Table spot welding machine

DALEX PMS 10-4 T

Condition: refurbished (used), Year of construction: 2026, Power at 50%: 16kVA Short circuit-current: 20,7kA Electrode force: 65-390daN / single stroke Throat depth: 200mm --- Weld control: MPS 10 (5-times, 8-program) Gujdpfx Asy Ez I Hsgpeb --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), functionality: fully functional, Timesavers 22 Series 1100-WBB 1st Station: Abrasive belt for pre-grinding, ideal for removing burrs, laser scale, etc. Optionally, the abrasive belt can be switched to a Scotch-Brite/non-woven belt to achieve a surface finish on the parts. Easy belt change in under a minute thanks to quick-change system. The belt speed is continuously adjustable. 2nd & 3rd Station: Disc brushes for edge rounding, two stations in sequence with both left and right rotation for optimal results. Eccentric mechanism enables lateral oscillation of the disc brush stations (can be switched on or off). Easy brush change using the quick-change system. Disc brush speed is continuously adjustable. Conveyor belt speed is steplessly adjustable. Guedex Uwlajpfx Agpeb Working width: 1100 mm Maximum part thickness: 100 mm The machine is fully operational and can be inspected and tested under power on site.

Condition: excellent (used), Capacity 2000 x 4 Overall dimensions 3000 x 2000 Rear sheet support Godsuml R Eepfx Agpoub

Condition: good (used), Year of construction: 2007, machine/vehicle number: 05542, Offer 25128 Technical data: - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 68 kVA - Reach adjustable: 280 to 450 mm - Stroke: 5 to 40 mm - Welding values: sheet steel approx. 3 + 3 mm Guedpfxewn Emls Agpeb - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water quantity: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - with: - Single-phase control T 90 Mark II - E. foot switch - Separate cooling water recooling device

Condition: excellent (used), Hand-operated, water-cooled spot welding gun DALEX Type A 3119 with double-stroke mechanism and short-stroke latch Short stroke 25 mm – long stroke 57 mm with electrode force switch and secondary transformer for current monitoring Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Gsdpfx Agjg Ew H Nepjub Arm gap: 120 mm Arm reach: 250 mm with synchronous welding control RS 11-2 Main switch, connection cable, and 16 A CEE plug Extensive range of water-cooled electrode arms in stock

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, Laser cutting 569 working hours Last technical revision: 10.02.2023 6000W fiber laser source with cooling module Max length: 3048mm Max width: 1524mm Z axis: 100mm Maximum sheet weight: 750kg Maximum cutting thickness Mild steel: 25mm Stainless steel: 20mm Aluminum: 20mm Copper 8mm Comes with software: PARTS.L - production management ADDIN.SOLIDWORKS - integration between Solidworks and streamlaser Gjdjmzbkrjpfx Agpsub STREAMLASER - CAM and Nesting VALUES.L - production cost estimate Computer with Intel Xeon W-2123, Nvidia Quadro P2000, 16gb RAM The machine is like new, in working condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Press force: 36 t Bending length: 1020 mm Clearance between frames: 932 mm Throat depth: 150 mm Stroke: 120 mm Usable installation height: 295 mm Y-working speed: 10/25 mm/sec Y-rapid traverse: 220 mm/sec Working height: 1150 mm Machine weight approx.: 2,600 kg Guodpfx Agoyz Rwispob Space requirement approx.: 1805x1330x2380 mm Operating hours: 3,297 h

Condition: excellent (used), Double head cylinder projection welding machine DALEX PMS 14-4 Nominal discharge: 350 mm Rated power at 50 % ED: 160 kVA Sec. short-circuit current: 79.4 kA Sec. open-circuit voltage: 5.8 - 9.74 V electrode force: 120-720 daN equipped with 2 double lifting cylinders with additional stroke add-on switch cabinet according to VDE 0100 Main switch 4-step switch Synchronous welding control with monitoring function MPS 8043 Q1 Current measuring belt Cylinder in cascade or synchronous circuit Weight: 1090 kg Machine is in refurbishment Guedpsd Ip Alofx Agpeb

Condition: ready for operation (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm Gsdpfjxbh Euex Agpjub control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: excellent (used), Spot welding machine with single-acting cylinder and flange-mounted electrode holders above and below Make: DALEX Type: PMS 14-3 Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 54.5 kA Secondary open circuit voltage: 7-14 V Electrode force: 80-1,200 daN Equipped with: 8-step switch Main switch Attached control cabinet HARMS+WENDE Synchronous welding control MPS 200 8 welding programs with AEG nameplate Guodpfotuwz Iex Agpjb Start via foot pedal