Edgebander

FRAVOL RX 300

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi Duodpevx Afnsfx Ab Eel 4+4 motors Opening side up to 3000 mm

Condition: used, Holz Her Auriga 1308 FÜ + PU Compact design - Edge thickness 0.4 - 8 mm PLC screen control Edge-Control PPC 221 color display Pre-milling unit for edge preparation before the gluing section Fully automatic edge magazine for both coil and strip material Gluing unit GLU JET cartridge + PU bonding - multi-system Adhesive application via nozzle technology Workpiece height 6-65 mm Automatic glue height adjustment Pressure unit 1912-3 pneumatic End trimming unit 1918 pneumatic for coil and strip material up to 8 mm edge thickness With pneumatic adjustment from 0-10° mitre for trimming saws Milling unit for flush trimming 8 mm, corner rounding, bevel trimming at 15° via control panel Profile trimming unit 1832 pneumatic, rounds corners up to 3 mm edge thickness in throughfeed Scraper unit for bevels and radii Dusdpfxsxrr Uze Ab Ejl Flat scraper unit – finish Spraying device – PU Complete set of DIA tools included Machine is WORKSHOP-REFURBISHED in TOP CONDITION Available from stock in Lieboch

Condition: used, Year of construction: 2010, Touch screen control for adjusting work groups Panel height mm from 10 to 50 Solid wood 12 mm Pvc/Abs mm from 0.4 up to 3 Feed speed up to 22 m/min Minimum panel length 150 mm Minimum panel width 70 mm Working height adjustable electronically by C.N. Motorized rubberized belt with superior pressure Panel support guide Side roller conveyor with idle wheels for panel support Anti-adhesive group Rectifier group with two motors of 1.5 KW each Reel holder plate COMBIMELT gluing unit for hot melt glue with automatic dosing VarioMelt with pre-melter Patented edge pressure unit with segmented pads Trimming unit with 2 motors Gleaning unit with 2 motors Rounding unit Djdpfx Aepzfcgjb Eeul Edge scraper unit Installed power KW 13.7 Machine length mm 6170 approx TECHNICAL DETAILS TO BE CHECKED

Condition: used, Engine power: 13.59 PS/HP (10.0 kW), year of manufacture: 2012, boom table: with degree grid index, format sliding table: 3200 mm, parallel stop: 1000 mm, tool compartment, spray device, stepless speed Duedovwl Ezspfx Ab Esl

Condition: excellent (used), SICAR Forte 400 thicknesser Working width 400mm Planing height 300mm Duedpfx Aet Rp Hxob Esl Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Duodpfsi Hn Srsx Ab Esl Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: used, machine/vehicle number: 007913, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Maximum panel thickness: 60 mm Dusdowkf Dvepfx Ab Esl Operating Units: 7 nr

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Equipment and technical specifications: - Round tank glue application unit - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front/end trimming - Top/bottom milling units: 2 milling units with copy wheels for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing radii - Surface scraper: for smoothing the edge surfaces - Buffing unit: 2 buffing wheels with motors for final finishing - Riepe spraying device - Control: PLC with operator panel - Feed frequency inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3 – 12 mm Dodpfx Ajxdpm Seb Esul - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: Short notice Location: Bavaria

Condition: good (used), Code: 0186 Brand: BIESSE ARTECH Model: AKRON 420 - CE Standard Automatic edge bander for wood, Pvc, Abs, and melamine edges for carpentry, furniture, kitchens, custom-made furnishings, panels and various - CE Standard Technical data: Panel height 10-60 mm Min/max edge thickness 0,4-6 mm Minimum panel length 140 mm Minimum panel width 50 mm Track feed speed 12 mt/min Dodpew D E Diefx Ab Esul Protective cabin Composition: Gluing unit: Glue tank capacity 2 kg - Shear for 3 mm roll edges End tcutting unit: n° 2 independent high-frequency motors 0,5 Kw - Inclination from 0 to 15° Tilting fine finishing unit: 2 independent high-frequency motors 0,65 Kw , tiltable from 0 to 25° Brush unit: Brush diameter mm 150 - Motors Kw 0,37 each Suction port diameter mm 150 Compressed air 7 bar Overall dimensions mm 3200 x 1000 x 1500 h Weight kg 900

Condition: used, Year of construction: 2009, Numerical control POWER CONTROL PC 22 Machine suitable for 1st + 2nd passage of the panel Mobile shoulder opening motorized by N.C. mm 3000 Maximum panel height mm 60 PVC-ABS edge thickness mm 3 Feed speed mt/min 40 Feed speed with rounders mt/min 20 Djdpfx Ajpp Tkfjb Esul Motorized pressure rubber belt Bearing track with retractable pin (distance between pins mm 500) Squaring part composed of: Anti-adhesive group Timed automatic anti-splinter group Double shredder group Free space for any group addition Gluing unit with pre-melter and glue pot Automatic adjustment of the edge pressure rollers Edge holder magazine with 2 positions Trimming unit with two motors Overlapped trimming unit FK rounding unit Edge scraper unit Glue scraper group Brush group Anti-adhesive group