Finger joint line

FAMAD HSKG 6050

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Nsdpfx Ahjtrl R Ae Ujdf Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Year of construction: 1992, condition: excellent (used), E.Gillet vertical sawmill cutting line. Njdpfx Aei Egn Ueh Uodf Wood feeder and receiver included. Maximum cutting length 6.5mb Very good condition.

Condition: new, with planing spindle Type R-R-RP1300 Ndodpfxsd H Sc Ee Ah Ujf Working width 1300 mm Min. working length 538 mm Working thickness 3-110 mm Feeding speed 6-30 m/min Total motor power 77,12 kW Motor for first unit 22 kW Motor for second unit 30 kW Motor for third unit 18,5 kW Abrasive belt size 1330x2200 mm Working air pressure 0,55mpa Volume of dust collection device 12000 m3/h Transport dimensions 3090x2020x2260 mm Weight 4700 kg

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Njdpfxelu D Tfj Ah Ujdf Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi Nsdpfx Aevx Afneh Uedf 4+4 motors Opening side up to 3000 mm

Condition: new, Year of construction: 2025, flue capacity: 510 kW Conventional yeld capacity: 407 kW flue diameter: 250 mm hot air delivery pipes: 4 x 350 mm flue length: 1900 mm oven width: 900 mm oven hight: 900 mm air flow: 26000 m³/h power consumption: 4500 W aproximate surface to heat up: 8000 m³ Ndedok Utrwopfx Ah Uof area to be heated: 1800 m² heater height without hot air conveying pipes: 3000 mm heater width: 1220 mm heater length: 2700 mm weight: 1575 kg

Condition: ready for operation (used), Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: Ndjdpfx Asq A Supoh Uof 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Induction cookers EKU C-I-750-EST-4-3.5 with dimensions 80 x 75 x 80 cm PAULUX dimensions 40 x 50 x 35 cm Fryers with dimensions 80 x 80 x 80 PAULUX 80 x 80 x 80 cm 2 pieces PAULUX 60 x 80 x 35 cm Shelves with dimensions 190 x 50 x 40 cm 3 pieces 140 x 40 x 80 cm Toaster oven dimensions: 40 x 65 x 30 cm 2 pieces Water conditioner Thermos A set of shelves with shelves Hoods with dimensions 320 x 90 x 55 cm 100 x 45 x 60 cm 80 x 55 x 90 cm 160 x 45 x 100 cm 96 x 45 x 100 cm 90 x 80 x 150 cm 60 x 43 x 70 cm And other smaller devices visible in the photos

Condition: used, Year of construction: 2010, Chalet construction machineused, good condition, little usedmake Krüsitype CMI 40year of manufacture 2010CE type-approvedbsi 140 mm round timber corner jointssaw 1xdrilling 1xrouting 3xworkpiece height 200 mmworkpiece width 250 mmweight approx. 2200 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in actual condition as inspected,without guarantee and warranty Ndedevwfqqspfx Ah Uef

Condition: used, Press system : Continuous / Calender Major suppliers : Bison / Berstorff Design capacity : 160 m³/day Capacity achieved approx. : 200 m³/day Effective working time : 23 h/day Reference thickness : 3,2 mm Max. gross board width : 2500 mm Max. net board length : 2440 mm Max. net board width : Unlimit Min. net board width : 1220 mm (splitting) Min. board thickness : 2,0 mm Max. board thickness : 10 mm Nodpfx Aeul H Nmoh Uedf Electric system : 380 V, 50 Hz Year of manufacture : 1985 Major upgrades : 2007-2009, 2016 Operated until : May 2018

Year of construction: 2004, condition: ready for operation (used), Max. working width: 1000mm, feed rate: 5-20m/min, height: 2200mm, length: 4000mm, weight: 3.3t, with documentation, was maintained regularly. Ndsdpji E Trpjfx Ah Uof