Edge Bander

BIESSE STREAM B1 8.5

Condition: used, Year of construction: 1975, bore capacity in steel (diameter) 35.0 mm bore capacity in cast iron 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 65 - 1750 U/min Ffsdpfxsxabuaj Abmot table-size 425 x 500 mm column diameter 155 mm feed 0.1-0.2-0.3 m/min spindle taper MT 4 MK engine output 0.9 / 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Machine from a vocational school good / well-maintained condition (!!) Equipment: - robust motor-driven pillar drill with VARIO drive (V-belt) - electro-automatic spindle feed - pole-changing motor - stepless speed adjustment (VARIO drive) - adjustable drilling depth stop - machine table with 2x T-slots * height adjustable via hand crank - 1x used machine vice - machined base plate - coolant device - connection cable + connection plug - original operating instructions

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Fedpfxotnggys Abmsft Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: used, Tenoning spindle 1 St. Number of milling agregates 5 St. Spindle diameter 50 mm Control Weinig, PC-Nexus # 2774 Weinig Unicontrol 6 with NC spindles Machine will be cleaned and completely checked before delivery ----- Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3 kW > Radial adjustment path pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser aiming light for detecting the saw section Item 2: Rounding unit horizontal below ----- > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle speed: 9,000 rpm > Max. tool flight circle: 130 mm > Axial adjustment path mechanically coupled with Crosscut saw > Adjustment path radial pneumatically controlled on/off Length stop NC controlled ----- > Length 3500 mm > Electronic length stop Item 3: Tenon and slot spindle ----- > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 3500 rpm > Tool flight circle max. 320 mm > Spindle diameter: 50 mm Fodpevu Hghofx Abmsft > Tool diameter max.: 320 mm > Motor power: 11 kW Item 4: 1. Profiling spindle (same and opposite rotation) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 7.5 kW Item 5: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, stepless adjustment, NC > Tool clamping length: 320 mm > Vertical spindle stroke: variable 254 mm, stepless adjustment, NC-controlled > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers axially pneumatic opposite the spindle controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??the synchronous spindle), Rung support bar from above in the area of ??the profile milling unit vertically on the right and profiling spindle. Pos. 6: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??9,000 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions > Radial adjustment range 125 mm, 8 positions Pos. 7: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions > Radial adjustment range 110 mm, 8-way turret > Spindle speed: 5850 rpm > Spindle diameter: 40 mm > Tool flight circle max.: 210 mm > Motor power: 3.0 kW Item 8: Profile milling unit/grooving unit from below ----- > Motor power: 3.0 kW > Tool clamping length: 125 mm > Axial adjustment range 100 mm, 8 positions > Radial adjustment range 1...

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Ffodpfx Asvvi Ttebmot Storage location: Nattheim

Condition: used, Coating system Hymmen CombiCoater ELX-S 1400 with UV dryer. Ffsdpslf H Tcefx Abmst * Technical data will follow shortly * For self-dismantling and collection.

Condition: used, VTL SC 17 CC Vertical Turret Lathe Specification: Faceplate diameter: 1450 mm Ffsdoxdcxuopfx Abmst Swing diameter: 1700 mm Turning height: 1200 mm Weight of the machine ca.: 22 t

Condition: used, machine/vehicle number: 008131, Max. panel width: 4400 mm Max. panel length: 4400 mm Ffodow Idh Hepfx Abmst Main saw blade projection: 75 mm No of Grippers: 7

Condition: used, functionality: fully functional, In this offer you purchase a used colour production system ‘Xerox iGen 5 Press’ Object of sale: 1 x Xerox iGen 5 Press with the following equipment: incl. FreeFlow Print Server incl. 2x Paperdeck YVC-2 incl. Finisher YVC-3 incl. 5th colour in orange Not the right equipment? It is no problem to configure the machine according to your wishes. Please feel free to contact us! Counter readings: Total: Approx. 15,719,744 pages Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function A test printout can be seen in the photo Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. Fsdju Ecqbopfx Abmeft For further information, you can of course also contact us personally.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Ffjdpfx Aoxvz T Ijbmjt Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Condition: The machine was operated in Germany and regularly maintained (last service by Homag in 11/2024) Features and technical data: - Workpiece thickness min.: 12 mm - Workpiece thickness max.: 60 mm - Workpiece min. (L×W): 240 × 55 mm (at 22 mm thickness) / 100 mm (at 60 mm thickness) - Edge thickness min.: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max.: 3 mm (coil material) / 20 mm (strip material) - Feed speed: steplessly adjustable 18–25 m/min (frequency-controlled) - Gluing system: EVA hot-melt adhesive - Glue application (tank / cartridge / nozzle): Melting unit with granulate hopper - Glue volume / cartridge size: Granulate hopper, melting capacity 18–35 kg/h, level-controlled - Heating time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure section: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment Fodpowx Aaqefx Abmeft - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: FK13 profile milling unit, automatic 8-position tool changer (R = 2 mm) - Bevel / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in FA11 finishing unit - Jointing unit: KAL310/A20/S2 jointing milling unit, 2 × 3 kW - Workpiece pre-heating: available - Release agent spray device: top / bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control system: power control PC22 (industrial PC, woodCommander running Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant per EU directive 98/37/EC Dimensions / required floor space: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg Please note: The return conveyor shown in the pictures is not included in the scope of delivery! Availability: short-term Location: Lithuania