Edgebander

Felder G680

Year of construction: 2004, condition: excellent (used), Four-side planer Gusdpfx Aehlp D Njm Asc -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Colour: Grey Weight: 1.250 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 Gsdoyu Thcopfx Am Aeuc - └ 1st unit type: Pre-milling unit - - Tools available: Yes - └ 2nd unit type: Glue unit - └ 3rd unit type: Pressure rollers - - Tools available: Yes - └ 4th unit type: Cap unit - - Tools available: Yes - └ 5th unit type: Rough milling unit - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: Flat scraping unit - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Panel saw HOLZ-HER 1255 SECTOR pro - Exhibition machine - Cutting height 2,200 mm Cutting length 5,300 mm Vertical perfection from HOLZ-HER The vertical panel saws from HOLZ-HER combine proven technology from over 50 years of experience and a rock-solid design that offers you a unique price-performance ratio. offer you a unique price-performance ratio. Your advantages: - Fully welded frame Extremely high rigidity - Precise cutting quality - Finished cut for immediate edge banding - Powerful saw motor with 4 kW output - Space-saving panel layout with a installation area from 4 m² Guedpfxou R Syis Am Aoc - Smooth and ergonomic operation TRK extraction system (optional in all CE countries): Workstations must meet the highest requirements when it comes to health and safety. HOLZ-HER saws are among the cleanest and safest in the safest in the world. Accessories The extensive range of accessories extends from convenient digital dimension displays through to our our patented Super Cut plus scoring system. TECHNICAL DATA Vertical panel saw for cutting panel-shaped wood materials wood-based materials such as chipboard, MDF, veneer panels, multiplex, etc, veneer panels, multiplex etc. Basic machine: Completely welded frame with extremely high rigidity. Precise guidance of the saw beam / saw unit saw unit for an accurate cut. Manual feed feed for vertical and horizontal cutting. Cutting depth: max. 60 mm Saw beam: Sturdy saw beam guided on precision guides. Pneumatic locking of the saw beam at the top and bottom. Electrically monitored in vertical cut Saw unit: Smooth and ergonomic operation for plunging and and removal of the saw unit. Immersion lever can be lever can be folded down in the upper position for precise immersion of the saw unit. Generously dimensioned lever for easy pivoting. Housing cover opens the complete opens the complete saw unit for easy tool change change incl. ProLock quick-action chuck. Light cut-out: Riving knife can be retracted. Control panel: Efficient operation of the machine. Ergonomically positioned at eye level. Lower workpiece support: Sturdy, wear-free stainless steel support. Support up to the cutting line: Narrow workpieces cannot tip or fall through Extraction: Effective extraction with two connections: Saw unit Ø 120 mm, frame end Ø 100 mm (with TRK variant) Lifting roller transport system: Manually liftable and lowerable rollers for easy and and gentle panel transport. Measuring tape: For displaying dimensions for horizontal cutting with three manual dimension displays: Absolute dimension from the lower workpiece support Absolute dimension from the middle workpiece support Serial cuts from the top edge of the panel This offer is an equipment package. The following items and options are already included in the price: - Sliding grid - Manual longitudinal stop for vertical cutting - Digital dimension display for horizontal cut - 3 adjustable stop points in the saw beam - TRK SH 2.200 suction device - Strip stop for recurring horizontal cuts - new exhibition machine -

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Guedpoyf I T Ujfx Am Aoc Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Year of construction: 2025, condition: new, Natural rubber Membrane Rubber sheet membrane In the field of 3D Thermoforming, we also offer presses, foil trimming solutions , film storage paternoster, and brushing machines! MEMBRANES for membrane presses Natural rubber The highest quality silicone and natural rubber membranes for each type of membrane press (foil and veneer). NATURAL RUBBER Type: RM-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700 and 2000 mm +/- 5mm rubber: Natural rubber hardness: 42°Shore thickness: 1,8, 2.5 and 4.0 temperature range: min. - 20 °/max. +130°C Gsdpfx Amji E Hp Tj Asuc

Condition: not inspected (used), Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Gedpfxjyq Szte Am Aeuc Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Gsdpfx Amox Rpgbe Aouc Availability: short-term Location: Flörsheim

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Guedpfjxg Igisx Am Aoc

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Godpfxjxix Hxo Am Aeuc Radius scraper: Yes

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrical connection: 3x400V 50 / 60Hz - Cardanic 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - Ceramic bearings including liquid cooling with infinitely variable, height-adjustable dust extraction hood – controlled by electric motor - Full rated power at approximately 12,000 rpm - Speed range: 1,000 – 24,000 rpm - Drive: 3-phase high-frequency motor controlled via inverter - Rotational direction: right/left - 2 controlled compressed air connections - Interface for aggregates - Tool weight (rotating): 6 kg - Maximum saw blade diameter: 350 mm - Spindle cooling: liquid cooling - Continuously adjustable extraction hood - Profit H350 16.30: CNC machining center in gantry design (without tools) with digital drives (driven on both sides). The machine frame of the Profit H350 16.30 is made from thick-walled, electro-welded box sections. The internal steel ribbing in the frame ensures high stability. - Machining area H350 16.30: Axis travel: X = 4,000 mm Y = 1,970 mm Z = 455 mm Working area: X = 3,000 mm Y = 1,500 mm Z = 150 mm clearance height Axis positioning speeds: Depend on the selected safety system (can be taken from the layout). - Gantry drive on both sides - X-axis guidance system: Gusdpfey Ih Rgex Am Aoc The carriage of the X-axis is driven by a rack and pinion with helical, crowned teeth—this ensures maximum precision. The reduction gear guarantees the highest machining quality and repeat accuracy. The slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. - Y-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Y-axis is positioned by a ground ball screw. - Z-axis guidance system: Slideways use recirculating ball carriages running on encapsulated, hardened and ground linear guides. The Z-axis is positioned by a ground ball screw. - Automatic central lubrication: Grease is supplied under control to the guide carriages of the X, Y, and Z axes as well as to the recirculating ball screws on Y and Z. Lubrication is performed automatically after a preset interval. - 12-position linear tool changer mounted on the left side of the machine frame, including one pickup station for aggregates: The 12-position linear changer ensures minimal changeover times and offers ample space for milling tools. One station for aggregates (see layout for configuration options). Maximum tool diameter: 250 mm Maximum tool length: 240 mm - Drill head DH 18 6H 1S: Vertical: 12 spindles—7 in X-direction and 5 in Y-direction. Horizontal: 6 spindles—4 in X-direction and 2 in Y-direction. Stroke = 70 mm; max. drill length = 70 mm; shank diameter = 10 mm. All spindles individually driven and selectable. 1 grooving saw in X-direction; maximum saw blade diameter 120 mm.