting Fixed steady rest Ø approx. 150 mm Travelling steady rest Ø approx. 100 mm Ledpfx Afeyybxneweaf 4 pcs. height-adjustable machine feet 1 pc. live center Operating manual

Year of construction: 1980, condition: reconditioned (used), Universal swiveling and tilting table for MAHO MH 1000 Ledpfsfx Aipex Afwjaf Clamping area: 1050 mm x 630 mm The universal swiveling and tilting table is in good condition!