Injection cylinder 4450 unit

ENGEL

Year of construction: 2016, operating hours: 48,336 h, condition: ready for operation (used), This Engel victory 1800/300 was manufactured in 2016. A hydraulic injection moulding machine with a 300-ton machine power, it features a screw diameter of 60 mm and supports up to 16 hot runners. Equipped with four hydraulic core pullers and a Viper 12 robot, it offers enhanced automation capabilities. Contact us for more information about this machine. Csdpfjx U Dp Esx Aa Nepw • Machine power (tons): 300 • Between columns w x h (mm): 750 x 1000 • Min. mold height (mm): 400 • Max. mold height (mm): 900 • Max. distance between plates: 1300 • Diameter of center ring / height: 160/15 • Diameter of thread on ejector coupling: M24 • Diameter of screw (mm): 60 • Hot runners: 16 • Hydraulic core pullers: 4 • Robot: Viper 12

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Cpodeh Di H Djpfx Aa Njw -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Year of construction: 2004, condition: ready for operation (used), controller manufacturer: ENGEL, controller model: n/a, overall weight: 10,500 kg, This Engel Elast 1500/250V was manufactured in 2004. It's a vertical injection moulding machine designed for precision and efficiency in plastic processing. Consider the opportunity to buy this Engel Elast 1500/250V vertical injection moulding machine. Contact us for more information. Machine Benefits Technical Machine Benefits • 3 machines available - note that one of the available machines has a defective control unit. • Rated voltage: 3 x 400v • Frequency: 50 hz • Connected load: 64kw • Rated current: 107a • Control voltage: 230 v Extra Information Machine still under power Cpjdpox U U Ixefx Aa Njw

Condition: ready for operation (used), Year of construction: 2003, operating hours: 1,496 h, clamping force: 600 kN, screw diameter: 35 mm, Injection Unit Screw diameter 35 mm Clamping Unit Clamping force 600 kN This Engel Victory 200/60 TECH was manufactured in 2003. It features a screw diameter of 35 mm, clamping force of 600 kN, and an opening stroke of 450 mm. The machine includes a robot and has a maximum platen spacing of 700 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 200/60 TECH machine we have for sale. Contact us for more information. Application Types Injection Moulding Cpodjx D Dkxjpfx Aa Now

Condition: reconditioned (used), Year of construction: 1983, Power: 2.000 kN Frequency: 60 rpm Stroke, adjustable: 20 - 120 mm Daylight: 450mm (max. stroke up) Ram adjustement: 100mm Size of bolster: 850 x 810mm Opening in bolster: 00 x 50mm Ram area: 750 x 810mm Motor power: 22 kW equipped by: Codpfogpxc Ssx Aa Njpw - 1pc. con rod - 6pc. guideways - hydraulic overload - motorized oil lubrication - motorized ram adjustment - manuel stroke adjustment - pneumatic ram balancing cylinder - anti vibration machine feet

Condition: ready for operation (used), Year of construction: 2012, operating hours: 73,437 h, clamping force: 1,600 kN, screw diameter: 45 mm, total height: 2,095 mm, overall weight: 8,700 kg, product length (max.): 5,155 mm, This Engel VICTORY 650/160 tech was manufactured in 2012. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes, with a clamping force of 1600 kN and a screw diameter of 45 mm. It's equipped with a robot, ensuring efficient automation. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 650/160 tech machine we have for sale. Contact us for more information about this machine. • Operating hours: 73,437 h • Condition: Excellent • Status: In production • Maximum injection volume: 318 cm³ Cpjdsx Nr Huspfx Aa Nsw • Minimum mould height: 292 mm • Maximum mould height: 900 mm • Platen opening stroke: 609 mm • Platen dimensions: 750 × 750 mm • Tie-bar distance: Tie-bar-less design • Motor power: 22 kW • Heater power: 13.35 kW • Number of electrical connection pins: 16 • Injection nozzle radius (tip): R35 • Centering ring diameter: 125 mm • Number of cores: 0 • Number of heating zones: 0 Additional equipment • Equipped with robot: Yes • Robot interface: Euromap 67

Condition: ready for operation (used), Year of construction: 2013, operating hours: 65,000 h, clamping force: 5,000 kN, screw diameter: 90 mm, total height: 2,355 mm, overall weight: 14,000 kg, product length (max.): 7,800 mm, This Engel DUO 4550/500 pico was manufactured in 2013. It features a clamping force of 5,000 kN, a screw diameter of 90 mm, and a maximum injection volume of 2,480 cm³. The machine dimensions are 7,800 x 2,405 x 2,355 mm, and it weighs 14,000 kg. Currently in production with approximately 65,000 operating hours, it remains in excellent condition. Contact us for more information about this machine. • Maximum injection volume: 2,480 cm³ • Minimum mold height: 350 mm • Maximum mold height: 900 mm • Platen opening stroke: 1,300 mm Cpedjx Nr Uxspfx Aa New • Platen dimensions (W x L): 1,270 x 1,260 mm • Tie-bar distance (H x V): 910 x 830 mm • Motor power: 83 kW • Heater power: 61.2 kW • Number of electrical connection pins: 32 • Injection nozzle radius (tip): R35 • Centering ring diameter: 200 mm • Robot interface: Euromap 67 • Number of cores: 0 • Number of heating zones: 0 • Operating hours: approx. 65,000 h • Condition: Excellent • Status: In production Additional equipment • Robot (equipped)

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 10014777, overall weight: 1,300 kg, load capacity: 210 kg, arm reach: 2,696 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet and the associated cables. The robots come from a functioning system and have been professionally dismantled. We carry out a functional test and check the robots. If you are interested, we offer the opportunity to demonstrate the functions to ensure that they meet your requirements. - Supplement at additional cost - We are pleased to be able to offer you a new function for our robots: The Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency stop function, a safety gate and a start-stop connection via the Profisafebus. The controller is fully configured and programmed so that you can implement a simple stand-alone solution with a robot and a safety fence. If required, we can also offer you additional support during commissioning. We grant a 14-day right of return. Further warranty services are excluded. Cedpfxeq Suwbs Aa Nopw We have an extensive stock of these robots and the prices quoted are package prices. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale exclusively to traders.

Condition: ready for operation (used), Year of construction: 2021, clamping force: 800 kN, screw diameter: 35 mm, injection weight: 140 g, Hydraulic injection moulding machine manufactured in 2021. This Engel Victory 320/80 spex features a clamping force of 800 kN and an opening stroke of 450 mm. The machine has a maximum daylight of 750 mm and a mould height minimum of 300 mm. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 320/80 spex machine we have for sale. Contact us for further details. • Opening Stroke: 450 mm • Max. Daylight: 750 mm • Mould Height (Min.): 300 mm • Platen Size (H x V): 670 x 600 mm Cpsdpfx Aeymawuoa Now • Tie-Bar Distance: Tie-barless (N/A) • Shot Volume: 154 cm³ • Injection Pressure: 2,040 bar • Control System: CC100 / CC200 / CC300 (Depends on Year)

Condition: ready for operation (used), Year of construction: 2015, operating hours: 27,137 h, General Data Machine weight 2900 kg Measurements height 1780 mm Dimensions Machine Length 3179 mm Injection Unit Screw diameter 25 mm Cpedpfsx Nkn Dex Aa New Clamping Unit Clamping force 400 kN This Engel VICTORY 200/40 tech was manufactured in 2015. It features a tie-bar-less design, enhancing flexibility and accessibility for various mould sizes. With a clamping force of 40 tons and a screw diameter of 25 mm, it supports a maximum injection volume of 69 cm³. The machine includes a robot interface (Euromap 67) and is still in production, showcasing its reliability and excellent condition. Contact us for more information about this machine. Application Types Injection Moulding

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Cpedshck S Ejpfx Aa Nsw Good condition! Inlet: 6" - Outlet: 6"

Condition: ready for operation (used), Year of construction: 2015, operating hours: 37,235 h, General Data Machine weight 5300 kg Measurements height 1932 mm Dimensions Machine Length 3974 mm Injection Unit Cpsdpfx Aajx Nr Hzj Njw Screw diameter 35 mm Clamping Unit Clamping force 800 kN This Engel Victory 330/80 Tech was manufactured in 2015. It features a clamping force of 800 kN, a screw diameter of 35 mm, and a maximum injection volume of 154 cm³. The machine dimensions are 3974 x 1437 x 1932 mm, weighing 5300 kg. Currently in production with excellent condition and 37,235 operating hours. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 330/80 Tech machine we have for sale. Contact us for more information. Application Types Injection Moulding

Condition: ready for operation (used), Year of construction: 2000, operating hours: 63,929 h, clamping force: 2,000 kN, controller manufacturer: ENGEL, controller model: CC 200 (CC200), This 3-axis Engel ES650H/200W-200HL-2F was manufactured in 2000. It features a clamping force of 2000 kN, a tie-bar distance of 920 × 750 mm, and a screw diameter of 50 mm. Equipped with dual injection units, hydraulic locking system, and a rotary table control, it ensures precise and efficient operation. If you are looking to get high-quality injection molding capabilities, consider the Engel ES650H/200W-200HL-2F machine we have for sale. Contact us for more information. • Condition: Well-maintained and serviced • Clamping unit: Cedpfxjyf Htys Aa Nepw • Mold weight: 1500 kg • Total weight: 3000 kg • Tie-bar distance (H × V): 920 × 750 mm • Platen size: 1150 mm • Opening stroke: 700 mm • Daylight (opening): 700 mm • Min. mold height: 450 mm • Max. mold height: not specified • Ejector stroke: 150 mm • Ejector force: 61 kN • Return force: not specified • Centering diameter (A side): 110 mm • Centering diameter (B side): 90 mm • Locking system: Hydraulic / Pneumatic • No. of cores: 4 • Rotary table control: Yes • Core pull control: Yes • Index plate control: Yes • Injection unit 1 (650H): • Max. shot volume: 200 cm³ • Stroke volume: 392 cm³ • Screw diameter: 50 mm • L/D ratio: 20 • Screw speed: 290 rpm • Injection pressure: 1240 bar • Injection speed: 120 g/s • Plasticizing rate: 41 g/s • Nozzle orifice: 15 mm • Pump installed: 30 / 12.3 kW • Injection unit 2 (200W): • Max. shot volume: 140 cm³ • Stroke volume: 69 cm³ • Screw diameter: 25 mm • L/D ratio: 24 • Screw speed: 480 rpm • Injection pressure: 2000 bar • Injection speed: 60 g/s • Plasticizing rate: 12 g/s • Nozzle orifice: 15 mm • Pump installed: ~6.8 kW • Controls and functions: • SPC (Statistical Process Control): Yes • Pressure interface: Yes • 2nd injection barrel: Yes • Mold monitoring: No • Special programs: Yes Additional equipment • Take-out device (robot): ERC 23/1-E • Travels: X = 500 mm, Z = 1400 mm • Max. mold dimensions (Y-axis): 1000 mm • Hot runner control: 18 zones • WZ sensor system: p–z–t–σ (Kistler) • Additional equipment: GealanXcomp • Automation cell: No • Filter dryer: No

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Cpsdpfx Aaoh Nypfo Now

Condition: ready for operation (used), Year of construction: 2004, operating hours: 96,194 h, clamping force: 2,000 kN, screw diameter: 40 mm, injection weight: 216 g, This Engel ES650H/200W-200HL-2F was manufactured in 2004. It features a clamping force of 2000 kN and platen dimensions of 920 x 760 mm. The machine includes a two-component system with screw diameters of 40 mm and 25 mm, and a robot system ERC 23/1-E for enhanced automation. Ideal for precision in hydraulic injection moulding. Contact us for more information about this machine. • Configuration: 2K (two-component injection molding machine) • Clamping unit: • Platen dimensions (H x V): 920 x 760 mm Csdpfxoyfrb Ns Aa Nopw • Mold installation height (min): 500 mm • Opening stroke: 750 mm • Max. daylight (platen distance): 1150 mm • Max. mold weight: 3000 kg (1500 kg per side) • Ejector stroke: 150 mm • Ejector force: 80 kN • Core pulls: 3 (ejector side) • Centering ring diameter (ejector side): 200 mm • Injection unit 1 (Primary - 650H): • Screw diameter: 40 mm • Injection pressure: 1946 bar • Shot volume (swept): 251 ccm • Shot weight (PS): 216 g • Screw speed: 290 rpm • L/D ratio: 20 • Nozzle radius: 15 mm • Injection unit 2 (Secondary - 200W): • Screw diameter: 25 mm • Injection pressure: 2089 bar • Shot volume (swept): 69 ccm • Shot weight (PS): 60 g • Screw speed: 480 rpm • L/D ratio: 24 • Interfaces/Control: Printer interface; process control available Additional equipment • Robot system: ERC 23/1-E linear robot • X-axis stroke: 500 mm • Y-axis stroke: 1000 mm • Z-axis stroke: 1600 mm • Hot runner control: 16-zone