Tool Room Milling Machine - Universal

DECKEL FP3L

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Cpedpeh Sptnsfx Aa Nsw Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: excellent (used), Year of construction: 1986, Conventional lathe, make: VDF HEIDENREICH&HARBECK, model: 540 Hamburg, year 1986. In very good original condition with 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes including the compound slide. Equipped with coolant system, swarf back panel, and machine documentation. 315 mm Forkardt chuck. Swing diameter: 540 mm. Turning length: 1500 mm. Spindle bore: 103 mm. Spindle speeds: 9–1800 rpm. Multifix C tool post. Fixed steady rest. Swarf protection cover. For further details, see the technical data sheet. Space requirement: length 3.8 m, width 2 m with back panel, height 2 m with back panel. Weight approx. 3500 kg. Cpsdpfx Aajx Hr Duj Now

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) Codpfx Aevn N Hdsa Njpw >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on.

Year of construction: 1975, condition: good (used), Cover FP3L with.adjustable angle table , vertical milling head,SK 40 S20x2 spindle mount . Good working condition. After consultation under power ready for demonstration. Cjdpfx Aaoildwxe Nspw

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 Cedpju Aa I Ssfx Aa Nspw W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 1975, Cover FP3L with.3-axis Heidenhain digital readout , rigid table , vertical milling head , SK 40 S20x2 spindle mount . Good working condition. Ready for demonstration under power by arrangement. Cedpfxouclbze Aa Nopw

Condition: reconditioned (used), Year of construction: 1988, Universal tool milling machine Make: DECKEL Model: FP 3 L Active Year of manufacture: unknown - overhauled, repainted, RAL7035 light gray / RAL7012 basalt gray RAL5008 gray-blue Mach. no.: 2302-2319 Milling head type: 2271 Milling head number: 700-0883 with guarantee geometric acceptance with test report Accessories: - 3-axis active digital display HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with Tightening thread S 20 x 2 Cpedpfsh Rv U Eox Aa New - Central lubrication, electric - Coolant system - Operating instructions - Drill grinding device with diamond disk -used, as seen-

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Cpedpfx Aastzgaqe Now Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Cjdowg S Nkjpfx Aa Nspw

Condition: used, Year of construction: 1979, x-travel 800 mm y-travel 300 mm z-travel 400 mm turning speed range 25 - 2.000 U/min power capacity 4 kW feed 5 - 500 m/min rapid traverse 1,5 m/min work table: 1.000 x 700 tool taper SK40 weight 1,8 t dimensions of the machine ca. 2,50 x 2,40 x 2,00 m Cpodpfx Aaewwwqho Njw The machine is in good condition. The digital display is defective (the scales are ok) Extra interchangeable milling head. No accessories.

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Cpedpfjfww Sqex Aa Nsw Please do not hesitate to contact us.