Double-head cutting saw

Emmegi Sirio 2

Year of construction: 1993, condition: used, Max. sawing length: 5000 mm Max. saw blade diameter: 450 mm Automatic positioning of length and angle (90° or 45°) Moving roller conveyor material support Njdpevdp Rzjfx Afwolf Minimum quantity spray device

Condition: good (used), Year of construction: 1994, 2-sided planing machine, top and bottom Constant table (always the same feed height) Max. planing width: 600 mm Max. planing height: 280 mm Planer shafts with strip knives Ready for immediate use. Nlodpehuthysfx Afwjf

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Nlodpfx Afou R Szaewef Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Condition: new, Year of construction: 2025, Modern, high-performance, and universal double miter saw for wood, aluminum, and plastic profiles. Stock machine: Subject to prior sale Nsdpfxexta Tuj Afwolf • Large cutting capacity (165 mm cutting depth at the table) • Double cut possible • Stepless fixation of intermediate angles • Pneumatic swivel function as standard • Infinitely adjustable hydropneumatic saw feed • Torsion-resistant machine bed • Swivel range for both units: 22.5° inward, 90°, 135° outward • Precision-ground saw table / base plate • Direct position measurement system (magnetic sensor) available in all versions • JETTER drives and controls • 15″ industrial touch panel (IP65)

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Nodpfxovwbp Aj Afwjlf

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) Nedpoiidm Nefx Afwelf - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2022, Electronic Double Head Cutting Saw – PERTICI 500TS / 500TS-22 Nedpfjy Rl Syex Afwslf Electronic double head cutting saw by PERTICI INDUSTRIES, designed for high-precision cutting of PVC and light alloy profiles. The machine is equipped with a fixed left head and a movable right head with automatic linear and angular positioning electronically controlled. Ideal for the professional production of windows and doors. Main features Automatic double head cutting saw Movable right head with automatic positioning Automatic head rotation: 90° / 45° (500TS) 90° / 22.5° (500TS/22) Programmable electronic control 15” TFT Touch Screen monitor USB and Ethernet ports Windows CE / Windows Embedded operating system Cutting list optimization Automatic profile height correction Possibility to work with one head only Full pneumatic safety guards Two-hand safety cutting control system Machinable materials PVC Plastic materials Light alloys / aluminium Cutting capacity Available lengths: 4,000 mm 5,000 mm 6,000 mm Maximum cutting length: up to 6,100 mm Blade Ø 500 mm (optional Ø 520 mm) Automatic cutting angles: 90° 45° 22.5° (TS/22 version) Technical data Number of blades: 2 Motor power: 4.4 kW each Blade speed: 2800 rpm Power supply: 400 V three-phase Air pressure: 6.5 – 8 bar Weight: approximately from 1670 to 1910 kg Blade peripheral speed: up to 76.2 m/s Equipment Horizontal and vertical pneumatic clamps Side roller supports Full cutting area safety protections Industrial label printer preparation 15” Touch screen on Windows platform Profile thickness probe (electronic profile thickness detection device) – photo no. 7 Central anti-bending profile support – photo no. 8

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Nljdpfx Aeymcncefwsf Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides Njdpfstv Rgrjx Afwolf * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: excellent (used), Year of construction: 2019, Maximum swing range (vertical axis of the electric spindle): 1650 – 2350 – 3000 mm Vector speed (X-Y) (PRO-SPEED): 85 m/min Programmable speed in Z-axis: 30 m/min Element passage: 170 mm Multifunction device BRC-K: Technical specifications (Gr-Multif_BRC-K_2.1_N5.1-0.6) 1) Performance: Motor 3.6 kW (S6 - 40%) Number of poles: 2 Speed control: via CNC with frequency inverter Cooling system with fan 3) Horizontal milling spindle: Tool holder: ER25 Spindle speed: 6000–18000 rpm Rotation direction: clockwise/counterclockwise Nlsdsyffh Nopfx Afwef Max. tool dimensions: L1 = 151 mm / W1 = 120 mm / D = 20 mm Max. tool dimensions 2: L2 = 111 mm / W2 = 80 mm / D = 20 mm Max. machining depth: 115–75 mm