DOUBLE-SIDED SQUARING MACHINE

BIESSE STREAM SB2 10.5

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control /Software SINITRA Kedpfx Aboywk Elsvoww Adjustable feeding speed (m/min ) 10 - 40 Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (1 x Kw 5,2 ca.) N°2 Hogging Units (1 Top + 1 Bottom) DT 10 (2 x Kw 5,8 ca.)+ Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge control EC40) Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-S (2 x Kw 0,3 ca.) 28 m/min (0° - 25°) Rough Trimming unit RS 10 (2 x Kw 0,75) Fine Trimming unit (Multi-profile, by N.C.) RF 30 (2 x Kw 0,37) 0°-25° Multi Function Unit (Profile contour Trimming unit) AR 30 (Kw 0,35 x 2) LEFT: 2 x Milling grooving units FB 32 (2 x Kw 5 ca.) 0° - 90° RIGHT: Milling grooving unit FB 30 (1 x Kw 5 ca.) 0° - 90° Profile Scraping unit RB 10 Glue scraping unit RC 10 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37) + Hot Air Heater (to reactivate the color of plastic tape) PH 10 OPTION: D.O.M. Unloader with load-bearing column and mobile arm (with vacuum suction cups), for unloading and stacking edged panels

Condition: as good as new (ex-display), FULL LINE of Double-side Sizing-Milling & Edge Banding. Composed of the following machines: VZ0200A) Gantry-portal Loader (Double pick-up station) "BARGSTEDT" Mod. TBH 500/D/30/12 VZ0200B) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 525/8/A3/15 VZ0200C) In-feeding Rollerway "HOMAG" Mod. TDL 310/30/12 with 90° Turning device (from lenghtwise to crosswise) with double cone system VZ0200D) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 526/10/A3/30 VZ0200E) In-feeding Rollerway "HOMAG" Mod. TDL 510/25/12 with 90° Turning device (from crosswise to lenghtwise) with double cone system VZ0200F) Cleaning machine "WANDRES" VZ0200G) Gantry-portal Stacker (Double pick-up station) "BARGSTEDT" Mod. TSP 410/D/25/12 Ksdpfxodt Rgvo Abvjww

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Kodpfx Aeu Rc Anebvoww Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: used, Double edgebanding machine BIESSE STREAM SB2 10.5 usable as 1st and 2nd machine in a edgebanding line Numerical Control with Sintra Software Machine suitable for 1st + 2nd pass of the panel Opening of the mobile shoulder motorized by C.N. mm 3000 Panel height 60 mm Kjdpfx Abou Rim Hsvjww Pvc/Abs mm 3 Continuously variable feed speed from C.N. (up to 40 m/min) Working height electronically adjustable by C.N. (up to 60 mm) Opening of the moving shoulder electronically adjustable by C.N. Motorized rubber belt with higher pressure Track with bearings with hidden pins - distance between PINS mm 500 Automatic system for supporting large panels Anti-adhesive group Part to be squared composed of (for each side): * Automatic timed anti-splinter group * Double shredder group * Two-motor grinding group Border part composed of (for each side): * Gluing unit for EVA hot melt glue with pre-melter * Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. * 6-position reel magazine with automatic edge change by C.N. * End trimming unit with 2 motors with automatic inclination * Overlapping trimming group with 2 motors * Edge trimming group with 2 tilting motors electronically adjustable by C.N. * Multifunction rounding unit with 4 motors (cornering tool + rounding tool) with numerical control adjustment automatically * Toupie Group (with 2 motors on the fixed left side \ with 1 0-90° tilting motor on the mobile right side) * Electronically controlled edge scraper group by C.N. * Glue scraper group * Oscillating brush group * Phon group

Condition: good (used), Year of construction: 1986, Sliding headstock automatic lathe STAR Type: JNC-16 Year 1986 with Fanuc OT control . Bar capacity max: 16 mm. Kwjdpfx Abevbb U Hjvow Further data see data sheets Machine documentation available .

Condition: ready for operation (used), Technical characteristics Panel width : 240 mm to 1200 mm Panel length : 240 mm to 3000 mm Panel thickness : 10 mm to 60 mm Band thickness : 0,3 mm to 3 mm Pin inner axis : 500 mm ENTRY / EXIT : Transfer realised with special chains covered in stainless long lasting rubber Entry pivoting guides adjustable depending on panel type Closing device on above pressor to assure the pressing of the panel against the pins Delaying device in entry for optimization of different width panel dimensions Kedpfx Abstrihvoveww Single part rigid structural longitudinal chassis ADVANCE CHAIN : Continuous speed tuning from 10 to 40 m/min by INVERTER CN direct numerical command The stop pins are automatically adjusted in height by CN and can have : height/thickness 12- 18-23 mm from the chain level Chain pin inner axis 500 mm BELT PRESSOR SOUNDPROOF CABINS All machining groups inside the machine are surrounded by soundproof material Internal lighting CN command placed at entry of the machine, fixed chassis side NUMERICAL CONTROL Video interface Positioning axis control Chain advance speed tuning Pressor height adjusting depending on panel thickness Automatic adjustment of band changing and band charger Moulding list management Sequenced motor startup Possibility of connection to a barcode reader Module NC410 MILLING GROUP Timed pneumatical anti shard action for transversal milling Tool rotation speed : 6000 rpm Motor power : 5.8 kW Tool Ø : 200 mm DOUBLE SUPERPOSED SPLINTERS Simultaneous displacement for thickness adjustment and independent adjustment vertical and horizontal Cast iron bearing structure Tool speed rotation : 6000 rpm Motor power : 5.8 kW Tool Ø : 205 to 250 mm EXTENSION MACHINE to 3200 mm AUTOMATIC CENTRAL SUPPORT 10.5 This device allows support of parts that due to their dimensions or thickness can subdue central bending Fully automatic activation GLUING GROUP SP3 Straight bands in resin, melamine, ABS, PVC, PP EVA basis thermoplastic glue Independent Teflon covered changeable glue tank Glue level sensor inside the tank Glue input roller speed synchronized with the chain advance Breveted pre fusion device Glue granule container (8kg) Band presence detection device Automatic band changing procedure 6 POSITION MOBILE BAND CHARGERS END CUTTING End cutting unit for edge thicknesses up to 3 mm Device for quick removal in stroke Automatic exclusion of the unit when the motors are stopped Speed : 12000 rpm Panel projection : 35 mm Edge thickness : 0.3 to 3 mm Panel thickness : 10 to 60 mm Interval between 2 consecutive panels : 350 mm WHOLESALE TRIMMING UNIT 2 superimposed motors with horizontal axis Automatic pneumatic exclusion of the group Speed : 12000 rpm Motor power : 1.3 + 1.3 kw Panel thickness : 10 to 60 mm Tool diameter : 80 mm ANGLE TRIMMING GROUP The adjustment of the position of the tool in relation to the material is automatic with predefined dimensions on 4 pre-adjustable in-line stops The in-line stops are automatically selected by the control Use on the MULTIPROFIL tool group to change profile/shape without replacing the tool Tools are equipped with 20° chamfer and 1.5-2-3 mm radius Speed : 12000 rpm Motor power : 0.65 + 0.65 kw Panel thickness : 10 to 60 mm TOP / BOTTOM ROUNDING GROUP Rounding copier for the upper and lower stops of the panel with oscillating movement for the continuation of the panel Quick release system of the motor-holder groups Automatic exclusion of the tool with stopped motors Tool rotation speed : 12000 rpm Motor power : 0.3 kw

Condition: excellent (used), CATALOGUE NUMBER: 6904 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 6 spindles: 1) Bottom horizontal: 230 mm, 5.5 kW 2) Right vertical: 130 mm 3) Left vertical: 130 mm (spindles 2 and 3), 7.5 kW 4) Top horizontal: 230 mm, 5.5 kW 5) Bottom horizontal: 230 mm, 5.5 kW 6) Universal: 230 mm, adjustable 360°, 5.5 kW - All spindles adjustable up/down, right/left - Spindles 1, 2, 3, 4, 5 equipped with electric brake - Spindle diameter: 40 mm - 5 top infeed, toothed feed rollers - 4 top outfeed, smooth rubber feed rollers, including 2 double rollers - 1 bottom rubber feed roller - Feed via Kardanic shafts - Pneumatically pressed rollers - Stepless speed feed adjustment Kedpfx Ajx Rq Iyobvsww - Feed motor: 4 kW - Operating pressure: 6–10 bar - Electric thickness adjustment - Lifting motor: approx. 0.55 kW - Central table lubrication - Infeed table length: 1970 mm - Extraction ports: 2x140 mm, 4x135 mm - Dimensions (LxWxH): 4430x1830x2000 mm - Weight: approx. 3500 kg ADVANTAGES – German-made, WEINIG brand – 6-head (moulder) – Complete technical documentation (DTR) – Universal spindle – Used planer/moulder, very good condition Net price: 82,900 PLN Net price: 19,738 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, machine/vehicle number: 007354, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 240 mm Max feed speed: 40 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr Ksdjyg Edaspfx Abvjww