Lead/traction spindle lathe

Boley 6 LZ

Condition: good (used), Year of construction: 1974, LZ-Lathe Fabr.Boley Type: 6 LZ Year 1974 Center height : 140 mm center distance : 500 mm spindle speed : 28-3550 rpm spindle bore : 32 mm Isdpfoqw U Uwox Addeht collet chuck device, 3-jaw chuck, quick-change tool holder Parat. Machine documentation available, machine can be demonstrated under power.

Condition: good (used), Bar loader LNS ECO LOAD Ihjdpfx Aslg Aq Asddjt

Condition: excellent (used), Year of construction: 1992, L & Z Lathe (used) Manufacturer: Boley Model: 6 LZ AUT Year of manufacture: 1992 Center height: 140 mm Distance between centers: 500 mm Swing over bed: 270 mm Ihsdpfxsw N Rp To Addet Swing over cross slide: 160 mm Spindle bore: 32 mm Speed range: 28 – 3550 rpm Tailstock taper: MK 3 Quill travel: 80 mm Main spindle motor power: 1.4 / 2.2 kW Machine weight: approx. 1,050 kg Space requirements: approx. L 1,600 mm x W 1,000 mm x H 1,450 mm Quick-change tool post system Multifix size E incl. insert Chip tray Chip guard/rear splash guard Chuck guard Machine lamp Including collets - see images 3-axis Heidenhain digital readout Coolant unit The machine is in excellent condition and ready for immediate use. Forklift available, free loading onto truck Affordable shipping possible Machine location: 59510 Lippetal

Condition: used, bending length: 3100pressure: 80motor power: 5,5oil filling: 100 Iedpfx Adoru Unbsdeht

Condition: excellent (used), Year of manufacture: 1991 Model: ITPS III Serial number: ITPS 80C 25 P1C226 Maximum pressing force: 1800 kN Working stroke: 115 mm Power supply: 415 V, 50 Hz, 3 phases Rated current: 119 A Installed power: 18.5 kW Machine weight: 4940 kg Isdpswq Dpqofx Addeht Inventory number: 9.14 Control: Delem DA-65R The machine starts up, but the control unit does not respond to commands. The previous owner replaced the original AMADA control with a DELEM unit.

Condition: as good as new (ex-display), Year of construction: 2013, operating hours: 1,265 h, functionality: fully functional, spindle speed (max.): 20,000 rpm, turning diameter: 4 mm, Equipment: documentation/manual, rotational speed infinitely variable, Citizen R-series of automatic lathes dedicated to small-diameter machining. This machine is used very little (15800 parts cut). model year 2013. Ihsdpfsvtancox Addet With ASP-04 barfeeder. VAT is not needed if the sales happen outside of Turkey.

Condition: like new (used), Year of construction: 2024, Teschniche data: Sheet length 4,100 mm sheet thickness 6 mm width of the stand - mm Total power requirement 15 kW weight approx. 11,5 kg Dimension (LxWxH) 5250 x 2300 x 22150 mm Ihedpsh Ib T Uefx Addst Backgauge 1000 mm D-Touch 7 touch screen CNC control, user friendly Central cutting angle adjustment Ball screw, 1000 mm & automatic swivel open Support balls in table for better material handling Side stop with scale & T-slot and tilt stop Support arms with T-slot and tilt stop Cutting line illumination & 1 m hinged finger guard High performance hydraulic and electronic components Automatic pressure adjustment Pivoting backgauge Cutting line illumination Foot pedal CE standard for EU The machines can be inspected and demonstrated at any time by appointment in our demonstration center in Staufenberg. Further machines are ready for demonstration at our site in Staufenberg. We will be happy to provide you with further information on request.

Condition: like new (used), functionality: fully functional, Weiler center lathe model Condor B lead and feed spindle lathe with 3-axis digital readout from K&C NEW Geometrically overhauled with acceptance certificate for tolerances of new machines !!! Iedovambcopfx Addeht Technical data: >> Machine no. 90-1495 >> Center height 165 mm >> Center width 750 mm >> Spindle speed : from 22 to 2800 rpm >> Spindle clearance 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.015 to 0.46 mm /rev >> Possible threads metric, inch, module and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake can be activated >> Length 1.83 m, height 1.29 m, depth 0.88 m Accessories and equipment: >> 3-axis digital readout from K&C New , 12 months manufacturer's warranty with operating instructions Functions : Switching mm/inch , Coordinate selection ABS/INC , Halving of the display value , Reference mark , Tool programming 200 pcs. , Cone calculation , Radius / diameter , Quick zeros , Switching the counting direction , >> Collet chuck device, collets NEW from 3 to 26 mm 1 mm increasing >> Three-jaw chuck 160 mm with 2 sets of jaws NEW >> Mulifix new size A with 2 steel holders new >> Bed stop >> elec. Chuck guard NEW >> Machine lamp LED New >> Rear panel >> Operating instructions >> Coolant device >> Machine feet To the machine : We are offering a Weiler Condor B lead and feed spindle lathe in a geometrically overhauled condition, absolutely as good as new. The guides are newly ground and scraped. With acceptance according to test protocol. A very nice machine with electronic spindle protection. The accessories collets, chuck, Multifix are new. Spindles, spindle nuts, bearings, belts, wipers have been renewed. Take the opportunity to inspect this machine on site under power and see the condition for yourself.

Condition: good (used), Year of construction: 2002, From company liquidation: Peddinghaus Peddimax 1002 Year of manufacture 2002 Max. Punching and shearing capacity: 1000 kN Punches 31 mm holes in 25 mm steel Shears on the flat steel shear to 500 mm up to a material thickness of 18 mm steel Contact length stop Many accessories (special punches) Special punching device SV 90 up to 90 mm holes Ihodpfxst Iklkj Addjt Weight: approx. 3,000 kg

Condition: new, Pressure capacity 40 t Folding length 1270 mm Clearance between the uprights 980 mm Projection 200 mm Installation height 320 mm Stroke 100 mm Working speed 10 mm/s Drive power 4 kW Dimensions L x W x H approx. 1950 x 1450 x 2100 mm Weight approx. 3200 kg Accessories / special features: - Manual operation for the motorized plunge depth and the backgauge o Ball screw spindles o Fine adjustment via handwheel - Top tool PM 1, consisting of 1 x 835 mm and 1 x 435 mm, slightly cranked, R=0.8 mm, pressure load 100 t/m, tip 88° - Universal die 50 x 50 mm with several V-openings - Back gauge with ball screws, length = 600 mm - Only one working speed 10 mm/s for all vertical movements, therefore no light barrier is required! - Front support arms - Suspended control panel - Paint finish: dark gray RAL 7031, light gray RAL 7035, yellow RAL 1033 - Operating instructions - CE-compliant Delivery time: approx. 2-3 months after receipt of order plus pre-freight costs China - Germany Ihodpfx Adegiud Hsdot Exclusive representation! Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel