Roller coating machine / oil application machine

Cosma RC 400

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production - transverse aggregate so-called sergeant Guodpfxsgr Er Se Agpoi - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: excellent (used), Year of construction: 2012, Cutting range round: max. 530 mm Cutting range square: max. 530 x 520 mm Saw band dimensions: 7,000 x 54 x 1.6 mm Gsdewvtckepfx Agpeui Cutting speed: 10 - 110 m/min Drive power: 7.5 kW Weight: approx. 4.5 tons

Condition: used, Motor 6 / 7.5 kW Guedpew Enw Iofx Agpoi Location: Nattheim

Condition: new, Year of construction: 2024, functionality: fully functional, working width: 600 mm, brushing unit diameter: 150 mm, height adjustment type: electric, working height: 300 mm, power: 5.5 kW (7.48 HP), Brushing machine Houfek Twingo 600 BB 400V/50Hz, 2x5.5 HP (4 kW), width 600 mm Basic equipment: 1.1 Motor 4 kW (5.5 HP) per B-unit 1.2 Tool turning diameter 120-300 mm, working length 600 mm 1.3 Independent height adjustment of the working units 0 - 300 mm 1.4 Fixed table h=900 mm 1.5 Expansion shaft D=40 mm 1.6 Two rubberized pressure rollers on the work unit, height-adjustable 1.7 Electric stroke of the work unit(s) + scale with unit height indicator 1.8 Two feed belt speeds 4.5/9 m/min - replaced by P81 10 1.9 Brush protection cover 1.10 Suction nozzle diameter for unit B and Q D=120 mm 1.11 Machine is not equipped with the tool for 2nd unit 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards Additional equipment installed in this machine: - 2x motor 5.5 kW 7.5 HP - Automatic feed belt centering - Frequency converter for feed belt speed 3 - 15 m/min Gedpfou Rnb Njx Agpeui - Oscillation for one brush unit with the possibility of switching off - 2x return of the main motor (1 unit) (synchronous and counter-rotation possible on both units)

Condition: used, Year of construction: 2006, cutting diameter / mm saw band length / mm table height / mm BEHRINGER band saw in very good condition with heavy-duty roller stand, loadable up to approx. 50 tonnes. The machine is equipped as standard with infinitely variable cutting speed control, so that universal sawing of all materials with low and high strength is achieved. Type HBP650-1204A Machine number 706537 Year of construction 2006 Dimensions 10,000 x 67 x 1.6 m Working range round 20 - 650 mm Working area square min. 20 x 20 mm Working area square max. 1,200 x 600 mm Cutting speed 10 - 110 m/min. Remaining piece length automatic mode approx. 90 mm Remaining piece length manual approx. 10 mm Motor power saw drive 9.2 kW Gujdpeuia Rkefx Agpei Motor power hydraulic pump 5.5 kW Voltage 400 V, 50 Hz Connected load approx. 16 kW Current consumption approx. 33 A Material support height 800 mm incl. documentation

Condition: new, Year of construction: 2025, Working width: 400 mm Working height: 300 mm minimum workpiece length: 250 mm aggregates: 2 brush units separately adjustable Gedoi Hpk Uspfx Agpjui 1. brush: scotch brite medium / diameter 220mm, vario drive 2. brush : Scotch Brite Hard / diameter 220mm, Vario drive Height adjustment: Handwheel Height indication: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 3 kW / both with Vario drive (infinitely variable) Motor power feed: 0.37 kW Machine length: 1400mm machine width: 900mm Weight: 500kg

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, total length: 2,000 mm, total width: 1,250 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, power: 40 kW (54.38 HP), saw blade diameter: 450 mm, workpiece width (max.): 300 mm, workpiece height (max.): 30 mm, air pressure: 6 bar, extraction connection diameter: 200 mm, hone diameter: 125 mm, number of spindles: 2, MARINUS PROMAX - Endmatcher and defect saw. The machine is according to following specifications: - Stable and heavy construction, dimensions LxDxH = 2080x1260x2000 mm. - Continuous feeding system with accurate positioning (servo). - Pneumatic sidepushers for guaranteed square angle. - PLC-steering. - Operating by terminal. - Modem for programming at distance. - 2 servomotors for maximum dynamics. - 2 sawingmotors (3,0 kW). - 2 high-speed millingmotors with inverter (7,5 kW each /200 Hz/n=12.000). - 1 motorgearbox with inverter. - 2 drummotors. - 26 pneumatic cylinders with valves. - 1 luminescence-sensor - 6 inductive-sensors - Bandconveyor for waste, height 1,3 mtr. - Machine completely closed by safety-doors. - Machine according to CE-requirements. Length-measuring system: A lenght-measuring-system displays the total lenght and square meters of the boards on the display during production. Tooling: We can offer tooling (tongue and groove) with disposable knives and 2 crosscutsawblades as an option for the Guedpfx Agoq Auhdopji machine. Standard Programming: The machine is equipped with 2 main programs: 1 Endmatching 2 Cutting Both main programs have 2 sub programs: 1. Variable lenghts: defects are cut out, endproducts are of all variable lenghts. 2. Fix lenghts: boards will be produced at a fixlenght, infeedlenght has an oversize of max +200 mm. Cutting out defects is not possible. - Min. Width 60 mm - Max. Width 300 mm - Min. Length 500 mm - Max. Length 6000 mm - Min. Thickness 10 mm - Max. Thickness 30 mm

Condition: new, Year of construction: 2023, Working width: 600 mm Working height: 280 mm Minimum workpiece length: 250 mm Units: 2 brush units centrally adjustable and each with individual fine adjustment Diagonal brush technology: Yes, infinitely adjustable from -7° to + 7° 1st brush: Metal brush diameter 220mm 2nd brush: Tynex brush, grit 80, diameter 220mm Height adjustment: electric Height indicator: mechanical counter Feed speed: 4 - 12 m/min Motor power brushes: 2 x 4 kW Motor power feed: 0.37 kW Gjdpfemftk Ajx Agpjui Machine length: 1.5m Machine width: 1.5m Weight: 700kg

Condition: new, Main features of the machine: The TOP CUT 500 bandsaw offers high quality features and great opportunities, especially for companies, woodworking on various scales. The machine provides unparalleled stability and solidity. Guedpfx Agsiim Tqepji -touch panel with electronic display of cutting height -Control panel on the front of the machine for easy and convenient operation - electronically controlled and programmed cutting thickness - cutting unit lifted on two motorized pistons - feeding and return belt driven by a hydraulic variator -hydraulic cutting band tensioning system -pneumatic lubrication of the cutting band -Pneumatic system of pressure rollers ensures the accuracy of guidance -stable, steel construction of the machine guarantees precise work -accuracy and repeatability of cutting up to 0.01 cm Technical data: Maximum dimensions of the workpiece: 520x300 mm Transport belt width: 495 mm Transport belt length: 5535 mm Max cutting height: 300 mm Minimum element height: 5 mm Saw band diameter: 711 mm Saw wheel width: 45 mm Extraction port diameter: 100 mm Feed speed: 0 - 13 m / min Saw dimensions: 5200 x 35-55 x 1.6 mm Voltage: 380V Main engine power: 18.5 kW Total power: 21.5 kW Weight: 2400 kg Dimensions: 2800x2400x2000 mm

Condition: excellent (used), Year of construction: 2023, 5-axis working center with edgebanding unit. Machine as new, only few hours of running. Includes aggregates for cutting and finishing the edge R1, R2. Router liquid cooled Drilling head Two rotary tool chargers, linear tool charger. Automatic bench. Chip conveyor. Guodpfxoxcp Iys Agpoi More technical data will be updated soon.