Conventional lathe

CONTUR SJ-520/1000 VS

Year of construction: 2021, condition: refurbished (used), Refurbished DIAFORM unit f. JUNG HF50 / JF 520 Iedpfx Ashcn R Iodiea

Condition: new, Bernardo Center and lathe master 180 incl. 3-axis digital display Top width 1000 mm Tip height 180 mm Swing over bed 360 mm Swing over bend * 480 mm Swing over cross slide 220 mm Bed width 185 mm Spindle bore 51 mm Spindle mount DIN 55029, D1-5 Speed range (8) 70-2000 RPM Range of longitudinal feeds (32) 0,052-1,392 mm / Rev Area plan feeds (32) 0.014 - 0.380 mm / Rev Metric threads (26) 0.4-7.0 mm Inch thread (34) 4-56 Gg/1 " Quill diameter 42 mm Quill trail 110 mm Spindle mount MT 4 Iodpfxod Du Tio Adija S1 engine power output 100% 1.5 kW (400 V) Motor power S6 40% 2,2 kW (400 V) Machine dimensions (W x D x H) 1920 x 750 x 1600 mm Weight approx. 540 kg Bed length removable: 225 mm Scope of delivery • 3-axis digital display i200 with LCD display • 3 - jaw Chuck DK11-200 mm / D5 • Face plate 200 mm / D5, according to DIN 55029 • Fixed bezel - forward diam. maximum 70 mm Diam bezel with • ongoing - forward. maximum 50 mm • Coolant system • Initial filling with Shell Tellus 46 • Pull-out chip tray • Face plate 320 mm • Four-way steel bracket • protective device while the four-way tool post • Slipping clutch • Mikrometerlängsanschlag • Thread watch • LED machine luminaires • Reducing bushing • Change gears • 2 centres • Foot pedal with brake function after CE • motor with magnetic brake according to CE standard • base

Condition: as good as new (ex-display), functionality: fully functional, turning diameter over cross slide: 240 mm, spindle bore: 58 mm, turning diameter over bed slide: 430 mm, center height: 215 mm, turning length: 760 mm, quill stroke: 127 mm, quill diameter: 58 mm, total length: 1,885 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,680 kg, quill mount: MK 4, Tip height: 215 mm Center width: 760 mm Spindle bore: 58 mm Spindle nose according to DIN 55029 Camlock D6 Motor power: 5.5 kW Spindle speed range: 20-2000 mm Weight approx. 1680 kg Equipment including Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and face slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates Ijdpfxocir Ane Adisa

Condition: used, turning diameter over bed 250 mm turning diameter over slide rest . mm centre distance ca. 400 mm centre height ca. 125 mm turning speed range 80 - 3000 U/min number of speeds 18 spindle bore 24 mm Ijdpswa Dz Esfx Adija tailstock quill taper MT 3 weight ca. 400 kg dimensions ca. 1200 x 650 x 1300 mm 4-jaw-chuck diameter 125 mm including Röhm four-jaw chuck, Ø 125 mm incl. drilling and turning jaws; collet chuck device incl. collets 1-20 mm with 1 mm gradient Multifix size A with 3 interchangeable holders; chuck protection with shutdown

Condition: new, Cardan shaft balancing machine BVI-03-74 Available in stock in Poland !!! Delivery time: one day!!! . . Machine for driveshafts weighing up to 150kg and up to 4700mm long. Suitable for small workshops with a large range of different shafts, including trucks. This balancing machine has high productivity and serves to balance the cardan shafts of cars and trucks. It makes the process of balancing the cardan shaft easy thanks to many technical solutions, while the machine has an affordable price, which reduces your financial burden and allows you to develop your business effectively. . . TWO TIMES faster than your machine. This balancing machine is majored to balance the shaft not only qualitatively, but also quickly. If you can balance in 2-2.5 times faster, then this is your real competitive advantage. . . HIGH PERFORMANCE ACCESSORIES The machine is equipped with three main types of adapters: 1. Fast clamping universal adapters. It has two main advantages: The first is that due to the special design the driveshaft flange is clamped within 5 seconds. This advantage is due to the fact that the driveshaft flange does not need to be fixed with bolts. THE SHAFT CAN BE CLAMPED 4 TIMES FASTER WITHOUT BOLTS. The second advantage is the centering rings. The driveshaft is mounted in the adapters with centering rings that can be made on an ordinary lathe to fit most common driveshafts. 2. KV Flange adapters. Used for balancing shafts with cross-tooth flanges. Applies to four flange sizes: 120, 150, 180, 205 mm. Usually used on truck driveshafts. 3. Adapter with slots. Used to mount various flanges with holes. Mounting the driveshaft is the same as on universal adapters, with the help of centering rings. Isdspbv Tfopfx Adioa KEY FEATURES • Balancing of 2, 3 and 4-support cardan shafts • Shaft length up to 4700mm, weight up to 150kg • Cardan installation in 1 minute • Standard set of adapters - Installation of 80% of cardan shafts; • Three ways of fixing the center bearing • Soft-bearing type machine - high sensitivity to any vibration • Machine is operated by one worker • Sliding bearing supports - quick changeover, comfortable operation • Safety bracket with clamp for quick installation • Measurement in all planes at one time • Calibration of the machine by the operator • Displays imbalance in real time • Create and print reports SPECIFICATIONS Maximum cardan shaft weight 150 kg Maximum flange diameter 300 mm Maximum length of cardan shaft 4700 mm Number of machine supports 4 Number of simultaneously measured planes 2, 3, 4 Minimum achievable residual specific imbalance, 10 g mm/kg Rotor speed range 1000-2000 rpm Power supply 380V, 3 Ph, 50Hz Power, minimum, 2,2 kW Dimensions (length x width x height) 6000 х 1100 х 1450 mm Weight 700 kg ! We manufacture а full range of equipment for drive shaft balancing and repair service. Please contact us to get the best offer!

Condition: new, New lathe with large spindle bore. Brand : KMS Type : CS6250C TDC : 1000mm Turning diameter over bed : Ø 500 mm Turning diameter over slide : Ø 300 mm Turning diameter in bag : Ø 710 mm Turning length in bag: 240 mm Bed width : 390 mm Spindle diameter : Ø 105 mm Spindle speeds : 12 (36 - 1600 rpm) Tailstock spindle diameter : 75 mm Tailstock range : 150 mm Tailstock recording : MC 5 Machine dimensions : ± 2630 x 975 x 1270 mm (L x W x H) Machine weight: ± 2100 kg Machine equipped with: - Longitudinal and transverse feed. - Rapid traverse on longitudinal and transverse feed. - Movable and adjustable stops for automatic longitudinal feed. - Thread cutting shaft (Metric/Inch/Module/DP thread cutting possible. - Multifix type quick change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, bore 100 mm (Camlock). - 4-jaw chuck Ø 400, bore 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). Ijdpfx Adjhhm Edeioa - Steady rest Ø 120- Ø 260 mm. - Follow rest Ø 20 – Ø80 mm. - Coolant device.

Condition: new, WM180V - ROGI vario metal lathe 230V-1Phase Turning diameter above bed ----- 180 mm Turning diameter above cross support ----- 110 mm Center height ----- 90 mm Center distance ----- 300 mm Bed width ----- 100 mm Cross support travel ----- 75 mm Reverse motion of tool support ----- 55 mm Permeate main axis ----- 21 mm Iodpfx Asga T Ebsdiea Main shaft connection ----- MK3 Speed range spindle ----- variable 50 - 2500 rpm Thread cutting withworth ----- 10 - 44 TPI (8) Thread cutting metric ----- 0.5 - 3 mm (10) Travel pinole ----- 60 mm Diameter pinole ----- 30 mm Pinole fitting ----- MK2 Motor power ----- brushless 600 Watt Weight ----- 60 kg STANDARD ACCESSORIES * 3 chuck 100 mm - self-centering * 4-way chisel holder * Drip tray * Back panel * Shielding chuck * Shielding spindle * Chisel support shield * Set of casters * Digital speed readout * Fixed centers * Left / Right switch * Tools in a box OPTIONS * Independent 4-jaw chuck 100 mm * Flange for 4-jaw chuck 100 mm * Fixed glasses * Moving glasses * Fixture plate 170 mm * Support box * TOOA0 quick-change chisel holder * Rotating chisel set

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened -Turning length: 3800 mm -Turning Ø over bed: 720 mm -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm Ijdpfjwrfkfex Adisa -Weight: 7500 kg

Condition: excellent (used), Year of construction: 2007, Machining center - vertical Manufacturer: Hyundai KIA Modell: VX380TD Year of c.: 2007 Isdpfx Adeiw Ekdsioa Control unit: Fanuc Series 01-MC Spindle speed range: 12000 rpm Power consumption: 7 kva Type of tool holder: BT30 Slots in storage: 20 X-Axis movement: 500 mm Y-Axis movement: 350 mm Z-Axis movement: 350 mm Weight: 5000 kg

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Ijdpfev Rnfqox Adisa