Horizontal Boring Machine

Cornac C100

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Kedoyhhuwspfx Agnjlt Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system. Kedjtv H Ucopfx Agnolt

Condition: used, fuel type: diesel, Manufacturer: CATERPILLAR Type: V 250 Capacity: 12000 kg Kedpfjc Urcijx Agnslt Lift Height: 3710mm Boom height: to insert moulds of fork length: 1400mm width: 2550mm Overall length: 6400mm

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, conveyor belt width: 615 mm, warranty duration: 12 months, total width: 3,800 mm, total length: 1,078 mm, total height: 1,220 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 03/2028, electrical fuse: 16 A, opening width: 30 mm, NEW +++ Rondo Rolling Machine +++ NEW ECO Model: SSO 617 Simple manual operation Suitable for all doughs for rolling and laminating Tables fold up Rolling thickness from 0.5 to 30 mm Simple, robust technology Table length 3320 mm Mobile dough sheeter Only available from us: DGUV V3 tested Dimensions: 1072 x 3800 mm (in operation) Klodpfx Agettrxzjnet 1072 x 1630 mm (at rest) Connection 400V, 16A CEE plug New machine SAB certified With warranty + spare parts service Options: - Leasing & rental service - Maintenance contract - Delivery service - E-Box - Service package - Training & commissioning Many more dough sheeters in stock!

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device Ksdolhwr Rspfx Agnslt - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: good (used), Year of construction: 1997, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Klodjrmkfnspfx Agnst Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights Klsdjvm Eixjpfx Agnet TOTAL WEIGHT: KG. n.d

Condition: new, Machine type: Standing Dough Sheeter Material: Full Stainless Steel Belt size: 630 x 2400 mm Expanded: 3100 x 1100 mm Klsdpfeuug S Tsx Agnst Folded: 760 x 1720 mm Dimensions: 3100 x 1060 x 1100 mm Roller adjustable gap: 1-38 mm Max rolling capacity: 6.5kg/time Electric power: 0.75 kW - 380 V Weight: 260 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, pressing force: 1,000 t, table width: 1,500 mm, distance table to ram: 1,750 mm, total length: 2,700 mm, Used 1000ton hydraulic press for sale 1000TON PRESS SIDE FRAME Max Ksdpfoucdgpjx Agnslt TYPE CAPACITY 1000ton PRESSURE 175kgf.cm2 STROKE 1000mm DAYLIGHT 1750mm BOLSTER AREA 2700mm x 1500mm PULL BACK CAPACITY 52.7ton DIE CUSHION CAPACITY 50ton DIE CUSHION STROKE 180mm MAIN MOTOR 415v 50hz 6p 110kw OIL TANK CAPACITY 1800L

Condition: good (used), functionality: fully functional, Original CNC (not a retrofit from conventional to CNC) Control: Siemens 8-M Faceplate diameter: 3500 mm Max. turning diameter: 4000 mm Max. turning height: 2500 mm Vertical stroke of ram: 1600 mm Horizontal stroke of ram: 2200 mm Ram cross-section: 250 x 210 mm Min. internal diameter: 360 mm Vertical travel of cross-slide: 2000 mm/min Chuck motor power: 71 kW Chuck speed: up to 90 rpm (2-speed gearbox) Table load capacity: 40 tons Klsdpfxsxyh Hvj Agnjt Feed rate: 1000 mm/min Rapid traverse: 6000 mm/min