Veneer saw with planing head

Langzauner LZ 2 / 3050

Condition: excellent (used), Year of construction: 2019,

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Lsdpfet Uduxox Ab Nsah

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting length (max.): 3,050 mm, cutting height (max.): 45 mm, type of input current: three-phase, saw blade diameter: 180 mm, rotational speed (max.): 9,000 rpm, input current: 8 A, input voltage: 400 V, milling height: 45 mm, power: 3.7 kW (5.03 HP), input frequency: 50 Hz, number of digital displays: 1, We offer this very well-maintained Langzauner edge, veneer, and panel cutting machine, model LZ 5/2E - 3050. Available in a combined saw-milling version. CE version. Longitudinal design of the tool carriage on hardened and ground guide rails, lifting and lowering of the saw and milling unit is pneumatic, as well as pneumatic saw blade adjustment, adjustment range 2mm, cable guide for the tool carriage in a plastic energy chain, guidance of the unit by compact LM linear guide units. Central control panel directly in the handling area, electronically adjustable feed speed with soft start and rapid return when the tools are lowered, dust extraction channel with connection socket 150mm, prepared for connection to a central or existing dust extraction system. Special accessories: - Parallel rack compensation in the pressure beam. Prevents tilting of the pressure beam. - Movable, front support table 200mm wide - Rear sizing table for veneer processing, size 3050 x 500 mm, with parallel guidance and pneumatic stop lock - Foldable inserts for stop depth 800mm - Digital width display. Quick and accurate setting of the stop depth. Type: LZ 5/2E - 3050 Factory number: 2/4717 Year of manufacture: 1998 Power: 3.7 kW Rated voltage: 3 x 400V + N Rated current: A Frequency: 50 Hz Ljdpfx Abez Ikupj Nsah If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2003, High-quality veneer saw with planer head for subsequent trimming. Maximum cutting length: 3050 mm. Laodpfx Abszlqbas Njh Equipped with a rear finger stop.

Condition: new, Year of construction: 2024, functionality: fully functional, power: 5 kW (6.80 HP), cutting height (max.): 200 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, cutting length (max.): 3,200 mm, cutting width at rip fence: 1,300 mm, sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm Lodpfx Aouh R R Esb Noah - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder - On/Off switch on the double roller carriage - Front support roller

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 10000241, workpiece height (max.): 160 mm, workpiece width (max.): 310 mm, number of spindles: 4, WEINIG POWERMAT 1500 - SPECIAL MACHINE CONFIGURED FOR MILLING WOODEN DOOR FRAME PANELS Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 10 - 160mm (with tool flight circle 93-163 mm)Description of machine parameters Number of spindles 4 Spindles bottom 1 Spindles right 1 Spindles left 1 Spindles top 1 Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity Lajdpfx Abeuygcwo Nsh

Condition: new, Technical data: Working width: 970 mm Grinding width: 950 mm Working height: 3 - 160 mm 1 steel aggregate 2 combination unit with shoe The shoe is pneumatically pressed Sanding belt dimensions: 970 x 2150 mm Lsdpfx Abeg A D Anj Neah Common motor power of 2 grinding aggregates: 11 kW The speed of the feeding belt on the converter: 16-18 m / sec. Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roll diameter: 150 mm Sanding pad width: 50 mm Sanding belt speed: 18 m / s 1 unit Compressed air consumption: 20l / min Standard equipment: Mechanical oscillation of the sanding belt without the use of compressed air. ECO GEAR SYSTEM Smooth regulation of the feeding belt on the converter 4-20m / min Automatic star / delta start Steel roller on the first aggregate, rubberized on KOMBI agragata Electronic table height display Automatic reading device for gr. material and table position setting Safety switches Automatic machine switches Main engine brake Rubber pressure rollers 2-roller table at the entrance and exit In stock! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Condition: used, Year of construction: 2009, functionality: fully functional, Machines connected in one line (all three machines are only sold together). 1. Veneer crossfeed splicing machine Fisher+Rueckle FZR-15, year 2009 2. Direct Stacking Device Fisher+Rueckle DAR-22, year 2009 3. Scissor lifting table 1000 kg TECHNICAL DOCUMENTATION (full on request) Veneer Cross-feed Splicing Machine FURNIMASTER FZR-15 Laodpot Akcfsfx Ab Neh Veneer format length (longitudinal to the fibre) 350 - 1500 mm Veneer format width (transverse to the fibre) 50 - 500 mm Veneer strip thickness 0.3 - 1.5 mm Max machine output 30 cycles/min. (the output rates are related to an average veneer strip width of 100 mm transversely to the fibre) Connected load (basic machine): Power rate 13.5 kW Compressed air pressure 6 bar Power consumption: Electric power 6.2 kWh Compressed air supply 15 NL/min. Dimensions and weight (basic machine): 2940 mm L x 1000 mm W x 1530 mm H. 3200 kg

Condition: used, Year of construction: 2025, functionality: fully functional, Equipment: CE marking, Holz-Her Edgebanding Machine SPRINT 1329 Multi with motorized pressure beam PUR & EVA adhesive (up to 60mm) with the NEW GLU JET GJ725 PUR PRO including vacuum pump motorized infeed guide rail guide for narrow parts edge trimming IntelliSet - tool correction fa.s.t. - setup in the gap + remaining length display of the edge band roll iTronic - pressure & adhesive quantity control automatic chain lubrication second workpiece discharge + air cushion table in the infeed area Lasdpfxszx Enne Ab Njh fully motorized equipment for all units multifunction milling - radius 1.3mm (2x) & 2mm (2x) + nesting package, vertical, bottom spraying devices + padding unit with texture finish for normal applications and structured surfaces and more The machine is currently being refurbished at the factory in Voitsberg / Austria. Completion: approximately October / November 2026 Delivery, installation and training for the machine can be arranged directly through us for an additional fee. The machine is currently located in our delivery warehouse in Gratwein / Austria. In the event of discrepancies between the German version and a foreign language version, only the German version shall be binding. Our terms and conditions can be found on our website at holzher.de/de/agb.

Condition: like new (used), Year of construction: 2007, I sell the veneer splicing machine KUPER FLI. Year 2007. Lajdevxvc Hspfx Ab Nsh Very good condition. Available immediately.