Full gate

Esterer SS45

Condition: new, Year of construction: 2026, Size: 6 Nominal heat output: 170 kW -- Compliant with German Federal Immission Control Ordinance (BImSchV) Stage 2 and CE standards -- Firebox completely lined with refractory bricks Suitable for rooms of: 4,800 m³ (according to DIN) Fuel: Logs, chipboard, wood chips, wood chip briquettes Lhjdpfx Aodlhdbsc Aoh Fuel consumption: 40 - 50 kg/h Blower air capacity, free-blowing: 14,000 m³/h Exhaust outlet: Ø 700 mm Smoke pipe connection: Ø 220 mm Weight: 2,150 kg PLC control cabinet: 380 volts

Condition: used, functionality: fully functional, Infeed: 1,000 x 350 mm, max. workpiece size: 320 x 320 mm, 45 kW electric motor 4-stage vibrating feeder HERWEG, approx. 800 x 4,000 mm, 2 x 4 kW drive with infeed and outfeed hoppers semi-mobile steel structure with platform, railings, and access stairs. Ledpfx Acjwb Dfge Ashh

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements Lhsdpjhlp D Nefx Ac Aeh - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: good (used), Board sorting system / sorting system / length sorting system, Esterer Right-hand discharge 5 sorting bins Total length 26 meters 1. Bin: 2 meters 2. Bin: 3 meters 3. Bin: 4 meters 4. Bin: 5 meters 5. Bin: >5 meters In good condition – immediately available Location: Germany, near Landau an der Isar Please also check out my other listings. Lhedpfxsgw Scqj Ac Aoh I look forward to your inquiry.

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Lhedpfsfv Atlex Ac Aeh Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor!

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Lhodpfoxtwwkex Ac Ajh Sale according to customer order.

Condition: new, Year of construction: 2025, Gannomat Concept 70 Eco Laminate – Body press with rapid traverse Technical data: Laminate body press from our showroom; Working area: width from 150 – 2,500 mm, height from 150 – 1,400 mm; depth 700 mm; - Laminate press beam at the top with 6 elements, laminate press beams on the side with 5 elements - Laminate press beams with proven tolerance compensation for tight body joints - Counterpressure surfaces are 40 mm thick, coated, continuous support plates - The pressing force of the press beams is continuously adjusted electronically via 2 potentiometers and set via a frequency converter, therefore, the torque transmission is absolutely wear-free. Lhjdpfx Asiidm Nec Aeh - Pressing force for horizontal press beams min. 500 daN (kg) to continuously max. 2200 daN (kg) - Pressing force for vertical press beams min. 300 daN (kg) to continuously max. 2200 daN (kg) - Including option: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams, pressing speed 5/10/25 mm/sec. and rapid traverse speed 50 mm/sec, the sensors can be switched off for pressing special parts. - Tapping mode for precise positioning of the two press beams, e.g. for low pressing forces, drawers and bodies at 45 degrees. Simple operation via 6 separate push buttons, freely adjustable preselection of pressing time with automatic opening, loading height 300 mm The machine is in our showroom and can be delivered immediately. Location: in stock at 54634 Bitburg - immediately available -

Condition: like new (used), Manufacturer: Flender Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Lhodpsg Stz Aofx Ac Ash Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control POWERCONTROL + POWERTOUCH Software woodWOP Safety cabin (enclosure) of the working head No. 1 Workpieces fixing clamps (for the panels introduction in the working area Panels feeding by motorized chain/track Minimum workpieces dimensions (X - Y - Z) mm 200 x 70 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 850 x 56 Lhedoyywcvopfx Ac Aeh Total installed power (Kw) 11,5 (ca.) WORKING GROUPS: No. 1 Drilling head (power Kw 2.3) with vertical spindles - No. 13 Independent vertical boring spindles (V13 High Speed) - No. 6 Independent horizontal boring spindles (4 in X + 2 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 100 No. 1 Vertical electro-spindle (HKS63) power Kw 5 Automatic Tools Changing System - Tools storage plate (No. 4 folds-positions)

Condition: good (used), Year of construction: 2006, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, Travel paths Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transverse (Z): 1000 mm Table size (rotary): Length: 1000 mm Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed rates (X, Y, Z): 10 – 10,000 mm/min Rapid traverse (X, Y, Z): 25,000 mm/min Weight: approx. 15,000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD, including minimum quantity oil lubrication with 15 different dosing levels via programmable M-functions; 20 bar - NC rotary table, size 1000 x 1000 mm, integrated as 4th axis into the CNC control. Max. load capacity 5000 kg, positioning accuracy ±5", table surface with 22 mm T-slots. - Chip conveyor for TA-D 25 - Tool changer Accessories Ljdsykbxzspfx Ac Aehh - Front-mounted movable control pendant including Heidenhain iTNC 530 control (1 processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes with 2.5° indexing (H200) (option) - Distance spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, integrated as 4th axis into the machine control. Max. load capacity 5000 kg, positioning accuracy ±5", table surface with 22 mm T-slots - Coolant system with 150 l tank capacity, delivery pressure 5 bar, delivery rate 50 l/min, discharge via shower ring around spindle - Splash guard enclosure, fully enclosed on 4 sides with front sliding doors and an additional sliding door on the left side column and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system Heidenhain on all axes - Telescopic covers for X-axis guideways - Ball screws on X, Y, and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic system by Vickers