2012 Brandt KDF 670

Brandt KDF 670

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: 0-261-07-1735, functionality: fully functional, operating hours: 4,600 h, input voltage: 400 V, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, feed rate X-axis: 14 m/min, total height: 2,100 mm, total length: 6,900 mm, total width: 1,200 mm, overall weight: 3,500 kg, Equipment: documentation/manual, Name: BRANDT KDF 670 Highflex – edge banding machine Manufacturer: BRANDT Type: KDF 670 Highflex Year of manufacture: 2005 Machine available from: 2026-11-20 Machine condition: good Location: Kielce, Poland Technical data: Edge thickness: 0.4 - 12 mm Workpiece thickness: 8 - 60 mm Feed rate: 14 m/min Pre-milling unit: 2 x 2.2 KW Gluing unit: Quickmelt Edge magazine: for 1 roll Trimming unit: 2 x 0.35 KW Rough milling unit: 2 x 0.55 KW Profile milling unit: 2 x 0.55 KW Corner milling unit (copying): 2 x 0.35 KW Flat scraper (glue scraper): yes Radius scraper (profile scraper): yes Polisher: yes Control: PC16 Total power approx.: 15 KW Overall dimensions approx. (L x W x H): 6900 x 1150 x 2050 mm Weight approx.: 3500 kg Features: Software-controlled adjustment of the infeed fence Extension of the infeed fence by 300 mm Motorized adjustment of the upper pressure roller height Software-controlled adjustment of the pressure zone Automatic edge feeding Anti-adhesive spray Pneumatic adjustment for trimming at an angle/straight Gjdpfx Ao Adzmzjanobw Pneumatic adjustment of the milling unit Software-controlled adjustment for edge thickness The machine has operated for very few hours – approximately 4600 (the computer disk was replaced after 2600 operating hours)

Condition: used, Automatic sharpening machine Vollmer, model CHC 21 H; minimum and maximum width of bandsaws: 65–200 mm, tooth pitch: 12–80 mm, minimum tooth height: 5 mm, set per side from 0.3 to 1.5 mm, power: 0.55 kW, estimated machine weight: 550 kg, year: 1981, serial no. 364 Gsdpfey Swlusx Aanobw

Condition: good (used), Year of construction: 2006, - Infeed fence: manually adjustable - Jointing milling unit with 2 motors, each 2.2 kW: both motors pneumatically controlled - Hot-melt adhesive application - Pressure zone: with 1 main pressure roller and 3 follow-up pressure rollers - End trimming unit with 2 motors, each 0.35 kW: automatically adjustable via program from chamfer cuts to straight cuts - Edge milling unit with 2 motors, each 0.55 kW: for flush milling, bevel milling, or radius milling with 4-point fixed position adjustment for side tracing - Groove milling unit: with horizontal spindle - Copy milling unit with 2 motors, each 0.35 kW: with pneumatic infeed and outfeed control - Profile scraper unit: with pneumatic infeed and outfeed control - Flat scraper unit Godpfx Aaey Av A Hensbw - Buffing unit

Condition: used, Edge banding machine Brand: Brandt Model: Profiline KDF 670-C Hiflex Single-sided edge banding machine in right-hand design, for hot melt gluing. Gsdpfxjynhwfs Aanebw Quick-change gluing unit for hot melt glue. Processing with PU glue granulate possible in accordance with glue specifications. Leak-proof glue reservoir under the glue roller. Precise glue application to the workpiece with glue roller, no adjustment of workpiece thickness necessary. Glue roller with selectable rotation direction for counter or forward feed. Glue temperature monitoring via electronic thermostat. Automatic reduction of glue temperature during work breaks. Infrared heating for hot melt reactivation. Automatic edge banding magazine for roll material and fixed lengths, including roll plate with a diameter of 800 mm and reinforced cutting shears for thick PVC/ABS, max. 3 x 45 mm. Standard equipment with edge banding and workpiece – distance monitoring with optical display. Stable pressure zone with driven, compressed air-loaded main pressure roller and 3 free-running post-press rollers. Standard equipment with automatic central lubrication for the transport chain. Motor-driven adjustment of overpressure. Control panel at the machine infeed. Technical data Edge strip thickness: 0.4 – 12 mm Cutting tool: max. 3.0 x 45 mm or 0.8 x 65 mm Workpiece thickness: 8 – 60 mm Feed speed: 11 – 16 m/min (see below) When selecting edge banding thicker than 3 mm, the feed speed is automatically switched to 14 m/min. automatically to 14 m/min. When selecting form cutters, the feed rate is automatically switched to 11 m/min. Electrical connection: 400 V, 3-phase, 50 Hz Compressed air connection: 6 bar Connected load approx. 17 kW Machine length: 6,860 mm Full information about the machine can be found on our webpage burbagemaskin.se

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edging: between 8 and 60 mm; edge thickness up to 8 mm depending on the unit. Components: - calibration, - edge feeding, - gluing, - end trimming, - milling group; flat or profiled milling of upper or lower edges, - profiling milling unit, - scraper group, - polishing station. Pressure bridge, infeed stop, control panel. Year: 2017. Refurbished in our workshop and inspected by a HOLZHER technician. Fitted with new diamond tools. Gjdpfjytp Hrex Aansbw

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: A3347169, functionality: fully functional, number of axes: 3, CNC machine SCM, Record 100 AL action line, 3-axis woodworking line, 400V, year of manufacture 16/07/2008, electrical cabinet, control with safety mat, partition wall, working area 305 x 122 cm, total machine dimensions: approx. 565 x 250 x 260 cm, self-dismantling required 3 axes In perfect working condition 1 large vacuum with details of white panel and 1 small vacuum: Year 2019 / N°A3347169 Type VTLF2.250/0-79 Godjxg El Ajpfx Aanobw Frequency 50/50Hz Speed 950/1150min-1 Power required 5.5/6.4kW Inlet capacity 244/286m³/h Max vacuum 200/200mbar Video available.

Condition: used, machine/vehicle number: 007848, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Maximum panel thickness: 60 mm Godjwkrqpspfx Aanobw Operating Units: 8 nr

Condition: used, Year of construction: 2008, Panel dividing saw Manufacturer: Holzma Godpfx Aezuy N Eoansbw Type: HPP 350/43/38 Year of manufacture: 2008 Technical data - Control system: CADmatic 4 - Optimization program: CAD-Plan 4 - Saw blade overhang: 80 mm - Saw carriage feed rate forward/backward: 1-150 m/min / 150 m/min - Feed rate of the program cut forward/backward: 90 m/min / 90 m/min - Main saw motor: 13.5 kW - Scoring saw motor: 2.2 kW - Working height: 920 mm - Main saw blade: 350 x 4.4 x 60 mm - Scoring saw blade: 180 x 4.4 - 5.4 x 45 mm - Cutting length: 4300 mm - Cutting width: 3700 mm - Label printer Pica 108 - Processing package for gypsum fiberboards - Annual maintenance and inspection by Homag - New PC in 2021 (Win10) and updated machine control software and CadLink Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, machine/vehicle number: 005108, Position 1: Front-Loading Panel Saws HOLZMA-HPP 380/43/43 + TLF Gbsdpfx Aewuck Ieanew Position 2: Horizontal Storage Systems HOLZMA-HPP 380/43/43 + TLF

Condition: excellent (used), Year of construction: 1997, Single shaft shredder form Weima Model -WL6S Godpfx Aaoivpthonsbw Main motor -22kw