Hydraulic welding turn and tilt table

EUEN EU-DKT HV 10000

Condition: good (used), Year of construction: 2012, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL PAA 9001.25 Year of manufacture: 2012 CNC control Working area: 2,500 x 9,000 mm 1 plasma torch with Kjellberg HiFocus 280i power source 2 propane oxy-fuel torches Dedpfxju U Hm Ao Ag Rjur Oscillating conveyor table Beuting Donaldson DFPRO12 outdoor filter unit 17326ä

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning).  Laser pointer (to align and position the torch). Duodpjtp Dhpjfx Ag Rjr  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Duodpohcnhmjfx Ag Ror Mot. tank-boiler turning device with rail trolley Technical data: - Total payload driven + travelling unit 40000 kg. - payload per vessel device 20000 kg - workpiece diameter approx. 500 - 3500 mm - Centre distance of the support rollers adjustable via trapezoidal thread spindle - roller diameter 500 mm - roller width 150 mm - driven unit with drive on both sides - infinitely variable rotational speed - manual remote control for Re- and Li.-run - drive 400 V - Both units are mounted on rail trolleys - space requirement with running unit approx. W 3800 x H 1150 x D 1350 mm - Space requirement with running unit approx. W 3600 x H 1150 x D 1350 mm - Weight attached unit approx. 2500 kg - Weight with running unit approx. 1800 kg

Condition: new, Due to its dynamics and efficiency, the Jantar is the most frequently chosen model of Eckert machines. It is used by large industrial companies and medium-sized businesses looking for both an economical and reliable solution. The Jantar plasma cutting machine can be equipped with a plasma and oxyfuel cutting system and a wide range of accessories. (marking, drilling and machining of tubes and profiles). The design of the machine has been optimized over the years for maximum reliability, as confirmed by hundreds of customers throughout Europe. Main features -attractive price of a very well equipped basic version Dujdpef Alb Ajfx Ag Ror -Highly dynamic and precise cutting of 2D applications, tubes and profiles -cutting capacity from 0,5mm to 100mm material thickness -Comprehensive database with predefined cutting parameters -Possibility to optionally extend the length of the working area Technical data Drive Servo AC Available working widths 1.500, 2.000, 2.500, 3.000 mm Available working length Any length from 1.500 mm positioning speed 25,000 mm/min cutting thickness up to 100 mm Cutting quality DIN-EN ISO 9013 Positioning accuracy DIN-EN 28206 Repeat accuracy DIN-EN 28206 Electrical systems DIN-EN 81346 Safety module DIN-EN 13850 Working height 740-760 mm Working - ambient temperature + 5 °C to 45 °C Working - Humidity max. 90%

Condition: used, Year of construction: 2019, CNC portal plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 4001.20Ptk Year of manufacture: 2019 CNC control Working area: 2 x 4 m Dedpfx Aexnmbnjg Reur Plasma rotator "MasterCut" with fully automatic support for weld seam preparation 1 plasma torch with Kjellberg HiFocus 280i power source TEKA filtration system item no. 17326

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Ficep Tipo G25LG. Full description Is attached as a document. Dedpfx Aeu Dw I Esg Rsur Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: good (used), Year of construction: 2018, Burning and Drilling Line / Plate Processing Center Manufacturer: Vernet-Behringer Model: MAG EVO 420 Year of manufacture: 2018 CNC control system Power Source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm automatic tool turret Tool stations: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring marking: 5 to 40 mm Minimum sheet size: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimension of finished parts: 80 x 80 mm Maximum sheet weight: 2,600 kg and 650 kg/m Dodpfxovzrcze Ag Rsur Feed side: Roller table for flat steel or plates: 4,000 x 2,000 mm Zero position cross feeder Number of carriages: 2 clamping units NC feed carriage, side-mounted 4 clamping grippers (2+2) 3 short-stroke cross feeders Working height: 1,000 mm Discharge side: Discharge roller table with lowerable unloading table and chute into material collection container for unloading small parts. Filter unit including piping High-performance for use with carbide tooling. For drilling, tapping, marking, milling, and plasma cutting of flat steel and plates. Software options for milling and marking LANTEK license included Ref. no.: ä17326 Availability: immediately!

Year of construction: 2014, condition: ready for operation (used), A complete CNC double gantry plasma cutting system Microstep with oxyfuel torch for nesting, bevel cutting and tube processing is available. 1) Plasma cutting system, max. processing length: 16500mm, max. processing width: 2500mm, max. processing width including shaft: 3700mm, max. material thickness VA/structural steel: 20mm/40mm, number of gantries: 2. Gantry 1: with a plasma rotator and a Kjellberg HiFocus 280i neo plasma cutting source. Gantry 2: fully automatic oxy-acetylene torch for possible equipment of a second torch carriage. Pipe cutting device: pipe diameter range: 30mm-700mm, max. pipe length: 16500mm, operating hours: approx. 15000h. 2) Filter system Donaldson Cyclopeel DFPRO 16, volume flow: 16000m³/h, filter elements: 16. Documentation available. On-site inspection is possible. Expected to be available from the end of 2025/beginning of 2026. Pictures are from commissioning in 2014. Duodpfxewmqwyj Ag Rer

Condition: good (used), Year of construction: 2011, CNC Gantry Flame Cutting Machine Manufacturer: Microstep Model: MasterCut-AM 9001.20 Year of Manufacture: 2011 CNC Control: iMSNC with integrated network card Dodpeudn Rzjfx Ag Rjur Working area: 2,000 x 9,000 mm Extraction table 1 oxyfuel torch Cutting thickness up to 150 mm 1 Kjellberg plasma marking unit Laser pointer Technical specifications in detail: 1x oxyfuel torch (fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the gantry Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module Macro Library "AsperWin Select" Module NC Simulator "AsperWin NC-Sim" Module "Plasma Marking" (for scribing) via plasma source Module "THC" / Automatic height control via arc voltage USB 2.0 interface for storage media Remote diagnostics module MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 torch Energy supply cables Gas hoses for heating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 unit capacitive height sensing IHT / for oxyfuel 1 unit electric ignition RHÖNA-Acetylene Double-sided cable safety (collision protection) of the gantry bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma marking system FineMarker CNC interface for FineMarker / connection to CNC control Module for automatic control of the marking device

Condition: good (used), Year of construction: 2016, FICEP 1201 FRC Minimum Profile mm 80 x 42 Maximum Profile mm 1220 x 60 1 x OXY FUEL Cutting Head 1 x HYPERTHERM HPR 260XD Plasma Torch. Duodpfx Ageva Hfns Rsr Dust extraction system.